Isomerization of aldehyde-2,4-dinitrophenylhydrazone derivatives and validation of high-performance liquid chromatographic analysis

The most widely used method for qualitative and quantitative analysis of carbonyl compounds is the 2,4-dinitrophenylhydrazine method through the formation of 2,4-dinitrophenylhydrazone derivatives. However, this method may cause an analytical error because 2,4-dinitrophenylhydrazones have both E- and Z-stereoisomers. Purified aldehyde-2,4-dinitrophenylhydrazone demonstrated only the E-isomer. However under UV irradiation and the addition of acid, both E- and Z-isomers were seen. The spectral patterns of Z-isomers were different from those of E-isomers and the absorption maximum wavelengths were shifted towards shorter wavelengths by 5-8 nm. An equilibrium Z/E isomer ratio was observed in 0.02-0.2% (v/v) phosphoric acid solutions. In the case of acetaldehyde- and propanal-2,4-dinitrophenylhydrazones, the equilibrium Z/E isomer ratios were 0.32 and 0.14, respectively. However, when irradiated with ultraviolet light at 364 nm, the isomer ratios were increased beyond this constant ratio and reached 0.55 and 0.33, respectively. Zero-order rates for decreases of aldehyde derivatives were observed under UV irradiation (364 nm), however the decreases of concentration were not observed in phosphoric acid solutions. The best method for the determination of aldehyde-2,4-dinitrophenylhydrazones by HPLC is to add phosphoric acid to both the sample and the standard solution, to form a 0.02-1% acid solution.     

Alkenylation of thiophenes at the 2-position with magnesium alkylidene carbenoids

Treatment of magnesium alkylidene carbenoids, generated from 1-chlorovinyl p-tolyl sulfoxides with isopropylmagnesium chloride at −78 °C in toluene, with 2-lithiothiophenes gave 2-alkenylated thiophenes in good to high yields. The intermediate of this reaction was found to be an alkenylmagnesium, which could be trapped with iodoalkanes and ethyl chloroformate. This procedure offers a novel and efficient one-pot synthesis of thiophenes having a disubstituted or a trisubstituted olefin at the 2-position from thiophenes in good yields.     

1,1-bis(trimethylsilyl)-1-alkanols as silylcarbene equivalent

Silylcarbenes are generated by the pyrolysis of 1,1-bis(trimethylsilyl)-1-alkanols with elimination of trimethylsilanol.     

Synthesis, characterization and FET properties of novel dithiazolylbenzothiadiazole derivatives

Dithiazolylbenzothiadiazoles easily obtained have high electron affinity and the FET device of a trifluoromethylphenyl derivative exhibited a good n-type performance with high electron mobility.     

Electrochemical characterization of negative electrodes consisting of surface-modified Zr0.9Ti0.1(Ni1.1Co0.1Mn0.5V0.2Cr0.1)x Laves-phase alloys

Laves-phase hydrogen storage alloy has a high potential for use as negative electrode material as alternative for the misch-metal-based material. In order to improve the energy density and the rate capability of negative electrode, chemical and mechanical modification of Lavesphase alloy with different stoichiometric ratios was carried out. Discharge capacity and high-rate dischargeabilty was evaluated by electrochemical methods and the characterization of Laves-phase alloy was made by X-ray diffraction, SEM observation and PCT measurement. The best result in discharge capacity could be obtained for stoichiometric Laves-phase alloy with a composition of Zr_0.9Ti_0.1Ni_1.1Co_0.1Mn_0.5V_0.2Cr_0.1 by boiling in 10 M KOH solution. On the other hand, the high-rate dischargeability was increased remarkably by introducing mechanical grinding before alkali treatment. The cause for improved performance was discussed on the basis of thermodynamic stability of metal hydride and changes in crystal structure and surface morphology influencing on diffusion coefficient and diffusion path length of hydrogen.     

Effect of cholesterol or phospholipid incorporation on the chemical stability of the muramyldpeptide derivative B30-MDP in mixed vesicles

Application of the muramyldipeptide derivative B30-MDP to liposomal vaccines will aid in the development of improved high immunogenicity vaccines. To give full play to the effectiveness of B30-MDP as a liposomal vaccine, it is important to evaluate the effect of cholesterol, dimyristoylphosphatidylcholine (DMPC) or distearoylphosphatidylcholine (DSPC) incorporation on the chemical stability of B30-MDP and physicochemical properties of B30-MDP/lipid mixed vesicles from the view point of pharmaceutics.The observed degradation rate constants of B30-MDP by hydrolysis in B30-MDP/cholesterol mixed vesicles were increased with increasing concentration of cholesterol, however, those in B30-MDP/DMPC and B30-MDP/DSPC mixed vesicles were unchanged with increasing concentration of DMPC and DSPC. The degradation behavior of B30-MDP was then compared with physicochemical properties of B30-MDP/lipid mixed vesicles, such as membrane fluidity and particle size. It was apparent that the degradation of B30-MDP in B30-MDP/cholesterol mixed vesicles was influenced by the particle size, but not by the fluidity of the membranes. In the case of B30-MDP/phospholipid mixed vesicles, MDP/phospholipid mixed vesicles, the degradation of B30-MDP was not influenced by either the membranes' fluidity or the particle size of the mixed vesicles.It is considered that the degradation of B30-MDP in the mixed vesicles is dependent on the membrane state, and the addition of cholesterol to B30-MDP vesicle inhibits the mutual interaction of MDP regions, whereas the addition of phospholipids hardly influences the mutual interaction of MDP regions, possibly owing to phase separation between B30-MDP and phospholipids.     

