螺环倍半萜(±)-α-花柏烯-3-酮的全合成

通过萜品油烯 ( Terpinolene)与 2 ,4-二氧代戊酸甲酯的 de Mayo反应得到 [2 +2 ]光加成产物 ,经反aldol重排 ,再环合成具有螺 [5 ,5 ]十一烷结构的花柏烯基本碳架 ,进而对其官能团进行化学修饰 ,完成了螺环倍半萜 (± ) -α-花柏烯 -3 -酮的全合成 .     

Spectroscopic study for photocatalytic decomposition of organic compounds on titanium dioxide containing sulfur under visible light irradiation

Yellowish S-containing TiO2 (S-TiO2) powders were prepared by calcination of a mixture of titanium(III) chloride and ammonium thiocyanate solutions. Three kinds of S-TiO2 were prepared by varying the concentration of ammonium thiocyanate (0.5, 1 or 13 M). X-ray photoelectron spectroscopy spectra of the S-TiO2 showed that sulfur atoms existed on the surface of TiO2 powders. But the peaks assigned to S disappeared after Ar+ etching, which means that these atoms were not doped in the bulk of the TiO2 powders. While UV-visible absorption spectra of S-TiO2 showed that the absorption edges of these photocatalysts were seen to shift to a longer wavelength (lower band gap energy) than those of undoped rutile TiO2 prepared and commercial anatase type TiO2 (ST-01). The S-TiO2 (1 M) exhibited higher photocatalytic activity than ST-01 for degradation of methylene blue in aqueous solution under visible light irradiation (lambda > 400 nm). It was also confirmed by IR spectroscopy that acetaldehyde in oxygen under visible light irradiation (lambda > 400 nm) was decomposed to acetic acid by the S-TiO2 and ST-01 at the first decomposition step.     

Adsorption properties and photocatalytic activity of TiO2 and La-doped TiO2

Photocatalysts of TiO₂ and La-doped TiO₂ were prepared by calcining the pure TiO₂ sols and the sols mixed with La(NO₃)₃⋅6H₂O at 873 K, respectively. These photocatalysts were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) and N₂ adsorption-desorption isotherms measurement. As results, the BET surface area, pore diameter, mesopore volume and micropore volume slightly increased, while the crystallite size and the phase structure were little affected by lanthanum doping. The equilibrium adsorption of methylene blue (MB) on the photocatalysts were measured in a dark room. The adsorption isotherms were confirmed to fit to the Langmuir theory. Photocatalytic activities of the photocatalysts were studied by employing the photocatalytic degradation of MB in water and degradation of acetaldehyde in air under UV-irradiation using a black light. Kinetic analysis revealed that the rate controlling steps could be the surface reaction of the adsorbed MB on the catalyst surface for MB degradation and the reaction of adsorbed acetaldehyde with the gaseous acetaldehyde for degradation of acetaldehyde, respectively.     

Synthesis, characterization, and catalytic reactivity of a highly basic macrotricyclic aminopyridine

The synthesis methods, physicochemical and structural characteristics, and catalytic reactivity of new macrocyclic proton chelators, N,N',N'-tris(p-tolyl)azacalix[3](2,6)(4-pyrrolidinopyridine) and N,N',N'-tris(p-tolyl)azacalix[3](2,6)(4-piperidinopyridine), are studied. The introduction of pyrrolidino and piperidino groups into the pyridine unit enables the enhancement of the synergistic proton affinity of the cavity of the macrotricycle giving a high basicity (pK(BH+) = 28.1 and 27.1 in CD(3)CN), resulting in a catalytic activity for the Michael addition of nitromethane with α,β-unsaturated carbonyl compounds.     

Two‐Step Synthesis of 1,3‐Disubstituted 3,4‐Dihydro‐4‐thioxoquinazolin‐2(1H)‐ones from 1‐Bromo‐2‐fluorobenzenes

An efficient synthesis of 3‐alkyl‐3,4‐dihydro‐4‐thioxobenzoquinazolin‐2(1H)‐ones 3 has been accomplished in two steps and in satisfactory yields from 1‐bromo‐2‐fluorobenzenes 1 . Thus, the reaction of 1‐fluoro‐2‐lithiobenzenes, generated by the Br/Li exchange between 1 and BuLi, with alkyl isothiocyanates, gives N‐alkyl‐2‐fluorobenzothioamides 2 , which, in turn, react with a series of isocyanates in the presence of NaH to give the desired products 3 .     

