Symmetry or asymmetry in cheletropic additions forming cyclopropanes

Cheletropic additions forming cyclopropane rings were studied theoretically. Ten addition paths were traced by means of density-functional-theory calculations. Two 1,4-dienes, 1,4-pentadiene, and tricyclo[5.3.1.0^4,9]undeca-2,5-diene were adopted as substrates. CO, SO₂, C₂H₅PCl₂, CCl₂ and SiCl₂ were employed as cheletropic reagents (Xs). An orbital correlation diagram of the Woodward–Hoffmann (W–H) rule and frontier molecular orbital (FMO) interactions between them were investigated in detail. The FMO interactions, HOMO (1,4-diene)lumo (X) and homo (X)LUMO (diene), work reasonably for the progress of the reactions. Those cause the formation of two C–X bonds and a cyclopropane ring, and alternation of double bonds to single bonds. All the additions are concerted. The easiness of the ring formation depends upon the energy gap between HOMO and lumo and that between homo and LUMO, and the spatial directions of HOMO and LUMO extensions. Symmetry conservation of the W–H rule does not hold necessarily for those addition paths. The symmetry-breaking was discussed in terms of FMO interactions.Acknowledgement This work was supported by a Grant-in-Aid for Scientific Research from the Ministry of Education, Science and Culture, Japan and by Nishida Memorial Foundation for Fundamental Chemical Research.     

The characteristic fragment ions and visualization of cationic starches on pulp fiber using ToF‐SIMS

Time‐of‐flight secondary ion mass spectrometry (ToF‐SIMS) was used to investigate the distribution of cationic starch on pulp fiber. To identify the characteristic fragment ions of the cationic starches, deuterium‐labeled cationic starches were prepared and analyzed using ToF‐SIMS. The starch 2‐hydroxypropyltrimethylammonium chloride derivative generated characteristic fragments at m/z 58 and 59, which were identified as [H₂C?N(CH₃)₂]⁺ and [N(CH₃)₃]^+·, respectively. The fragmentation patterns were also suggested. From the imaging analysis, the adsorption of the cationic starch on fibers was uneven on individual fibers, as well as between fibers. This may have been on account of fiber morphology and structure. On examining scanning electron microscope (SEM) images, the quaternary ammonium starch derivative (QS) did not penetrate the fiber. No migration of cationic starch was observed under various drying conditions. Copyright © 2007 John Wiley & Sons, Ltd.     

Heterogeneous structure of silk fibers from Bombyx mori resolved by 13C solid-state NMR spectroscopy

The molecular conformation of silk fibrion is characterized by solid-state 13C NMR before spinning (silk I structure) and after spinning (silk II structure). We compare native silk fibers with the quasi-crystalline Cp-fraction and a synthetic model peptide (Ala-Gly)15, both of which can be converted either into silk I by dialysis from 9 M LiBr or into silk II by treatment with formic acid. Our results demonstrate that silk II fibers are intrinsically heterogeneous, consisting of beta-sheets, distorted beta-turns, and distorted beta-sheets. This higher-order heterogeneity is revealed by the 13C-NMR Cbeta-peak of Ala, indicating that the Ala side chains are stacked partially in parallel and partially face-to-face, at a ratio of 1:2.     

Surface derivatization of poly(p-phenylene terephthalamide) fiber designed for novel separation and extraction media

The surface derivatization of poly(p-phenylene terephthalamide) fiber was studied. The obtained surface-derivatized filaments were packed into a fused-silica capillary to evaluate its surface characteristics by using GC. As the stationary phase for GC the surface-derivatized fibers showed higher retention for alkanes and alkylbenzenes than that with the untreated Kevlar fiber. The improvements on the retention power and the peak shape were observed on the benzyl-modified fibrous stationary phase. The derivatized fibrous materials were also evaluated as the extraction medium in fiber-in-tube SPE, and the effect of the surface modification on the extraction power was compared to the parent fiber. The results indicated that the modified fiber possessed a higher extraction power than the untreated fiber. Based on the facts, the successful modification of the fiber surface was estimated.     

Purification of enzymes by high-speed gel filtration on TSK-GEL SW columns

The purification of enzymes was investigated by high-speed gel filtration on TSK-GEL G3000SWG columns packed with porous silica gel deactivated by chemically bonded hydrophilic compounds. Crude β-galactosidase from bacterial cells and commercial urease were purified ca. 15-fold in a single gel filtration. These enzymes were eluted within an hour from the column and the recoveries of enzymatic activity were almost 100% although the operation was carried out at room temperature (22°). Samples up to 100 mg could be applied to the column without loss of separation efficiency.     

High modulus polyimide/polyimide molecular composite films that utilize acetylene unit as a crosslink site

Polyimide/polyimide molecular composite (MC) films comprised of a rigid polyimide derived from biphenyltetracarboxylic dianhydride (BPDA) and p-phenylenediamine (PDA) and a flexible polyimide derived from BPDA and bis (3,3'-diaminodiphenyl) acetylene (intA) and/or oxydianiline (ODA) were prepared by blending the polyamic acid solutions in 7 : 3 weight ratio, and then imidizing the blend films. Acetylene content in the flexible polyimide backbone was controlled by the ratio of intA and ODA. Cold-drawing of the blend polyamic acid films, followed by imidization, gives high modulus polyimide/polyimide MC films. The modulus of the MC films increased almost linearly with the draw ratio, reaching 25.5 GPa for the 40% drawn film. Acetylene groups in the flexible polyimide can be thermally cured to crosslink. The onset of exotherm appeared at 340°C on DSC, reaching maximum at 398°C. After the thermal crosslinking, the MC films maintained the high modulus, though elongation became small. Taking advantage of the crosslinkable acetylene units, two MC films were laminated and processed at 400°C for 20 min under 100 kg/cm² to give a good-quality laminate film. The interface of the two films was strongly bonded through the crosslinking of acetylene groups. Laminate films maintained the high modulus afforded by the cold-drawing. © 1994 John Wiley & Sons, Inc.     