Electrochemical synthesis of a polypyrrole thin film with supercritical carbon dioxide as a solvent

A conductive polypyrrole (PPy) film was successfully synthesized in a homogeneous supercritical carbon dioxide (scCO2)/acetonitrile (AN) system. The occurrence of a homogeneous supercritical state was confirmed by observations of the phase behavior of the system through a high-pressure cell with a viewing window. The concentration of a supporting electrolyte, tetrabutylammonium hexafluorophosphate (TBAPF6), significantly changed the phase behavior of the scCO2/AN system. The polymerization rate of the film in that system decreased with further addition of CO2. This result suggested that the low viscosity of scCO2 did not play an important role in improving the growth rate of the PPy film. The low polymerization rate might have been due to the electron-transfer resistance arising from the low dielectric constant of scCO2/AN mixture. The roughness of the film prepared in the homogeneous scCO2/AN system was 1/10 that synthesized in AN itself as a solvent. The slow growth of film and the high diffusion rate of the monomer seemed to account for the smooth flat film formation.     

A synthesis, including asymmetric synthesis, of α-quaternary α-amino aldehydes from ketones and chloromethyl p-tolyl sulfoxide via sulfinylaziridines

Treatment of 1-chlorovinyl p-tolyl sulfoxides, prepared from ketones and chloromethyl p-tolyl sulfoxide, with N-lithio arylamines resulted in the formation of sulfinylaziridines in good to high yields. The sulfinylaziridines were treated with N-lithio aniline or N-lithio p-chloroaniline to afford α-quaternary α-amino aldehydes in good yields. From α-quaternary α-amino aldehydes, α-quaternary α-amino acid esters and β-quaternary β-amino alcohols were obtained. When optically active chloromethyl p-tolyl sulfoxide was used in this procedure, a method for the synthesis of optically active α-quaternary α-amino aldehydes was realized. The reaction mechanism, including asymmetric induction, for the formation of the sulfinylaziridines is described.     

A new synthesis, including asymmetric synthesis, of spiro[4.n]alkenones from three components: cyclic ketones, chloromethyl p-tolyl sulfoxide, and acetonitrile; and a formal total synthesis of racemic acorone

1-Chlorovinyl p-tolyl sulfoxides were synthesized from several kinds of cyclic ketones and chloromethyl p-tolyl sulfoxide in good yields. Treatment of the 1-chlorovinyl p-tolyl sulfoxides with cyanomethyllithium at −78°C to room temperature gave spirocyclic enaminonitriles in high yields. Acidic treatment of the enaminonitriles afforded spiro[4.n]alkenones in good yields. By using an unsymmetrical cyclic ketone, α-tetralone, and optically active chloromethyl p-tolyl sulfoxide, this procedure afforded enantiomerically pure spiro[4.5]decenone in good yield with excellent asymmetric induction from the sulfoxide chiral center. By using this method a formal total synthesis of a racemic spirocyclic sesquiterpene, acorone, was realized.     

Characterization and crystal structures of copper(II), cobalt(II), and nickel(II) complexes with two kinds of piperidine carboxylic acids

Copper(II) complex with -piperidine-3-carboxylic acid ( -Hpipe-3):[Cu( -pipe-3)₂(H₂O)] and cobalt(II) and nickel(II) complexes with piperidine-4-carboxylic acid (Hpipe-4):[M(Hpipe-4)₂(H₂O)₄]Cl₂ (M: Co, Ni) have been prepared and characterized by means of IR and powder diffuse reflection spectra, thermal analysis, and magnetic susceptibility. The crystal structures of these complexes have been determined by X-ray diffraction. The crystal of [Cu( -pipe-3)₂(H₂O)] is orthorhombic with the space group Pbcn. The copper atom is in a square pyramidal geometry, ligated by two carboxylato oxygen atoms, two nitrogen atoms, and a water molecule. One molecule of this complex consists of either -piperidine-3-carboxylic acid or -piperidine-3-carboxylic acid. The crystals of [M(Hpipe-4)₂(H₂O)₄]Cl₂ are monoclinic with space group P2₁/n. In these complexes the metal atom is in an octahedral geometry ligated by two carboxylato oxygen atoms and four water molecules.