A Time-Dependent Nonequilibrium Calculational Scheme towards the Study of Temperature Fluctuations

A new perturbative scheme for interacting nonequilibrium thermal quantum fields using thermo field dynamics is outlined by explicitly considering the temporal change of the thermal vacuum as it moves through many inequivalent state vector spaces. One is then naturally led to two sources of time dependence, one from the dynamics and the other from the change of thermal vacuum, which are taken care of by the Hamiltonian and the thermal generator, respectively. To obtain a practical scheme we restrict ourselves by the demand that a spectral representation for the full propagator exists. This leads to a time dependent temperature. The addition of a diagonalization condition for the quasi-particle Hamiltonian provides the master equation for the number density. We show that our formalism is equivalent to an extended form of the path-ordering method. This formalism is a first step towards the study of the origin of heat and temperature in high-energy heavy ion collisions.     

Arene–perfluoroarene interactions confer enhanced mechanical properties to synthetic nanotubes

Supramolecular nanotubes prepared through macrocycle assembly offer unique properties that stem from their long-range order, structural predictability, and tunable microenvironments. However, assemblies that rely on weak non-covalent interactions often have limited aspect ratios and poor mechanical integrity, which diminish their utility. Here pentagonal imine-linked macrocycles are prepared by condensing a pyridine-containing diamine and either terephthalaldehyde or 2,3,5,6-tetrafluoroterephthalaldehyde. Atomic force microscopy and synchrotron in solvo X-ray diffraction demonstrate that protonation of the pyridine groups drives assembly into high-aspect ratio nanotube assemblies. A 1 : 1 mixture of each macrocycle yielded nanotubes with enhanced crystallinity upon protonation. UV-Vis and fluorescence spectroscopy indicate that nanotubes containing both arene and perfluoroarene subunits display spectroscopic signatures of arene–perfluoroarene interactions. Touch-spun polymeric fibers containing assembled nanotubes prepared from the perhydro- or perfluorinated macrocycles exhibited Young''s moduli of 1.09 and 0.49 GPa, respectively. Fibers containing nanotube assemblies reinforced by arene–perfluoroarene interactions yielded a 93% increase in the Young''s modulus over the perhydro derivative, up to 2.1 GPa. These findings demonstrate that tuning the chemical composition of the monomeric macrocycles can have profound effects on the mechanical strength of the resulting assemblies. More broadly, these results will inspire future studies into tuning orthogonal non-covalent interactions between macrocycles to yield nanotubes with emergent functions and technological potential.

Arene–perfluoroarene interactions resulted in enhanced crystallinity between analogous perhydro- and perfluoro macrocycles in a supramolecular nanotube assembly.     

Characterisation of Flavour Attributes in Egg White Protein Using HS-GC-IMS Combined with E-Nose and E-Tongue: Effect of High-Voltage Cold Plasma Treatment Time

Egg white protein (EWP) is susceptible to denaturation and coagulation when exposed to high temperatures, adversely affecting its flavour, thereby influencing consumers’ decisions. Here, we employ high-voltage cold plasma (HVCP) as a novel nonthermal technique to investigate its influence on the EWP’s flavour attributes using E-nose, E-tongue, and headspace gas-chromatography-ion-mobilisation spectrometry (HS-GC-IMS) due to their rapidness and high sensitivity in identifying flavour fingerprints in foods. The EWP was investigated at 0, 60, 120, 180, 240, and 300 s of HVCP treatment time. The results revealed that HVCP significantly influences the odour and taste attributes of the EWP across all treatments, with a more significant influence at 60 and 120 s of HVCP treatment. Principal component analyses of the E-nose and E-tongue clearly distinguish the odour and taste sensors’ responses. The HS-GC-IMS analysis identified 65 volatile compounds across the treatments. The volatile compounds’ concentrations increased as the HVCP treatment time was increased from 0 to 300 s. The significant compounds contributing to EWP characterisation include heptanal, ethylbenzene, ethanol, acetic acid, nonanal, heptacosane, 5-octadecanal, decanal, p-xylene, and octanal. Thus, this study shows that HVCP could be utilised to modify and improve the EWP flavour attributes.     

