Chemische Vitamin D<Subscript>3</Subscript>-Bestimmung in Lebertran

The different aspects of Vitamin D₃ determination and the data reported in the literature are discussed. The spectrophotometric determination of Vitamin D₃ in cod-liver oil is carried out after the alkaline saponification, extraction of unsaponified parts, precipitation of accompanying sterols and the column- and thin-layer chromatographic purification and separation of vitamin D₃ on 40 cm plates from other vitamins. The dyestuff α-naphtholbenzein is suited well as standard substance for the better location and identification of vitamin D₃ zone on the thin-layer plate. The results obtained from the chemical method were checked through the simultaneous biological determination.     

Direct determination of cadmium at parts-per-billion level in waters by derivative atomic absorption spectrometry using atom trapping technique

A method has been described for the direct determinations of trace cadmium using derivative atom trapping flame atomic absorption spectrometry with an improved water-cooled stainless steel trapping equipment. The characteristic concentration (gave a derivative absorbance of 0.0044) and detection limit (3sigma) of cadmium were 0.028 and 0.02 ng ml(-1) when collecting for a 1 min, respectively, which were 992 and 145-fold better than those of the conventional flame atomic absorption spectrometry. The detection limit and sensitivity of the proposed method for a 2 min collection time were 1 and 2 orders of magnitude higher than those of conventional flame atomic absorption spectrometry. The present method was applied to the determinations of cadmium in water samples with a recovery range of 91 approximately 111% and a relative standard deviation of 4.7 approximately 5.6%.     

Quantum scattering calculation of the O(1D)+HBr reaction

Three-dimensional time-dependent quantum wave packet calculation for the O((1)D)+HBr reaction has been carried out using an accurate ab initio global potential energy surface [K. A. Peterson, J. Chem. Phys. 113, 4598 (2000)]. The calculations show that the initial state-selected reaction probabilities are dominated by resonance structures, and the lifetime of the resonance is generally in the subpicosecond time scale. The energy dependence of the reaction cross section is computed, which manifests still resonance structures, and is a decreasing function of the translational energy. The thermal rate constants are also computed, which are nearly independent on the temperature. The calculation results are discussed and compared to similar reaction with deep well.     

Direct determination of brucine by square wave voltammetry on 4-amino-2-mercaptopyrimidine self-assembled monolayer gold electrode

4-Amino-2-mercaptopyrimidine self-assembled monolayer (AMP SAMs/Au) was prepared on a gold electrode. The AMP SAMs/Au was characterized by using attenuated total reflection-fourier transform infrared (ATR-FTIR) and A.C. Impedance. The electrochemical behavior of brucine on AMP SAMs/Au was studied by cyclic voltammetry (CV) and square wave adsorptive stripping voltammetry (SWASV). The modified electrode showed an excellent electrocatalytic activity for the redox of brucine. The catalytic current increased linearly with the concentration of brucine in the range of 4.0 x 10(-7) to 2.0 x 10(-4) mol l(-1) by square wave voltammetry response. The detection limit was 6.0 x 10(-8) mol l(-1).     

Preparation of 103Pd seeds Part II. “Molecular Plating” of 103Pd onto copper rod

A method for ¹⁰³Pd molecular plating onto the surface of the copper rod is reported. The optimal composition of the plating bath was: palladium chloride 2 g/l, ammonium hydroxide (28%) 150 ml/l, sodium hypophosphite 12 g/l, and ammonium chloride 37 g/l. The whole procedure of ¹⁰³Pd molecular plating will last 50 minutes at 40 °C. This article provides valuable experience for the preparation of ¹⁰³Pd seeds.     

Determination of panaxadiol and panaxatriol in ginseng and its preparations by capillary supercritical fluid chromatography (SFC).

Capillary supercritical fluid chromatographic (SFC) method has been developed for the determination of panaxadiol and panaxatriol in ginseng and its preparations. 0.1 g ginseng or an appropriate amount of its preparations was hydrolysed by 15% H2SO4 in an ethanol:water (1:1 v/v) solution for 4 h followed by 15% NaOH for 0.5 h. The mixture was extracted by cyclohexane. The cyclohexane extracts were purified by a partition column and concentrated by an adsorption column and then analysed by SFC. Methyltestosterone was used as the internal standard.     

双核银络合物[Ag_2(dppm)_2(Py)_2(μ-Cl)]ClO_4的合成与结构

二-(二苯基膦)甲烷(dppm)是一种易与金属形成多核络合物的有机膦配体。我们用dppm作为配体合成了一系列银的多核络合物,并对其结构进行了研究。本文报导了其中一个双核化合物[Ag_2(dppm)_2(Py)_2(μ-Cl)]ClO_4的合成及晶体结构、分子结构的测定。     

Morphology-dependent stimulated Raman scattering (MDSRS)

A novel non-linear Raman spectroscopic technique, which can be used to characterize the chemical composition of the interface region of volatile aerosol particles, is described. The technique is morphology-dependent stimulated Raman scattering (MDSRS). We discuss the phenomenology behind this new optical probe, and present experimental results which show that this technique can be used as quantitative spectroscopic tool. We outline the potential application of MDSRS to in situ gas—aerosol kinetics and dynamics studies.     

Calculation of χ)(3) in He including configuration interaction for XUV photons

We calculate the third-order susceptibility in He for photon energies from 19.5 eV to 24.5 eV in a configuration-interaction calculation, and discuss the role of autoionizing states as a means of enhancing harmonic generation.     

富烯碳原子簇的石墨层间闭合形成机理

本文提出了富烯碳原子簇的石墨层间闭合形成机理，由该机理推出的许多结果与实验事实符合很好。我们认为碳原子簇自由基的快速淬灭及其淬灭速度是富烯碳原子簇形成及其丰度的决定因素。由此得出富烯碳原子簇在给定实验条件下产生的必然性，并预言不同大小的富烯碳原子簇可以通过优化实验条件选择性地合成。