Highly regio- and stereoselective hydrometallation reactions of fluorine-containing internal alkynes: Novel approaches to fluoroalkylated alkenes

Hydroalumination, hydrocupration, and hydroboration reactions of various fluorine-containing alkynes were investigated. The alkyne reacted smoothly with 2.0 equiv. of Red-Al at −78 °C to give the hydroaluminated adduct in a highly regio- and stereoselective manner, which was treated with iodine, the corresponding vinyliodide being produced in moderate yield. Hydrocupration of the alkynes also took place, but the resulting vinylmetal reacted with various electrophiles sluggishly. In sharp contrast, the reaction with dicyclohexylborane proceeded smoothly to afford the cis-addition products preferentially, which were subjected to Suzuki-Miyaura cross-coupling reaction, leading to trisubstituted alkenes in high yields.     

On the gas-phase reactivity of complexed OH+ with halogenated alkanes

OH(+) is an extraordinarily strong oxidant. Complexed forms (L--OH(+)), such as H(2)OOH(+), H(3)NOH(+), or iron-porphyrin-OH(+) are the anticipated oxidants in many chemical reactions. While these molecules are typically not stable in solution, their isolation can be achieved in the gas phase. We report a systematic survey of the influence on L on the reactivity of L--OH(+) towards alkanes and halogenated alkanes, showing the tremendous influence of L on the reactivity of L--OH(+). With the help of with quantum chemical calculations, detailed mechanistic insights on these very general reactions are gained. The gas-phase pseudo-first-order reaction rates of H(2)OOH(+), H(3)NOH(+), and protonated 4-picoline-N-oxide towards isobutane and different halogenated alkanes C(n)H(2n+1)Cl (n=1-4), HCF(3), CF(4), and CF(2)Cl(2) have been determined by means of Fourier transform ion cyclotron resonance measurements. Reaction rates for H(2)OOH(+) are generally fast (7.2x10(-10)-3.0x10(-9) cm(3) mol(-1) s(-1)) and only in the cases HCF(3) and CF(4) no reactivity is observed. In contrast to this H(3)NOH(+) only reacts with tC(4)H(9)Cl (k(obs)=9.2x10(-10)), while 4-CH(3)-C(5)H(4)N-OH(+) is completely unreactive. While H(2)OOH(+) oxidizes alkanes by an initial hydride abstraction upon formation of a carbocation, it reacts with halogenated alkanes at the chlorine atom. Two mechanistic scenarios, namely oxidation at the halogen atom or proton transfer are found. Accurate proton affinities for HOOH, NH(2)OH, a series of alkanes C(n)H(2n+2) (n=1-4), and halogenated alkanes C(n)H(2n+1)Cl (n=1-4), HCF(3), CF(4), and CF(2)Cl(2), were calculated by using the G3 method and are in excellent agreement with experimental values, where available. The G3 enthalpies of reaction are also consistent with the observed products. The tendency for oxidation of alkanes by hydride abstraction is expressed in terms of G3 hydride affinities of the corresponding cationic products C(n)H(2n+1) (+) (n=1-4) and C(n)H(2n)Cl(+) (n=1-4). The hypersurface for the reaction of H(2)OOH(+) with CH(3)Cl and C(2)H(5)Cl was calculated at the B3 LYP, MP2, and G3(m*) level, underlining the three mechanistic scenarios in which the reaction is either induced by oxidation at the hydrogen or the halogen atom, or by proton transfer.     

Highly Selective Separation of Rhodopsin from Bovine Rod Outer Segment Membranes Using Combination of Divalent Cation and Alkyl(thio)glucoside

The micellization process of bovine rod outer segment (ROS) membranes is investigated utilizing a series of neutral detergents. It is found that when alkyl(thio)glucosides with an appropriate hydrophilic–lipophilic balance (e.g. octylthioglucoside) are used in combination with a divalent cation, rhodopsin is selectively extracted from ROS membranes at a specific detergent-to-membrane ratio. This allows remarkable purification of rhodopsin by a single-step solubilization, because the residual membranes are heavily aggregated in the presence of divalent cation and are therefore easily sedimented by low-speed centrifugation. The absorption spectrum of the supernatant reproducibly exhibits an A₂₈₀/A₅₀₀ value of 1.6, an excellent value that could rarely be obtained by chromatographic purification. The degree of purification also depends on the type of divalent cation included in the solubilization solution; specific binding of IIB-series cations (Zn²⁺ and Cd²⁺) to ROS membranes is suggested to play an important role in the solubilization process. The present result represents a unique example of selective solubilization of a specific membrane protein from highly aggregated membranes.     

Chemistry of the neopolyoxins,pyrimidine and imidazoline nucleoside peptide antibiotics

New chitin synthetase inhibitors, neopolyoxins A, B, and C were isolated from the culture filtrate of Streptomyces cacaoi subsp. asoensis. Their absolute structures have been established on the basis of chemical and spectroscopic evidence. They are structural analogs of the polyoxins. As a nucleobase, neopolyoxin C possesses uracil, while neopolyoxins A and B contain the imidazoline moiety. A ring contraction reaction of pyrimidine nucleoside into imidazoline nucleoside played a key role in the structure determination of the nucleoside moiety. A similar transformation was suggested for the biosynthesis of neopolyoxins A and B.