Carbon–chalcogen bond formation initiated by [Al(NONDipp)(E)]− anions containing Al–E{16} (E{16} = S,Se) multiple bonds

Multiply-bonded main group metal compounds are of interest as a new class of reactive species able to activate and functionalize a wide range of substrates. The aluminium sulfido compound K[Al(NON^Dipp)(S)] (NON^Dipp = [O(SiMe₂NDipp)₂]²⁻, Dipp = 2,6-ⁱPr₂C₆H₃), completing the series of [Al(NON^Dipp)(E)]⁻ anions containing Al–E{16} multiple bonds (E{16} = O, S, Se, Te), was accessed via desulfurisation of K[Al(NON^Dipp)(S₄)] using triphenylphosphane. The crystal structure showed a tetrameric aggregate joined by multiple K⋯S and K⋯π(arene) interactions that were disrupted by the addition of 2.2.2-cryptand to form the separated ion pair, [K(2.2.2-crypt)][Al(NON^Dipp)(S)]. Analysis of the anion using density functional theory (DFT) confirmed multiple-bond character in the Al–S group. The reaction of the sulfido and selenido anions K[Al(NON^Dipp)(E)] (E = S, Se) with CO₂ afforded K[Al(NON^Dipp)(κ²E,O-EC{O}O)] containing the thio- and seleno-carbonate groups respectively, consistent with a [2 + 2]-cycloaddition reaction and C–E bond formation. An analogous cycloaddition reaction took place with benzophenone affording compounds containing the diphenylsulfido- and diphenylselenido-methanolate ligands, [κ²E,O-EC{O}Ph₂]²⁻. In contrast, when K[Al(NON^Dipp)(E)] (E = S, Se) was reacted with benzaldehyde, two equivalents of substrate were incorporated into the product accompanied by formation of a second C–E bond and complete cleavage of the Al–E{16} bonds. The products contained the hitherto unknown κ²O,O-thio- and κ²O,O-seleno-bis(phenylmethanolate) ligands, which were exclusively isolated as the cis-stereoisomers. The mechanisms of these cycloaddition reactions were investigated using DFT methods.

Reaction of Al–E (E = S, Se) multiple bonds with C O functionalities generates new C–E bonds.     

Friction force microscopy of alkylphosphonic acid and carboxylic acids adsorbed on the native oxide of aluminum

Monolayers of alkylphosphonic acids (APA) and alkylcarboxylic acids (ACA) on magnetron-sputtered aluminum films have been investigated by friction force microscopy (FFM), contact angle measurement, and polarization-modulation infrared reflection-absorption spectroscopy (PM-IRRAS). Clear evidence has been provided from PM-IRRAS that friction coefficients, determined from FFM data, may be correlated directly with variations in adsorbate molecular structure. The friction coefficient increased with the length of the adsorbate molecule, but reached a limiting value when the alkyl chain of the adsorbate contained eight carbons in the case of APA or 12 carbons in the case of ACA. For a given alkyl chain length, APA monolayers yielded coefficients of friction that were similar to those of monolayers of alkylthiols of the same length, but smaller than those of ACA. These data indicate that APA monolayers are better ordered than ACA monolayers. These inferences were supported by PM-IRRAS data, which enabled the density of gauche defects to be estimated and correlated with variations in the coefficient of friction.     

Analysis of perfluorinated carboxylic acids in soils: detection and quantitation issues at low concentrations

Methods were developed for the extraction from soil, identification, confirmation and quantitation by LC/MS/MS of trace levels of perfluorooctanoic acid (PFOA), perfluorononanoic acid (PFNA) and perfluorodecanoic acid (PFDA). Whereas PFOA, PFNA and PFDA all can be quantitated using the method of standard additions, PFOA also can be quantitated less laboriously using 13C4-PFOA as a matrix internal standard. The impact of extract matrices on signal varied between soils and temporally during analytical runs rendering 13C4-PFOA unsuitable as a matrix internal standard for quantitating perfluorinated carboxylic acids (PFCAs) other than PFOA, which co-elutes with 13C4-PFOA. In fact, for soil extracts, quantitation of PFCAs based on external calibrations proved about as accurate as use of matrix internal standards for target analytes that do not co-elute with the matrix internal standard. Also, 13C4-PFOA should be used carefully as a matrix internal standard for trace levels of PFOA because some 13C4-PFOA standards contain trace impurities of unlabelled PFOA. When the presence of PFCAs in soil extracts is being determined by LC/MS/MS, detection limits are best defined by statistical methods that quantify the significance of contrast between analytical signal and background noise using multiple analyses. Further, when developing a calibration of low concentrations using weighted regression, the central tendency of the calibration line is best fitted using graphical depictions of error. As the MDL for the transition-product quantitation ion is approached in LC/MS/MS, relatively weak signals of transition-product confirmation ions can be used as a rejection criterion by looking for anomalously high values of the ratio of the confirmation to the quantitation ion.     

