Electrochemical characterization of negative electrodes consisting of surface-modified Zr0.9Ti0.1(Ni1.1Co0.1Mn0.5V0.2Cr0.1)x Laves-phase alloys

Laves-phase hydrogen storage alloy has a high potential for use as negative electrode material as alternative for the misch-metal-based material. In order to improve the energy density and the rate capability of negative electrode, chemical and mechanical modification of Lavesphase alloy with different stoichiometric ratios was carried out. Discharge capacity and high-rate dischargeabilty was evaluated by electrochemical methods and the characterization of Laves-phase alloy was made by X-ray diffraction, SEM observation and PCT measurement. The best result in discharge capacity could be obtained for stoichiometric Laves-phase alloy with a composition of Zr_0.9Ti_0.1Ni_1.1Co_0.1Mn_0.5V_0.2Cr_0.1 by boiling in 10 M KOH solution. On the other hand, the high-rate dischargeability was increased remarkably by introducing mechanical grinding before alkali treatment. The cause for improved performance was discussed on the basis of thermodynamic stability of metal hydride and changes in crystal structure and surface morphology influencing on diffusion coefficient and diffusion path length of hydrogen.     

Electrochemical synthesis of a polypyrrole thin film with supercritical carbon dioxide as a solvent

A conductive polypyrrole (PPy) film was successfully synthesized in a homogeneous supercritical carbon dioxide (scCO2)/acetonitrile (AN) system. The occurrence of a homogeneous supercritical state was confirmed by observations of the phase behavior of the system through a high-pressure cell with a viewing window. The concentration of a supporting electrolyte, tetrabutylammonium hexafluorophosphate (TBAPF6), significantly changed the phase behavior of the scCO2/AN system. The polymerization rate of the film in that system decreased with further addition of CO2. This result suggested that the low viscosity of scCO2 did not play an important role in improving the growth rate of the PPy film. The low polymerization rate might have been due to the electron-transfer resistance arising from the low dielectric constant of scCO2/AN mixture. The roughness of the film prepared in the homogeneous scCO2/AN system was 1/10 that synthesized in AN itself as a solvent. The slow growth of film and the high diffusion rate of the monomer seemed to account for the smooth flat film formation.     

Ratiometric direct detection of nitric oxide based on a novel signal-switching mechanism

A novel fluorescent probe, which could be the first example of a ratiometric molecular probe for direct monitoring of NO production, has been developed using a 'spin-exchange' mechanism.     

A synthesis, including asymmetric synthesis, of α-quaternary α-amino aldehydes from ketones and chloromethyl p-tolyl sulfoxide via sulfinylaziridines

Treatment of 1-chlorovinyl p-tolyl sulfoxides, prepared from ketones and chloromethyl p-tolyl sulfoxide, with N-lithio arylamines resulted in the formation of sulfinylaziridines in good to high yields. The sulfinylaziridines were treated with N-lithio aniline or N-lithio p-chloroaniline to afford α-quaternary α-amino aldehydes in good yields. From α-quaternary α-amino aldehydes, α-quaternary α-amino acid esters and β-quaternary β-amino alcohols were obtained. When optically active chloromethyl p-tolyl sulfoxide was used in this procedure, a method for the synthesis of optically active α-quaternary α-amino aldehydes was realized. The reaction mechanism, including asymmetric induction, for the formation of the sulfinylaziridines is described.     

Improvement of in-gel digestion protocol for peptide mass fingerprinting by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

High-sensitivity, high-throughput analysis of proteins for proteomics studies is usually performed by polyacrylamide gel electrophoresis in combination with mass spectrometry. However, the quality of the data obtained depends on the in-gel digestion procedure employed. This work describes an improvement in the in-gel digestion efficiency for matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS) analysis. A dramatic improvement in the coverage of tryptic peptides was observed when n-octyl glucoside was added to the buffer. Whole cell extracted proteins from S. cerevisiae were separated by two-dimensional gel electrophoresis and stained with silver. Protein spots were identified using our improved in-gel digestion method and MALDI-TOFMS. In addition, the mass spectra obtained by using the matrix alpha-cyano-4-hydroxycinnamic acid (CHCA) were compared with those obtained using 2,5-dihydroxybenzoic acid (DHB). The DHB matrix usually gave more peaks, which led to higher sequence coverage and, consequently, to higher confidence in protein identification. This improved in-gel digestion protocol is simple and useful for protein identification by MALDI-TOFMS.     

