Crystal structures and Mössbauer spectroscopic studies of oxo-centered trinuclear chloroacetate complexes

The crystal structures of oxo-centered trineclear cobalt-iron chloroacetate complex [Co^IIFe ₂ ^III O(CH₂ClCO₂)₆(H₂O)₃]·3H₂O (1) was compared with that of previously reported trinuclear iron complex [Fe^IIFe ₂ ^III O(CH₂ClCO₂)₆(H₂O)₃]·3H₂O (2) which has an isomorphous structure to 1. Compound 1 crystallizes in space group P2₁/n with Z=4 in a unit cell of a=14.826 (4) Å, b=4.536 (8) Å, c=14.000 (4) Å, =100.32 (2)⁰ and V=2968 (11) ų. The structure was refined to R=0.75 and R_w=0.82. The coordination geometries of the three iron atoms are observed equivalent in 1 indicating a static disorder of the position among cobalt and iron atoms. Two distinct Fe^III doublets observed in Mössbauer spectra of 1 become an indistinguishable broad doublet by dehydration of crystal water. On the other hand, no significant line-broadening is observed after the dehydration in complex 2. The results indicate that the dehydration in 2 induces a local environmental change reordering of an electronic configuration around iron atoms, whereas the remaining disordering is reflected in Mössbauer spectrum after the dehydration in 1.     

The economical parameter survey program for long-term transient temperature distribution and stress analysis around the sodium level of the liquid metal fast breeder reactor

The thermal stress around the sodium level of the LMFBR reactor vessel, caused by the axial temperature distribution during heat-up and cool-down transient conditions, is one of the most important problems for a reactor vessel designer, especially in a conceptual design stage. Key parameters relating to plant operating transient conditions and reactor vessel main configuration should be settled carefully, thermal stresses not being allowed to exceed design stress limits. In order to examine the sodium level thermal stress easily and economically, a simple computer program for parameter survey has been developed. This program uses a one-dimensional Fourier series solution in transient temperature distribution analysis, and an analytical stress solution based on shell theory in stress value estimation. This paper presents a simplified and economical calculation method for the axial temperature distribution and stress value in the LMFBR operating transient conditions, and analysis examples obtained with this computer program.

---

Zusammenfassung Der durch die axiale Temperaturverteilung während der Übergangsphase von Aufheizen und Abkühlen verursachte thermische Streß rund um den Natriumfüllstand des LMFBR-Reaktorkessels ist für den Reaktorkesselkonstrukteur, besonders im Entwurfstadiuni eines der wichtigsten Probleme. Die mit den transienten Operationsbedingungen der Anlage und der Gestaltung des Reaktorkessels in Beziehung stehenden Grundparameter müssen sorgfältig ermittelt werden, um zu verhindern, daß der thermische Streß die geplanten Streßgrenzen nicht überschreitet. Um den thermischen Streß um den Natriumfüllstand, leicht und ökonomisch zu bestimmen, wurde ein Komputerprogramm für die Parameterübersicht aufgestellt. In diesem Programm wird von einer eindimensionalen Fourrierreihe zur Analyse der transienten Temperaturverteilung und einer auf der Schalentheorie von Streßwertbestimmungen basierende analytische Lösung Gebrauch gemacht. Im vorliegenden Artikel werden eine vereinfachte und wirtschaftliche Berechnungsmethode für die axiale Temperaturverteilung und Streßwerte bei transienten Arbeitsbedingungen mitgeteilt und mit diesem Komputerprogramm ausgeführte Analysenbeispiele angegeben.

---

, - () , , , . , , , . , , - , . , , .

---

---

Paper presented at the World Conference on Thermal Analysis, Madeira (Portugal) 1986.     

Simultaneous assay of four stereoisomers of diltiazem hydrochloride. Application to in vitro chiral inversion studies

Summary The simultaneous stereospecific assay of four stereoisomers of diltiazem hydrochloride in bulk drug and aqueous solution was developed using HPLC on a Chiralcel OF column. The four isomers were quantitated with good precision by the internal standard method. The chiral inversion of (+)-cis-diltiazem hydrochloride in vitro, stability of its (2S, 3S) configuration in the solid and aqueous states was examined by HPLC. Chiral inversion of (+)-cis-diltiazem hydrochloride was not observed in the solid state, and its (2S, 3S) configuration was stable to heat, humidity and light. Chiral inversion of (+)-cis-diltiazem hydrochloride (2S, 3S) was observed in aqueous solution under UV, but not in aqueous solution stored at 80°C for 5h nor under visible light for 10 h. The (+)-cis-diltiazem hydrochloride (2S, 3S) epimerized to (+)-trans-diltiazem hydrochloride (2R, 3S) with a half-life of 5h in aqueous solution under UV but the reverse chiral inversion of (+)-trans-diltiazem hydrochloride (2R, 3S) to (+)-cis-diltiazem hydrochloride (2S, 3S) was not observed.     

Basic evaluation of highly sensitive thyroid stimulating hormone immunoradiometric assay kits

Usefulness of three kinds of TSH kits by immunoradiometric assay (IRMA) was evaluated. They were able to measure low levels (less than 0.1 microIU/ml) in serum thyroid stimulating hormone (TSH) with incubation of short time (4 hours). In particular, RIABEAD II kit had a highly specific affinity for TSH and the normal range (+/- 2 S.D.) using it showed from 0.20 to 3.50 microIU/ml in 150 normal subjects. In patients with hyperthyroidism and in patients with hypothyroidism, the values of TSH were lower and higher than those of normal subjects, respectively. Another kits showed similar results. These results indicate that these TSH-IRMA kits are useful to evaluate serum TSH levels exactly.     