Determination of ethanol in alcoholic beverages by high-performance liquid chromatography-flame ionization detection using pure water as mobile phase

A method for the determination of ethanol in alcoholic beverages by high-performance liquid chromatography-flame ionization detection (HPLC-FID) was developed. An FID system could be directly connected to an HPLC system using pure water as a mobile phase. In a durability test using triacontylsilyl (C30)-silica gel stationary phase for 96 h, no significant change in the retention time of four alcohol compounds was observed. So the HPLC separation of alcoholic beverages was carried out on the C30-silica gel stationary phase. On application to the analysis of six kinds of alcoholic beverages, ethanol could be determined accurately by the proposed method.     

Quantitative monitoring of His and Asp phosphorylation in a bacterial signaling system by using Phos‐tag Magenta/Cyan fluorescent dyes

In the bacterial signaling mechanisms known as two‐component systems (TCSs), signals are generally conveyed by means of a His–Asp phosphorelay. Each system consists of a histidine kinase (HK) and its cognate response regulator. Because of the labile nature of phosphorylated His and Asp residues, few approaches are available that permit a quantitative analysis of their phosphorylation status. Here, we show that the Phos‐tag dye technology is suitable for the fluorescent detection of His‐ and Asp‐phosphorylated proteins separated by SDS‐PAGE. The dynamics of the His–Asp phosphorelay of recombinant EnvZ‐OmpR, a TCS derived from Escherichia coli, were examined by SDS‐PAGE followed by simple rapid staining with Phos‐tag Magenta fluorescent dye. The technique permitted not only the quantitative monitoring of the autophosphorylation reactions of EnvZ and OmpR in the presence of adenosine triphosphate (ATP) or acetyl phosphate, respectively, but also that of the phosphotransfer reaction from EnvZ to OmpR, which occurs within 1 min in the presence of ATP. Furthermore, we demonstrate profiling of waldiomycin, an HK inhibitor, by using the Phos‐tag Cyan gel staining. We believe that the Phos‐tag dye technology provides a simple and convenient fluorometric approach for screening of HK inhibitors that have potential as new antimicrobial agents.     

Anionic fullerenes, calixarenes, coronenes, and pyrenes as activators of oligo/polyarginines in model membranes and live cells

We report that the efflux of 5(6)-carboxyfluorescein anions from neutral egg yolk phosphatidylcholine vesicles is mediated by oligo/polyarginines only in the presence of activating amphiphilic anions. Screening of anion activators reveals best synergism for amphiphilic carboxylates (fullerene > calix[4]arene approximately coronene > pyrene > calix[6]arene > alkyl), whereas amphiphilic sulfates show less satisfactory activation despite often lower effective concentrations. The analogous alcohols and one calix[4]arene diphosphate were inactive. These results are discussed in the context of a tentative anion carrier mechanism, where interactions with bilayer (interface-directed translocation) and carrier (arene-templated carboxylate-guanidinium pairing) contribute to activator efficiencies. Applied to HeLa cells, pyrenebutyrate is shown to significantly increase the uptake of a fluorescently labeled octaarginine in a concentration-dependent manner.     

Efficient production of reference materials of hazardous organics using smart calibration by nuclear magnetic resonance

The accurate quantification of pesticide residues in food is an important factor in assuring the quality of life of our citizens. In general, chromatographic methods are used, which require certified reference materials (CRMs) for each analyte of interest for accurate quantitative analysis. Recently, regulation of pesticides in food, limiting the positive maximum residue (positive list system) has been brought into effect in Japan. Furthermore, ISO/IEC 17025 requires calibration and testing laboratories to program calibrations and measurements traceable to the International System of Units (SI). Accordingly, these laboratories need a suite of CRMs that are traceable to the SI. In order to address these requirements for every analyte of interest in an efficient manner, a new approach to producing SI traceable CRMs is required. Nuclear magnetic resonance (NMR) has been used widely in chemical analysis. One of the well known characteristics of NMR is the proportional relationship between peak area and the number of nuclei contributing to the peak. If accurate relative intensities of peak areas are obtained, this provides an attractive quantitative tool for organic compounds. The area of a signal from an analyte can be measured with respect to another signal originating from a comparator that has been added to the sample solution. The chosen comparator should not react with the analyte or resonate at any chemical shift similar to that of the analyte. This enables us to produce SI traceable CRMs more effectively. In this paper, we demonstrate a new approach for producing CRMs for pesticides using quantitative NMR??an SI traceable quantitative technique.     

Thermal desorption of N2 from (N2 + O2) coadsorbed on polycrystalline rhenium surfaces

The coadsorption of ¹⁵N₂ and O₂ on polycrystalline rhenium filament has been studied by thermal desorption mass spectroscopy. The sample was exposed to a mixture of ¹⁵N₂ and O₂ with various concentrations of ¹⁵N₂ at room temperature. It is suggested that NO on Re at low coverage is dissociative and the bonding strength of nitrogen on Re is weakened by the coadsorption with oxygen atoms.