Inverse electron demand asymmetric cycloadditions of cyclic carbonyl ylides catalyzed by chiral Lewis acids—Scope and limitations of diazo and olefinic substrates

High enantioselectivities (94-96% ee) were obtained for the inverse electron-demand 1,3-dipolar cycloadditions between cyclohexyl vinyl ether and 2-benzopyrylium-4-olate generated via Rh₂(OAc)₄-catalyzed decomposition of o-methoxycarbonyl-α-diazoacetophenone. The reactions were effectively catalyzed by Eu(OTf)₃, Ho(OTf)₃, or Gd(OTf)₃ complexes (10 mol %) of chiral 2,6-bis[(4S,5S)-4,5-diphenyl-2-oxazolinyl]pyridine. The reactions with the other electron-rich dipolarophiles such as allyl alcohol, 2,3-dihydrofuran, and butyl-tert-butyldimethylsilylketene acetal showed moderate enanantioselectivities (60-73% ee). Good to high enantioselectivities (73-97% ee) were also obtained for the cycloadditions between 3-acyl-2-benzopyrylium-4-olates, generated from methyl 2-(2-diazo-1,3-dioxoalkyl)benzoates and butyl or cyclohexyl vinyl ethers, in the presence of binaphthyldiimine (BINIM)-Ni(II) complexes (10 mol %). Under similar conditions, the reaction between methyl 2-(2-diazo-1,3-dioxohexyl)benzoate and 2,3-dihydrofuran was highly endo-selective, and moderately enantioselective (70% ee). For the BINIM-Ni(II)-catalyzed reactions of cyclohexyl vinyl ether, the use of an epoxyindanone as the 3-acyl-2-benzopyrylium-4-olate precursor revealed that the chiral Lewis acid can function as a catalyst for asymmetric induction. The scope of the cyclic carbonyl ylides was extended to those generated from 1-diazo-2,5-pentanedione derivatives, which were reacted with butyl or TBS vinyl ether and catalyzed using the (4S,5S)-Pybox-4,5-Ph₂-Lu(OTf)₃ complex to give good levels of asymmetric inductions (75-84% ee).     

Effective 2,6-substitution of piperidine nitroxyl radical by carbonyl compound

Nitroxyl radicals (nitroxides) with unpaired electron are widely used as antioxidants, contrast agents, and spin probes. Although piperidine nitroxyl radicals have many applications, these are mainly tetramethylpiperidine compounds, and only a few reports consider the substitution of N-O surround as a reaction site, such as 2,2,6,6-tetrasubstituted piperidine nitroxyl radicals. Our results revealed that the 2,6-position of the 2,2,6,6-tetramethylpiperidin-4-one compound was substituted by cyclohexyl groups to produce 2,2,6,6-tetrasubstituted piperidin-4-one derivatives under mild reaction conditions. An interesting result was obtained by using ¹⁵N-labeled NH₄Cl instead of ¹⁴NH₄Cl: it gave ¹⁵N-labeled 2,2,6,6-tetrasubstituted piperidin-4-one-1-oxyls with a high ¹⁵N content. In conclusion, the new method for the synthesis of nitroxyl radicals readily yields 2,2,6,6-tetrasubstituted piperidin-4-one under mild conditions.     

Properties of the πh_(9/2)  νi_(13/2) band in odd-odd ~(188)Au

A new rotational band has been identified and assigned to 188Au for the first time using the 173Yb(19F,4nγ) reaction at the beam energies of 86 and 90 MeV. This band is proposed to be built on the πh9/2  νi13/2 configuration by comparing the band properties with known bands in neighboring nuclei. The prolate-to-oblate shape transition through triaxial shape has been proposed to occur around 188Au for the πh9/2  νi13/2 bands in odd-odd Au isotopes on the basis of total Routhian surface (TRS) calculations.     

Detection of parametric resonance of trapped ions for micromotion compensation

We have detected excess micromotion of trapped ions by modulating the trapping voltage. This radio-frequency (rf) modulation induces parametric resonance and excites secular motion of the trapped ions when they possess excess motion. This technique has been applied to laser-cooled ions in a linear rf trap and it provides optimum values for compensating the trapping field. We found that the technique has sensitivity equal to or greater than the conventional method for detecting excess micromotion. Because any laser propagation direction can be used, this method is expected to be applied to surface-electrode traps.     

