Determination of meropenem by capillary electrophoresis using direct injection of serum

Concentration determination of meropenem, a carbapenem antibiotic, using a capillary electrophoresis method by direct injection of serum samples without any pretreatment is described herein. Sodium tetraborate (25 mM)-sodium hydroxide (0.1 M) containing sodium dodecyl sulfate (90 mM) is used as a run buffer (pH 10.0). Meropenem is detected at its absorption maximum at 297 nm. Migration time of meropenem is approximately 7.2 min, and the detection limit of the assay is 2.0 mg/L at a signal-to-noise ratio of 3.0. The relative standard deviations of intra- and interassay accuracies are 3.43-8.87% and 4.28-8.54%, respectively, at a nominal concentration of 6.3-100.0 mg/L, and their recovery rates are 94-111% and 92-105%, respectively.     

Guest shape-responsive fitting of porous coordination polymer with shrinkable framework

In situ synchrotron X-ray powder diffraction patterns of porous coordination polymers [[Cu(2)(pzdc)(2)(bpy)].G] have been measured (pzdc = pyrazine-2,3-dicarboxylate, bpy = 4,4'-bipyridine) (where G = H(2)O for CPL-2 superset H(2)()O, G = benzene for CPL-2 superset benzene, and G = void for the apohost). The structures of apohost and CPL-2 superset benzene were determined from Rietveld analysis. Adsorption of benzene in the channels induced a remarkable contraction in the crystal (b axis; 6.8%, volume; 4.9%), although the channels were occupied by the benzene molecules. This crystal transformation provides a new pore structure that is well suited for benzene molecules, and we denote it as a "shape-responsive fitting" transformation. This type of pore gives rise to a new guideline: frameworks can be composed of flexible motifs that are linked via strong bond and/or stiff motifs that are connected via weaker bonds.     

Thermal and photochemical rearrangements of 1,4-dithiin sulfoxides

Thermolysis of 2,5-diphenyl-1,4-dithiin-1-oxide afforded 2-formyl-2,4-diphenyl-1,3-dithiole, which was obtained also in photolysis along with another rearranged product, 2-benzoyl-4-phenyl-1,3-dithiole.     

DNA-bleomycin interaction: Nucleotide sequence-specific binding and cleavage of DNA by bleomycin

Biosynthetic intermediates and synthetic analogues of bleomycin (BLM) have been investigated for their metal binding, dioxygen activation, and DNA cleavage. Molecular O₂ was activated by the Fe(II) complex of a synthetic model ligand. Nucleotide sequence specificities in DNA cleavage by the BLM-Fe(II) and deglyco-BLM-Fe(II) complexes were almost identical. It has been shown that (1) the β-aminoalanine-pyrimidine-β-hydroxyhistidine portion of BLM is essential for the metal binding and dioxygen activation and (2) the bithiazole moiety contributes to the specific binding to guanine base of DNA.     

Polyiodide composition in poly(vinyl acetate)-iodine-iodide complex

Polyiodide formed by complexation of poly(vinyl acetate) (PVAc) with iodine in the presence of iodide has been investigated by chemical analysis and resonance Raman spectrophotometry. When PVAc films were immersed in iodide-iodine aqueous solutions which had different ratios of iodide to iodine concentration [I^?]/[I₂], the complex films exhibited tremendous variations of swelling degree, despite the relatively small change in the amount of bound iodine. From a quantitative chemical analysis, the composition of polyiodide bound to PVAc was found to be 1.01 ± 0.035 in the molar ratio of iodide to iodine irrespective of the composition of the iodide-iodine aqueous solution ([I^?]/[I₂] = 2–500). The polyiodide formed in PVAc-iodine-iodide complex was therefore inferred to be (I₃^?)_n. Resonance Raman spectra obtained on PVAc-iodine-iodide complexes were also identical to those of the benzamide-iodine complex, in which the polyiodide consists of (I₃^?)_n, consistent with the result from chemical analysis.     