Stabilization of Catalytically Active Cu+ Surface Sites on Titanium–Copper Mixed‐Oxide Films

The oxidation of CO is the archetypal heterogeneous catalytic reaction and plays a central role in the advancement of fundamental studies, the control of automobile emissions, and industrial oxidation reactions. Copper‐based catalysts were the first catalysts that were reported to enable the oxidation of CO at room temperature, but a lack of stability at the elevated reaction temperatures that are used in automobile catalytic converters, in particular the loss of the most reactive Cu⁺ cations, leads to their deactivation. Using a combined experimental and theoretical approach, it is shown how the incorporation of titanium cations in a Cu₂O film leads to the formation of a stable mixed‐metal oxide with a Cu⁺ terminated surface that is highly active for CO oxidation.     

超分子结构水杨酸根插层水滑石的组装及结构与性能研究

以锌铝水滑石ZnAl-CO3 LDHs为前体（主体），以乙二醇为分散介质，用离子 交换法组装了水杨酸根（客体）插层水滑石ZnAl-[o-HO(C6H4)COO]LDHs，并用XRD ，FT-IR，TG-DTA等手段对样品进行了表征。结果表明，能过控制离子交换条件， 水杨酸根阴离子可取代锌铝水滑石前体层间的CO3^2-离子，组装得到晶体结构良好 的水杨酸根插层水滑石。通过研究发现，主体水滑石层板与客体以静电力和氢键相 互作用，得到的超分子结构材料紫外阻隔作用增强并具有较好的稳定性，从而成为 一种集屏蔽和吸收双重功能的新型无机-有机得合紫外阻隔材料。     

Divergent and Overlapping Roles for Selected Phytochemicals in the Regulation of Pathological Cardiac Hypertrophy

Plant-based foods, like fruits, vegetables, whole grains, legumes, nuts, seeds and other foodstuffs, have been deemed as heart healthy. The chemicals within these plant-based foods, i.e., phytochemicals, are credited with protecting the heart. However, the mechanistic actions of phytochemicals, which prevent clinical endpoints, such as pathological cardiac hypertrophy, are still being elucidated. We sought to characterize the overlapping and divergent mechanisms by which 18 selected phytochemicals prevent phenylephrine- and phorbol 12-myristate 13-acetate-mediated cardiomyocyte enlargement. Of the tested 18 compounds, six attenuated PE- and PMA-mediated enlargement of neonatal rat ventricular myocytes. Cell viability assays showed that apigenin, baicalein, berberine hydrochloride, emodin, luteolin and quercetin dihydrate did not reduce cell size through cytotoxicity. Four of the six phytochemicals, apigenin, baicalein, berberine hydrochloride and emodin, robustly inhibited stress-induced hypertrophy and were analyzed further against intracellular signaling and genome-wide changes in mRNA expression. The four phytochemicals differentially regulated mitogen-activated protein kinases and protein kinase D. RNA-sequencing further showed divergence in gene regulation, while pathway analysis demonstrated overlap in the regulation of inflammatory pathways. Combined, this study provided a comprehensive analysis of cardioprotective phytochemicals. These data highlight two defining observations: (1) that these compounds predominantly target divergent gene pathways within cardiac myocytes and (2) that regulation of overlapping signaling and gene pathways may be of particular importance for the anti-hypertrophic actions of these phytochemicals. Despite these new findings, future works investigating rodent models of heart failure are still needed to understand the roles for these compounds in the heart.     

Boron Subphthalocyanines and Silicon Phthalocyanines for Use as Active Materials in Organic Photovoltaics

Organic photovoltaics (OPVs) have experienced continued interest over the last 25 years as a viable technology for the generation of power. Phthalocyanines are among the oldest commercial dyes and have been utilized in some of the earliest examples of OPVs. In recent years, the use of boron subphthalocyanines (BsubPcs) and silicon phthalocyanines (SiPcs) has attracted a flurry of interest with some examples of fullerene‐free devices reaching power conversion efficiencies >8 %. Unlike other more common divalent phthalocyanines such as copper or zinc, BsubPcs and SiPcs contain additional axial groups that can easily be functionalized without significantly affecting the optoelectronic properties of the macrocycle. This handle facilitates our ability to tune the solid‐state arrangement and other physical characteristics such as solubility ultimately giving us the ability to improve the thin film processing and final device performance. This review covers recent studies on the development of BsubPcs and SiPcs for use as active materials in organic photovoltaics.