Effects of crystalline grain size and packing ratio of self-forming core/shell nanoparticles on magnetic properties at up to GHz bands

Self-forming core/shell nanoparticles of magnetic metal/oxide with crystalline grain size of less than 40 nm were synthesized. The nanoparticles were highly concentrated in an insulating matrix to fabricate a nanocomposite, whose magnetic properties were investigated. The crystalline grain size of the nanoparticles strongly influenced the magnetic anisotropy field, magnetic coercivity, relative permeability, and loss factor (tan δ=μ″/μ′) at high frequency. The packing ratio of the magnetic metallic phase in the nanocomposite also influenced those properties. High permeability with low tan δ of less than 1.5% at up to 1 GHz was obtained in the case of the nanoparticles with crystalline grain size of around 15 nm with large packing ratio of the nanoparticles.     

A Fast Algorithm For Finding A Maximum Free Multiflow In An Inner Eulerian Network And Some Generalizations

be a network, where is an undirected graph with nodes and edges, is a set of specified nodes of , called terminals, and each edge of has a nonnegative integer capacity . If the total capacity of edges with one end at is even for every non-terminal node , then is called inner Eulerian. A free multiflow is a collection of flows between arbitrary pairs of terminals such that the total flow through each edge does not exceed its capacity. In this paper we first generalize a method in Karzanov [11] to find a maximum integer free multiflow in an inner Eulerian network, in time, where is the complexity of finding a maximum flow between two terminals. Next we extend our algorithm to solve the so-called laminar locking problem on multiflows, also in time. We then consider analogs of the above problems in inner balanced directed networks, which means that for each non-terminal node , the sums of capacities of arcs entering and leaving are the same. We show that for such a network a maximum integer free multiflow can be constructed in time, and then extend this result to the corresponding locking problem. Received: March 24, 1997     

Implementing an efficient minimum capacity cut algorithm

In this paper, we present an efficient implementation of theO(mn + n ² logn) time algorithm originally proposed by Nagamochi and Ibaraki (1992) for computing the minimum capacity cut of an undirected network. To enhance computation, various ideas are added so that it can contract as many edges as possible in each iteration. To evaluate the performance of the resulting implementation, we conducted extensive computational experiments, and compared the results with that of Padberg and Rinaldi's algorithm (1990), which is currently known as one of the practically fastest programs for this problem. The results indicate that our program is considerably faster than Padberg and Rinaldi's program, and its running time is not significantly affected by the types of the networks being solved.Corresponding author.     

Solvent-induced selectivity switching: intermolecular allylsilylation, arylsilylation, and silylation of alkynes over montmorillonite catalyst

Proton-exchanged montmorillonite showed catalytic activity for intermolecular allylsilylation, arylsilylation, and terminal silylation of alkynes with allylsilanes. The reaction selectivity greatly depended on the solvent used. Reactions proceeded with various terminal alkynes and allylsilanes in good to moderate yields. The reaction pathways involving cationic Si species on the montmorillonite surface were also investigated.     

Mass balance method for purity assay of phthalic acid esters: development of primary reference materials as traceability sources in the Japan Calibration Service System

Purity assay of high-purity materials (HPMs) of phthalic acid esters (PAEs) was carried out by means of a mass balance method. In this method, chromatographic methods such as gas chromatography-flame ionization detector (GC-FID) and/or high-performance liquid chromatography (HPLC) in combination with other methods such as Karl-Fischer (KF) titration and vacuum evaporation (VE) were applied. The sum of the impurities estimated by these methods allowed the estimation of the purity of the main component by difference. Seven PAEs with varying side chain structures and levels of impurities were analysed on a systematic way in which impurities were classified into several groups in terms of their abundance, availability of qualitative information and availability of authentic compounds, etc. The absolute quantity of each impurity was determined by GC-FID and/or HPLC based on the calibration made by the authentic compounds of impurities whenever available. The purities in mass fraction of these PAEs were certified at the National Metrology Institute of Japan (NMIJ), and the PAEs were registered as primary reference materials playing an essential role in linking the metrological traceability of the Japan Calibration Service System (JCSS) to the International System of Units (SI).