Synthesis and two-electron redox behavior of diazuleno[2,1-a:1,2-c]naphthalenes

The Diels-Alder reaction of di-2-azulenylacetylene with tetraphenylcyclopentadienone afforded 7,8,9,10-tetraphenyldiazuleno[2,1-a:1,2-c]naphthalene in one pot via autoxidation of the presumed 1,2-di-2-azulenylbenzene derivative. In contrast, a similar reaction of bis(1-methoxycarbonyl-2-azulenyl)acetylene with tetraphenylcyclopentadienone gave the 1,2-di-2-azulenylbenzene derivative. The following cyclodehydrogenation reaction of the benzene derivative with iron(III) chloride afforded diazuleno[2,1-a:1,2-c]naphthalene 6,11-bismethoxycarbonyl derivative. The redox behavior of these novel diazuleno[2,1-a:1,2-c]naphthalenes was examined by cyclic voltammetry (CV). These compounds exhibited two-step oxidation waves at +0.22 to +0.71 V upon CV, which revealed the formation of a radical cation and dication stabilized by the fused two azulene rings under the electrochemical oxidation conditions. Since the 1,2-di-2-azulenylbenzene derivative was oxidized at higher oxidation potentials (+0.83 and +1.86 V), the fusion of the two azulene rings to naphthalene increased electron-donating properties because of the formation of a closed-shell dicationic structure. Formation of the radical cation was characterized by UV-vis spectroscopy under the electrochemical oxidation conditions, although no evidence was obtained for the presumed dication under the conditions of the UV-vis spectroscopy measurement.     

Analysis of oxidized epigallocatechin gallate by liquid chromatography/mass spectrometry

(-)-Epigallocatechin gallate (EGCG) of catechins changes from non-colored at around neutral pH to yellow at higher pH region in aqueous solution. The pH-dependent oxidation of EGCG was analyzed by liquid chromatography/electrospray ionization tandem mass spectrometry (LC/ESI-MS/MS). LC/MS/MS analysis of EGCG and its related compounds, (-)-epicatechin gallate (ECG) and (-)-epigallocatechin (EGC), successfully elucidated the structure relationship of EGCG solution involving the color change reaction at different pH conditions. The oxidation species produced at alkaline pH was detected at a different retention time from EGCG in the chromatograms of the EGCG sample. The oxidation species was found to correspond to M+14 (where M is the molecular weight of EGCG), which has two hydrogen atoms removed and addition of one oxygen atom to the gallyl moiety in the B-ring of EGCG.     

Furan ring oxidation strategy for the synthesis of macrosphelides A and B

By using the convenient protocol for conversion of 2-substituted furans into 4-oxo-2-alkenoic acids ((i) NBS, (ii) NaClO(2)), macrosphelide B (2) was synthesized from furyl alcohol 5 (>98% ee) and acid 6 (99% ee). The protocol was first applied to the PMB ether of 5 to afford acid 13b. On the other hand, DCC condensation of acid 6 with 5 gave 16 after deprotection of the TBS group. Condensation was again carried out between 13b and 16 to furnish the key ketone 17, which upon reduction with Zn(BH(4))(2) afforded anti alcohol 18 stereoselectively (15:1). After protection/deprotection steps, the furan 18 was converted to seco acid 3 by using the furan oxidation protocol mentioned above, and lactonization of 3 with Cl(3)C(6)H(2)COCl, Et(3)N, and DMAP afforded 22 (MOM ether of 2), which upon deprotection with TFA produced 2. Transformation of 22 to macrosphelide A (1) was then investigated. Although the chelation-controlled reduction of 22 should afford the desired anti alcohol 24, Zn(BH(4))(2) at <-90 degrees C gave a 2 approximately 1:1 mixture of anti/syn alcohols. On the contrary, reduction with NaBH(4) in MeOH at -15 degrees C produced the syn isomer 23 with >10:1 diastereoselectivity. Mitsunobu inversion of the resulting C(14)-hydroxyl group and deprotection of the MOM group with TFA afforded 1. Similarly, reduction of 2 with NaBH(4) afforded the C(14)-epimer of 1 stereoselectively. The observed stereoselectivity in the reductions of 22 and 2 could be explained on the basis of computer-assisted calculation, which showed presence of the low-energy conformers responsible for the stereoselective reduction. In addition, conversion of 2 to 1 was established, for the first time.     

Syntheses and electrical conductivity of polyamides containing tetrathiafulvalene moieties in the main chain

Novel polyamides that contain tetrathiafulvalene (TTF) moieties were synthesized by direct polycondensation of Δ^2,2′ -bi-1,3-dithiole-4,4′(5′)-dicarboxylic acid with aromatic diamines in the presence of triphenylphosphine, hexachloroethane, and pyridine. Complexes of these polyamides with bromine were TTF cation radical () salts which resulted from the charge transfer of TTF moieties to bromine. The electrical conductivity of undoped polyamides increased with a decrease in diamine length. By doping the bromine the conductivity of the polyamides was enhanced by 3–5 orders of magnitude and reached 10^?5–;10^?9S cm^?1. Maximum conductivity was observed at the doping ratio of [Br]/[repeat unit] < 1. The electrical conduction in the bromine complexes may be attributed to the hopping of odd electrons of between TTF moieties.