Simulation of electron bunch generation by an ultrashort-pulse high-intensity laser-driven wakefield

Electron acceleration due to a wakefield excited by a ultrashort-pulse intense laser propagating through a finite-length underdense plasma layer is studied by two-dimensional particle-in-cell simulation. The electron energy distribution is analyzed for moderate to high intensity. For the electron density, where the pulse length is almost half of the plasma wavelength, dramatic changes of the density structure occur with cavity and bunch formation with an increase in the laser intensity, also leading to the appearance of a fast electron component well confined in phase space. The analytical form of the fast electron energy spectrum is also presented.     

Controlling the generation of high frequency electromagnetic pulses with relativistic flying mirrors using an inhomogeneous plasma

A method for the controlled generation of intense high frequency electromagnetic fields by a breaking Langmuir wave (relativistic flying mirrors) in a gradually inhomogeneous plasma is proposed. The wave breaking threshold depends on the local plasma density gradient. Compression, chirping and frequency multiplication of an electromagnetic wave reflected from relativistic mirrors is demonstrated using Particle-In-Cell simulations. Adjusting the shape of the density profile enables control of the reflected light properties.     

Laser ablation synthesis of monodispersed magnetic alloy nanoparticles

Monodispersed CoPt alloy nanoparticles were synthesized by a pulsed laser ablation (PLA) technique coupled with a low-pressure operating differential mobility analyzer (LP-DMA). The CoPt alloy nanoparticles were generated by laser ablating a solid Co–Pt target. In CoPt alloy nanoparticles synthesized from a target with a Co composition of 75 at%, the nanoparticle surfaces were covered by an oxide layer and exhibited a core-shell structure. In contrast, no shell was observed in particles generated from a target with a Co:Pt ratio of 50:50 at%. According to an EDX analysis, the compositions of the individual nanoparticles were almost the same as that of the target material. Finally, the magnetic hysteresis loops of the CoPt alloy nanoparticles exhibited ferromagnetism.     

Laser-ionization mass-spectrometric studies on laser ablation of a nitrogen-rich polymer at 532 nm and 1064 nm

Laser-ionization Time-Of-Flight (TOF) mass-spectrometric studies have been carried out on the 532 nm and 1064 nm laser ablation products from a nitrogen-rich polymer. The polymer used had an elemental composition of C_6.0N_8.9H_3.4 and consisted of C=N, C-N, and N-H chemical bonds. The TOF mass spectra observed were composed of various peaks (150 amu) depending on the ablation laser wavelength. The primary peaks were assigned to C⁺, CN⁺, CHnN⁺ ₂ (n=1–3) and C₂H₂N⁺ ₃ for 532 nm ablation, and C⁺, C⁺ ₃, HCN⁺, HCCN⁺, CH₂NH⁺, HNCN⁺, H₃NCN⁺, and C₄H₄N⁺ ₇ for 1064 nm ablation. The flight velocity distributions with peak velocities ranging from 8.6×10³ cm/s to 3.8×10⁴ cm/s were measured for these products. The distinct velocity distributions observed between small and large products indicate the presence of two origins in the fragment ejection process from the polymer for both 532 nm and 1064 nm ablation. Furthermore, we suggest an importance of the translational energy of the fragments for the product generation in the laser plume.     

Design of highly nonlinear dispersion flattened hexagonal photonic crystal fibers for dental optical coherence tomography applications

In this paper, we propose a highly nonlinear dispersion flattened hexagonal photonic crystal fiber (HNDF-HPCF) with nonlinear coefficients as large as 57.5W⁻¹ km⁻¹ at 1.31 μm wavelength for dental optical coherence tomography (OCT) applications. This HNDF-HPCF offers not only large nonlinear coefficient but also very flat dispersion slope and very low confinement losses. Using these characteristics of our proposed PCF, it is shown through simulations by using finite difference method with an anisotropic perfectly matched boundary layer that this PCF offers the efficient supercontinuum (SC) generation for dental OCT applications at 1.31 μm wavelength using a picosecond pulse easily produced by commercially available less expensive laser sources. Coherent length of light source using SC is found 10 μm and the spatial resolutions in the depth direction for dental applications of OCT are found about 6.1 μm for enamel and 6.5 μm for dentin.     

