Determination of boron in boron-alloyed steels by inductively coupled plasma atomic emission spectrometry

An inductively coupled plasma atomic emission spectrometry (ICP-AES) procedure has been developed and examined for the determination of boron content (0.01 up to about 2% B) in boron-alloyed steels such as POLDI ATA BOR (65% Fe, 19%Cr, 12% Ni, 1.5% Mn, 1% B), POLDI ATA BOR EXTRA (62% Fe, 18% Cr, 13% Ni, 2.5% Mo, 1.5% Mn, 1% B) and POLDI ATA BOR-R (75% Fe, 18% Cr, 3.5% Ti, 1.8% B). The steel sample is dissolved with a mixture of hydrochloric, nitric, sulfuric and phosphoric acids in a quartz vessel. Borides of alloyed metals, especially of iron and chromium, are quantitatively decomposed. The presence of phosphoric acid in a sample solution reduces the volatility of boric acid with water vapour.Presented in part at the 1989 European Winter Conference on Plasma Spectrochemistry, Reutte, Austria     

Pulse plating effect on microstructure and corrosion properties of Zn–Ni alloy coatings

The influence of pulse plating parameters on the surface morphology, grain size, lattice imperfection and corrosion properties of Zn–Ni alloy has been studied. The coatings were electrodeposited in an alkaline cyanide-free solution. AFM was applied for surface morphology examination, XRD measurements were carried out for phase composition and texture analysis, electron probe microanalysis was used for alloy chemical composition studies, while electrochemical techniques were applied for corrosion performance evaluation. The pulse plated Zn–Ni coatings appeared to consist of the γ-Zn₂₁Ni₅ phase and the composition of the alloy depended on the plating parameters. The grain size, lattice imperfection and homogeneity of grain distribution were established to be the main factors determining corrosion behaviour of the coating. Presented at the 4th Baltic Conference on Electrochemistry, Greifswald, March 13–16, 2005     

The first decade of flow injection analysis: from serial assay to diagnostic tool

Some 804 papers on flow injection analysis published to the end of May 1985 are summarized. Past trends are discussed and new developments are briefly outlined.The paper entitled “Flow Injection Analysis. Part 1. A New Concept of Fast Continuous Flow Analysis” [1], which appeared in August 1975, was the first of some 804 papers [1/2-804] published on flow injection analysis (f.i.a.) during the past ten years. In the present contribution, all these papers are collected to record the status quo of the general method and to reveal the present trends in applications of f.i.a. and in the geographical distribution of the research activities. Important concepts and technological innovations are reviewed and the future development of f.i.a. is briefly outlined.     

Conformational structure of N-methylpropionamide and N-methylisobutyroamede. NMR shift reagent and IR study

The structures of the stable conformers of N-methyjpropionamide and N-methyliso-butyroamide in CCl₄, solution were determined by a combination of IR spectroscopy and NMR spectroscopy with lanthanide shift reagents. N-methyl-propionamide was found to exist in the form of two rotational isomers, 1 and 2, with the ethyl group twisted out of the plane of the amide bond by the angles Ψ = 140 and 20°, respectively. For these two conformers, the enthalpy difference is ΔH = 2.13 ± 0.08 kcal mole^?1 and the entropy difference ΔS = 7.81 ± 0.55 cal mole^?1 grad^?1. N-methylisobutyroamide exists in a single form, with the two C-methyl group positions very close to those found in the two isomers of N-methylpropionamide.     

Swelling and dissolution of latex dispersions of the ethyl acrylate-methacrylic acid copolymers during alkalization

By using non-Newtonian viscometry and the static light-scattering method, changes in the structure of particles of latex dispersions of ethyl acrylate-methacrylic acid copolymer during alkalization with ammonium hydroxide were investigated. It was found that in dispersions with an acid content up to 20 wt% the particles only swell; at acid content between 20 and 40 wt% they decompose to smaller units represented by supermolecular aggregates of macromolecules, and only when approximately starting from 40 wt% of acid does the copolymer become molecularly dissolved. This means that even if dispersions with an acid content from c. 20 wt% are clarified by alkalization, no complete dissolution takes place.     