Preparation of phosphorus-containing polymers—XVI. Synthesis of phosphorus-containing polyanhydride-imides

Phosphorus-containing polyanhydride-imides were synthesized from N,N-bis(4-carboxyphthalimido)-3,3′-diphenylalkylphosphine oxide, 3,3′-[N,N′-bis(4-carboxyphthalimido)]benzophenone and their mixtures in two steps via the diacetyl derivatives of the bisimide-carboxylic acids. The resulting polymers have reduced viscosities of 0.06–0.14 dl/g and are soluble in polar aprotic solvents such as DMA, DMF and DMSO, and conc. H₂SO₄ etc. They have good hydrolytic stability for moisture and water. Phosphorus-containing polymers have little heat-resistance and poor flame-retardance. The benefit of incorporating phosphorus in the polymers is small.     

13C nuclear magnetic resonance studies of cellulose acetate

¹³C-NMR spectra of ring carbons and O-acetyl carbonyl carbons of cellulose acetate (CA) in dimethyl sulfoxide-d₆ were analyzed. The CA samples with the degree of substitution (DS) ranging from 0.84 and 1.91 were prepared by homogeneous acetylation of cellulose with acetic anhydride in a 10% LiCl/dimethyl acetamide solvent. It was found that the use of these low DS samples permitted easier assignments not only of the ring carbon but also of the O-acetyl carbonyl carbon signals. The assignments were confirmed by comparing with the ¹H-NMR spectra of the samples obtained by complete acetylation of the corresponding CA samples with acetyl-d₃ chloride. Two methods for determining the distribution of O-acetyl groups of CA, i.e., the relative DS at the three different types of hydroxyl groups, were developed. One is based on the measurements of the relative intensities of the signals for the ring carbons and the other is based on the measurements of the relative intensities of the signals for the O-acetyl carbonyl carbons.     

Medium-sized cyclophanes—XVII : Tetra-, hexa-, octa- and decahydropyrenes from [2.2]metacyclophane. Transannular dehydrogenation,isomerization, and disproportionation reactions by means of benzoyl peroxide,metal salts and sulfuric acids

[2.2]Metacyclophane (1) undergoes a variety of reactions according to the reagents and conditions. These include (1) substitution (path a), (2) transannular dehydrogenation (path b and c), (3) cycloisomerization (path d) and (4) transannular hydrogenation. A brief summary of these reactions is presented.The diversity of the reactions of 1 is further explored using benzoyl peroxide (BPO), cupric chloride, aluminum chloride, other metal salts, H₂SO₄ and FSO₃H. With BPO or cupric chloride, one-electron transfer mechanism is postulated. This involves a tautomeric ion pair formed by the intramolecular arylation with an aryl cation radical. A supporting evidence in favor of the mechanism is presented from experiments using various metal salts in different solvents.On the contrary, the reaction with aluminum chloride gives decahydropyrene (8) and octahydropyrene (11) together with cycloisomerization product 5 and dehydrogenation products 2, 3 and 4. When treated with AlCl₃HCl 1 gives similar products as above but the product ratios are quite different. The major product is 5 but only a trace amount of 8 is formed. The reaction with H₂SO₄ or FSO₃H also produce 2, 4, 5 and 11. Some mechanistic evidence in favor of the disproportionation reaction is presented.     

Dipole moments of (styrene-p-chlorostyrene) triblock copolymers in solutions

(Styrene-p-chlorostyrene) triblock copolymers of the ABA and BAB types (A—polystyrene; B—poly-p-chlorostyrene) were prepared by anionic polymerization and their conformational behaviours in solutions were studied from measurements of the dipole moments. Two solvents, toluene and cumene, were used for the study; toluene is a good solvent for both polystyrene and poly-p-chlorostyrene whereas cumene is a selective solvent, good for polystyrene but poor for poly-p-chlorostyrene. It was found that the dipole moments of the block copolymers measured in toluene are the same for the ABA and BAB copolymers; in cumene however the dipole moment of the BAB copolymer is smaller than that of the ABA copolymer. The results give an additional support to our previous conclusion that the conformation of the block copolymers in a good solvent such as toluene could be approximated with a pseudo-random coil form; in a selective solvent, however, some anomalies take place in the conformation of the block copolymers, as deduced from intrinsic viscosity, osmotic pressure and light scattering measurements.     

Synthesis of aromatic polyamides by 1-hydroxybenzotriazole-catalyzed polycondensation of active aromatic diesters with aromatic diamines

Catalytic actions of various additives were studied in the polycondensation of di(4-nitrophenyl) isophthalate with bis(4-aminophenyl) ether in N-methyl-2-pyrrolidone, and 1-hydroxybenzotriazole (HOBt) was found to be a highly effective catalyst that yielded high-molecular-weight polyamide. In addition to the polycondensation of the 4-nitrophenyl ester, the polymerization of negatively substituted phenyl esters like di(2,4,5-trichlorophenyl) isophthalate was also accelerated by HOBt. For the HOBt-catalyzed aminolysis of esters a bifunctional concerted mechanism that involves an eight-membered transition state was proposed.