Experimental observation of soft X-rays and suprathermal ions from rare-gas cryogenic solid targets

We investigated characteristics of the soft X-ray emission in the wavelength range of 6–16 nm using various rare-gas cryogenic solid targets irradiated with a nanosecond laser pulse. Suprathermal ions having a maximum velocity of the order of 10⁷ cm/s were detected for three rare-gas targets (Ar, Kr, and Xe). The spatial distributions of the soft X-rays and the suprathermal ions were measured for Xe cryogenic solid targets and found to vary as cos² and cos⁵, respectively, where is the angle to the target normal. By integrating the observed cos² spatial distribution, the conversion efficiency of the soft X-ray emission in the wavelength range from 6 to 16 nm was evaluated to be 0.2%/pulse. PACS 52.38.ph; 52.50.Jm     

Electron g-factor in a gated InAs-inserted-channel In0.53Ga0.47As/In0.52Al0.48As heterostructure

We report on electron g-factor in an InAs-inserted In_0.53Ga_0.47As/In_0.52Al_0.48As heterostructure. The gate voltage dependence of g-factor is obtained from the coincidence method. The obtained g-factor values are surprisingly smaller than the g-factor value of bulk InAs, and it is close to the bare g-factor value of In_0.53Ga_0.47As. The large change in g-factor is observed by applying the gate voltage. The obtained gate voltage dependence is not simply explained by the energy dependence of g-factor.     

Demonstration of laser-frequency upshift by electron-density modulations in a plasma wakefield

In a plasma wake wave generated by a high power laser, modulations of the electron density take the shape of paraboloidal dense shells, moving almost at the speed of light. A counterpropagating laser pulse is partially reflected from the shells, acting as relativistic flying mirrors, producing a time-compressed frequency-multiplied pulse due to the double Doppler effect. The counterpropagating laser pulse reflection from the plasma wake wave accompanied by its frequency multiplication (with a factor from 50 to 114) was detected in our experiment.     

Generation of light-induced electrical potential from ion exchange membranes containing 4,4′-bipyridine moiety. II. Effect of species of anion exchange membranes on photovoltage

Various anion exchange membranes containing the 4,4′-bipyridine moiety as anion exchange groups were prepared from membranous copolymers of chloromethylstyrene and divinylbenzene and membranes of chloromethylated polysulfone and 4,4′-bipyridine. After evaluating the electrochemical properties of the obtained anion exchange membranes, the effect of membrane species on the generation of a photovoltage was examined by irradiation using a xenon lamp. The membranes swelled with ethylene glycol were clamped between two ITO electrodes and sealed by adhesive. The generated photovoltage and photocurrent from about a 120 μm thick membrane were about 80 mV and 400 nA, respectively, in a 200K Ω load resistance, though dependent of membrane species. The voltage decreased with increasing crosslinking by the divinylbenzene in the copolymer membranes. The effect of counter ion species on the voltage was examined and a chloride ion form of membrane showed the highest photovoltage. The membranes with different thicknesses, which were prepared from polysulfone derivatives, were evaluated and the voltage decreased with decreasing thickness. Even a porous membrane from polysulfone derivatives showed a photovoltage though a porous membrane in which a methyl viologen ethylene glycol solution had been impregnated did not have a stable voltage. Also, the anion exchange membrane containing the benzyl trimethylammonium moiety, which is the conventional anion exchange groups, did not show a high and stable photovoltage upon photoirradiation. © 1996 John Wiley & Sons, Inc.     

Anion exchange membrane with viologen moiety as anion exchange groups and generation of photo-induced electrical potential from the membrane

An anion exchange membrane with a viologen moiety was prepared by the reaction of a film of chloromethylated polysulfone and 4,4′-bipyridine. The anion exchange membrane showed a high electrical resistance and a high transport number of anions due to the development of high crosslinking by the diamine. After the membrane had been swollen with ethylene glycol, photo-voltage and photo-current (82 mV, 410 nA at 200 kΩ load, 160 μm thick membrane) were generated from the membrane upon photo-irradiation.