Electron attachment and vibrational excitation in hydrogen iodide: calculations based on the nonlocal resonance model

High resolution laser spectroscopy has been applied to study the hyperfine structure of excited energy levels of Thulium I. As part of our aim to complete the fine and hyperfine structure of the Tm I spectra 51 transitions in the visible were measured and precise values for the magnetic dipole hyperfine structure constants A of 24 odd and 19 even levels were determined. In addition, a new energy level of even parity with J = 3/2 is found at 27 509.40 (5)cm^?1 using laser induced fluorescence spectroscopy.     

Micellar enhanced ultrafiltration of cadmium

The preconcentration of cadmium from aqueous colloid solution containing 8-hydroxyquinoline as extractant, laurylsulphate natrium as surfactant,n-butanol as co-surfactant was performed using micellar ultrafiltration technique. Filters with different pore size and materials were used to achieve a separation from liquid solutions. The cadmium recoveries depending on different conditions (pH, concentration of surfactant) were determined and the results are explained in the terms of colloidal parameters in the compare with the classical solvent extraction.     

Polymerization of styrene started by free radicals,generated by external force action-chemical potential gradient of the swelling agent — on the PVC/solvent optical phase boundary

Summary There were studied the process of styrene polymerization in PVC swollen surface layer initiated by free radicals generated under the action of chemical potential gradient as an external force. It was found that conversion of styrene into the block copolymer is an diffusion controlled process.

---

Zusammenfassung Die Initiation des Prozesses der Polymerization von Styrol in den Oberflächenquellungsschichten von PVC wurde untersucht.Dabei wurde festgestellt, daß die freien Radikale, welche bei Zerreißung von spannungsbeanspruchten Bindungen, wie sie durch Einfluß von äußeren Kräften auf den Gradienten des chemischen Potentials des Quellungsmittels an Oberflächenquell bildungsmittel Polymer entstehen können, Polymerizationsprozesse des olefinischen Quellungsmittels initiieren können.

---

---

Dedicated to ProfessorV. Kellö in celebration of his 60th birthday.     

Ascorbate oxidase

Ascorbate oxidase fromCucurbita sp. was isolated by ammonium sulfate precipitation and DEAE-dextran-silochrome column chromatography. The thermal and pH stabilities of the purified enzyme were investigated. TheK _M forl-ascorbic acid (1.5 mM) and chlorohydroquinone (0.37 mM) was determined. Substrate specificity of ascorbate oxidase was investigated and compared with those of laccases fromCoriolus hirsutus andCerrena maxima. Ascorbate oxidase was covalently bound to a polymeric membrane and used in an enzyme electrode for ascorbic acid.     

Estimation scheme for level-dependent uncertainty of analytical result: application for determination of 1-hydroxypyrene in urine

The estimation scheme of uncertainty of determination of 1-hydroxypyrene (1-OHP) in urine was developed analysing the main stages of the analytical procedure: (1) preparation of 1-OHP standards, (2) creation of the calibration curve for the high performance liquid chromatography (HPLC) analysis method with the evaluation of recovery, (3) measuring procedure of aliquot of urine, (4) adjusting the pH of aliquot and hydrolysis with enzyme, (5) solid phase extraction, (6) concentration of the extract, (7) injection of the extract to chromatograph and analysing by the HPLC method, (8) calculation of 1-OHP mass from the calibration curve, (9) calculation of 1-OHP concentration in urine. The evaluation of the uncertainty is based on quantification of individual components. Combined uncertainty was calculated using the law of propagation of uncertainties according to the EURACHEM/CITAC guidelines. Level dependence of the uncertainty arises from the calibration curve. The limits of detection and quantification were found to be equal to 0.03 and 0.1 ng/mL, respectively. The calculated expanded level-dependent uncertainty covers 47–27–25% within the concentration range 0.03–0.1–0.4 ng/mL with the materials and equipment used. These parameters could easily be recalculated according to the proposed scheme if there are some changes in the analysis procedure.