Almost Hermitian structures induced from a Kähler structure which has constant holomorphic sectional curvature

We obtain a non-Kähler almost Hermitian manifold of constant holomorphic sectional curvature by changing the almost complex structure in a Kähler manifold of constant holomorphic sectional curvature.

     

Optical probe using eccentric optics for optical coherence tomography

We propose and demonstrate an OCT optical probe using eccentric optics. This probe enabled both forward imaging and side imaging by dividing a circular scanning area into two semicircular scanning areas using an external motor to rotate the flexible tube. The outer diameter of the probe was 2.6 mm, and its rigid portion length was 10 mm. The lateral resolution was 23 μm, and the eccentric radius was 1.1 mm. The circumferential length in scanning was 6.9 mm, and the working distance was 5 mm. OCT images of 1.5 mm × 6.9 mm (in tissue, axial × circumference), including forward image and side image, were measured with the axial resolution of 19 μm in air and a frame rate of one frame per second. The epidermis, dermis, and sweat gland of in vivo human ventral finger tips were observed.     

Raman probe using a single hollow waveguide

A simple Raman probe was realized using a single flexible hollow waveguide (HW). A HW coated with a silver film, which had reasonable transmission and little optical background noise, was used as a bidirectional transmission fiber for both the excitation and collection of Raman scattered light. The HW itself generated no Raman scattering or fluorescence noise during transmission. A complex filtering system at the end of the waveguide was thus unnecessary. In addition, the measured Raman spectra showed better signal-to-noise ratios than a conventional Raman fiber probe. The HW's suitability as a Raman fiber probe was also demonstrated.     

Modulation-free acetylene-stabilized lasers at 1542 nm using modulation transfer spectroscopy

We report frequency stabilization of diode lasers using modulation transfer spectroscopy of an acetylene transition (¹³C₂H₂, ₁+₃, P(16)) at 1542 nm. We realize modulation-free acetylene-stabilized lasers with a frequency stability of about 10^–11 and an absolute frequency accuracy of about 20 kHz.This revised version was published online in March 2005. In the previous version, the published online date was missing     

FEM study of NOW and NO2W adsorption system

Nitric oxide adsorption on tungsten and nitric dioxide adsorption on tungsten have been investigated by the FEM method. When NO or NO₂ adsorbs gradually on W at 300 K and at 80 K, the FEM patterns which appear at first are found to be similar to those which appear in N₂ adsorption on W. In the case of NO adsorption on W at 80 K, with further exposure, no further change of the FEM patterns is observed. However, in the cases of NO adsorption on W at 300 K, NO₂ adsorption on W at 300 K, and NO₂ adsorption on W at 80 K, further changes of the FEM patterns are observed with further exposure, and the FEM pattern which is obtained at the saturated state is found to be similar to the FEM pattern which appears at the saturated state of O₂ adsorption on W. From the above results it is suggested that NO and NO₂ dissociate on W at 300 and at 80 K.     

In-situ X-ray diffraction study on β-CrOOH at high pressure and high-temperature

ABSTRACT

High pressure hydrous phases with distorted rutile-type structure have attracted much interest as potential water reservoirs in the Earth’s mantle. An in-situ X-ray diffraction study of β-CrOOH was performed at high pressures of up to 6.2?GPa and high-temperatures of up to 700?K in order to clarify the temperature effect on compression behaviors of β-CrOOH. The P-V-T data fitted to a Birch–Murnaghan equation of state yielded the following results: isothermal bulk modulus K_T0?=?191(4)?GPa, temperature derivative (?K_T/?T)_P?=??0.04(2)?GPa?K^?1, and volumetric thermal expansion coefficient α?=?3.3(2)?×?10^?5?K^?1. In this study, at 300?K, the a-axis became less compressible at pressures above 1–2?GPa. We found that the pressure where the slopes of a/b and a/c ratios turned positive increased with temperature. This is the first experimental study indicating the temperature dependence of the change in the axial compressibility in distorted rutile-type M³⁺OOH.     

Continuous flame oxidation in supercritical water

Abstract

Continuous flames have been observed in Supercritical water oxidation (scWO) of isopropyl alcohol (IPA), using a vertical continuous reactor with sapphire windows and a mixing nozzle. Two types of continuous flame were confirmed: the one was long pale blue colored and the other was red short cone shaped, changing blue to red at around air ratio 2.0. The flame was strongly influenced by IPA concentration, air ratio and design of the mixing nozzle. Results for decomposition of PA are presented for IPA concentrations ranging from 600 up to 28260 ppm as TOC and initial reactor temperatures, were mostly around 490°C, at 25 MPa. Decomposition rate at steady state was over 99.9%. Experimentally measured CO₂ and O₂ concentrations at the flue gas were in good agreement with theoretically calculated values. Even for low air ratio as 1.1, high decomposition rate without CO, NO, NO₂ was achieved.     

Diamond-like carbon films prepared by pulsed-laser evaporation

Diamond-like carbon thin films were prepared by pulsed-laser evaporation. In this method a carbon target was irradiated by a XeCl laser with a power density of 3×10⁸ W/cm² and carbon atoms, together with a small number of ions, were produced. Deposition rates and film properties changed sensitively with substrate temperature. The films deposited at 50°C were diamond-like, having reasonable hardness, high refractive index (2.1–2.2 at 633 nm), optical transparency in the infrared, electrical resistivity of 10⁸ cm and chemical inertness (no dissolution in a HFHNO₃ solution). The band gap measured from optical absorption was 1.4 eV. Raman spectrum and infrared absorption, whose features varied with the substrate temperature, were also measured. The films were amorphous and no crystallinity was observed, as confirmed by x-ray diffraction, transmission electron diffraction and Raman spectroscopy. Hydrogen atoms were incorporated in the films with a typical H/C ratio of 0.3. The application of a negative bias to the substrate modified the deposition due to the presence of ions.