A new synthesis, including asymmetric synthesis, of spiro[4.n]alkenones from three components: cyclic ketones, chloromethyl p-tolyl sulfoxide, and acetonitrile; and a formal total synthesis of racemic acorone

1-Chlorovinyl p-tolyl sulfoxides were synthesized from several kinds of cyclic ketones and chloromethyl p-tolyl sulfoxide in good yields. Treatment of the 1-chlorovinyl p-tolyl sulfoxides with cyanomethyllithium at −78°C to room temperature gave spirocyclic enaminonitriles in high yields. Acidic treatment of the enaminonitriles afforded spiro[4.n]alkenones in good yields. By using an unsymmetrical cyclic ketone, α-tetralone, and optically active chloromethyl p-tolyl sulfoxide, this procedure afforded enantiomerically pure spiro[4.5]decenone in good yield with excellent asymmetric induction from the sulfoxide chiral center. By using this method a formal total synthesis of a racemic spirocyclic sesquiterpene, acorone, was realized.     

Rapid determination of 89Sr and 90Sr in radioactive waste using Sr extraction disk and beta-ray spectrometer

A rapid determination method in which beta-ray spectrometry was combined with solid phase extraction using Sr Rad Disk was developed for the determination of ⁸⁹Sr and ⁹⁰Sr in low-level radioactive waste. Various amounts of ⁸⁹Sr, ⁹⁰Sr, and ⁹⁰Y retained by the Sr Rad Disk was measured by a beta-ray spectrometer, and it was found that both ⁸⁹Sr and ⁹⁰Sr were simultaneously determined with <30% error (2σ) at ⁸⁹Sr/⁹⁰Sr radioactivity ratio of 0.3 to 45. The present method was successfully applied to actual radioactive liquid waste samples arising from nuclear facilities in Japan Atomic Energy Agency. Strontium was simply separated from interfering nuclides such as ¹³⁷Cs and ¹⁵⁴Eu, and matrix components by the Sr Rad Disk, and the results obtained by beta-ray spectrometry was in good agreement with that of the conventional analysis.     

Reactivity and catalytic activity of cationic lonomers for the nucleophilic substitution reactions

Polystyrene-based crosslinked cationic ionomers containing ammonium or phosphonium chlorides (AxRCI and PxBuCI) were reacted with decyl methanesulfonate. The kinetic data were correlated with the swelling behavior of the ionomers and the solution viscosity of the corresponding linear ionomers. The reactivity of the ionomers was independent of the particle size of the ionomer beads, indicating no diffusion control of the reaction. The solvent and the ion content of the ionomers greatly affect the reactivity. In nonpolar solvents with a low acceptor number, A_N, such as toluene, the aggregation of ionic groups with an increasing ion content reduces the reactivity. A solvent with a high value of A_N, such as chloroform, led a very low reactivity independent of the ion content. Aprotic polar solvent, such as acetonitrila, promoted the dissociation of the ionic groups and furnished a relatively high reactivity independent of the ion content. Several catalytic substitution reactions were carried out under liquid-solid-solid triphase conditions. The kinetic results were accounted for in terms of slow nucleophile transport and fast chemical reaction within the ionomer particles. © 1994 John Wiley & Sons, Inc.     

Crystal Structure, Electric and Magnetic Properties of Layered Cobaltite β-NaxCoO2

The layered oxide thermoelectric material β-Na_0.67CoO₂ has been studied by powder neutron diffraction, electric and magnetic measurements. This compound includes an edge-sharing CoO₆ slab and a highly vacant Na⁺ sheet in a unit cell (space group symmetry C2/m, a=4.9023(4) Å, b=2.8280(2) Å, c=5.7198(6) Å and β=105.964(6)° at 300 K). The evaluated formal valence of cobalt ion, +3.33(1), is ascribed to the coexistence of Co³⁺ and Co⁴⁺ in the ratio 2:1. Polycrystalline β-Na_0.67CoO₂, a p-type thermoelectric material, exhibits metallic behavior of the electric resistivity below 300 K. The Curie-Weiss-type magnetic susceptibility indicates antiferromagnetic interactions between magnetic cobalt ions in the edge-sharing CoO₆ slab.     

Synthesis of planar-chiral paracyclophanes via samarium(II)-catalyzed intramolecular pinacol coupling

[reaction: see text] A series of [n]paracyclophanediols (n = 8-12) was synthesized by samarium-catalyzed pinacol coupling for their ansa-bridge formation. Enantiomerically pure [n]paracyclophane esters were derived from the diols in a several steps via chiral resolution (for n = 10) or via crystallization-induced asymmetric transformation (for n = 11) by using amino alcohol auxiliaries and their selective cleavages.