Snytheses of analgesics. Part XXXVII. An alternative synthesis of 1,2,3,4, 5, 6-hexahydro-8-hydroxy-2,6-methano-6, h-dimethyl-3-phenethyl-3-benzazoeine [studies on the syntheses of heterocyclic compounds. Part DXXI]

Acid treatment of the alkylated products of (Va, Vb, and VIII) of piperidinols IVa and IVb, and tetrahydropyridine VII with β-bromoethylbenzene, afforded 1,2,3,4,5,6-hexahydro-8-hydroxy-2,6-methano-6,1 1-dimethyl-3-phenethyl-3-benzazocine (la) in good yield. Piperidinols Va and Vb were also obtained from the reaction of N-(3-methyl-3-pentenyl)-β-phenethylamine (IIb) with methyl 3-(4-methoxyphenyl)-2,3-epoxypropionate.     

Output and picosecond amplification characteristics of an efficient and high-power discharge excimer laser

Improvements in output pulse energy and efficiency of a conventional capacitor-transfer-type discharge excimer laser with automatic preionization have been achieved by extending the discharge volume and resulting moderate pumping of the active medium. The discharge laser produces a pulse energy of more than 1 J for XeCl, KrF, and ArF lasers in square beams of about 2×2 cm², and the maximum overall efficiency observed is 2.9% for XeCl, 3.2% for KrF and 1.8% for ArF. The laser device has been involved in a picosecond ( 32 ps) XeCl laser amplification system, and was operated as an amplifier at a repetitive frequency of 10 Hz. Saturation fluence for XeCl laser was measured to be 1.4 mJ/cm², and the picosecond pulse energy of 40 mJ was extracted from the amplifier.On leave from Ebara Corp., 6-6-7, Ginza, Chuo-ku, Tokyo 104, JapanOn leave from Mitsubishi Heavy Industries, LTD., 4-6-22, Kan-on shinmachi, Nishi-ku, Hiroshima 733, Japan     

Physical and Chemical Properties of Four-Membered Bis(triphenylphosphane)platinum(II) Sulfenato Thiolato Complexes

The reaction of isolable dithiirane 1-oxides with (Ph 3 P) 2 Pt( m 2 -C 2 H 4 ) provided the title complexes in high yields. 31 P NMR spectroscopy of the phosphine ligands of the complexes and x-ray crystallographic analysis of a complex were reported.     

Synthesis of end‐functionalized polyethers by phosphazene base‐catalyzed ring‐opening polymerization of 1,2‐butylene oxide and glycidyl ether

For the living ring‐opening polymerization (ROP) of epoxy monomers, the catalytic activity of organic superbases, tert‐butylimino‐tris(dimethylamino)phosphorane, 1‐tert‐butyl‐2,2,4,4,4‐pentakis(dimethylamino)‐2Λ⁵,4Λ⁵‐catenadi(phosphazene), 2,8,9‐triisobutyl‐2,5,8,9‐tetraaza‐1‐phosphabicyclo[3.3.3]undecane, and 1‐tert‐butyl‐4,4,4‐tris(dimethylamino)‐2,2‐bis[tris(dimethylamino)phosphoranylidenamino]‐2Λ⁵,4Λ⁵‐catenadi(phosphazene) (t‐Bu‐P₄), was confirmed. Among these superbases, only t‐Bu‐P₄ showed catalytic activity for the ROP of 1,2‐butylene oxide (BO) to afford poly(1,2‐butylene oxide) (PBO) with predicted molecular weight and narrow molecular weight distribution. The results of the kinetic, post‐polymerization experiments, and MALDI‐TOF MS measurement revealed that the t‐Bu‐P₄‐catalyzed ROP of BO proceeded in a living manner in which the alcohol acted as the initiator. This alcohol/t‐Bu‐P₄ system was applicable to the glycidol derivatives, such as benzyl glycidyl ether (BnGE) and t‐butyl glycidyl ether, to afford well‐defined protected polyglycidols. The α‐functionalized polyethers could be obtained using different functionalized initiators, such as 4‐vinylbenzyl alcohol, 5‐hexen‐1‐ol, and 6‐azide‐1‐hexanol. In addition, the well‐defined cyclic‐PBO and PBnGE were successfully synthesized using the combination of t‐Bu‐P₄‐catalyzed ROP and click cyclization. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

High-speed deposition of RE123 film with large current capacity by hot-wall type PLD system

We have studied a hot-wall heating system to produce GdBa₂Cu₃O_y (GdBCO) films with large critical currents (I_c) at a high production rate by a pulsed-laser-deposition (PLD) method. GdBCO films fabricated at a production rate of 30 m/h under the optimized conditions, especially a distance of 95 mm between the target and the substrate (T–S), exhibited high critical current densities (J_c) of about 3 MA/cm² and I_c over 300 A at a thickness of 1–2 μm. Furthermore, long GdBCO tapes prepared by repeated depositions at each tape-passing speed of 80 m/h showed uniform I_c distribution along the longitudinal direction, because the hot-wall system enabled to stabilize temperature within a few degrees at 800 °C. A 170 m long tape with I_c over 600 A was successfully fabricated at a production rate of 16 m/h using a laser power of 360 W.     

Synthesis and Cation-Binding Properties of (1→6)-2,5-Anhydro-D-glucitol with 3,4-Di-O-Pentyl and Decyl Groups by Cyclopolymerization of 1,2:5,6-Dianhydro-D-mannitols

Abstract

The cyclopolymerizations of 1,2:5,6-dianhydro-3,4-di-O-pentyl-D-mannitol (1b) and 1,2:5,6-dianhydro-3,4-di-O-decyl-D-mannitol (1c) were carried out using BF₃OEt₂ and t-BuOK. All the resulting polymers consisted of cyclic constitutional units, i.e., the extent of cyclization was 100%. The polymer structures for the polymerization with t-BuOK were (1→6)-2,5-anhydro-3,4-di-O-pentyl-D-glucitol (2b) and (1→6)-2,5-anhydro-3,4-di-O-decyl-D-glucitol (2c), whereas those with BF₃O-decyl₂ comprised 2,5-anhydro-D-glucitols as major units along with other cyclic ones. These polymers were soluble in n-hexane, CHCl₃, and THF, but insoluble in water, which differs from the amphiphilic solubility of (1→6)-2,5-anhydro-3,4-di-O-methyl-D-glucitol (2a). The cation-binding properties of 2b and 2c were examined using alkali-metal picrates in order to compare them with those of 2a. The extraction yields for each cation decreased in the order of 2c < 2b < 2a. Every polymer exhibited a similar cation-binding selectivity in the order Cs⁺ > Rb⁺ > K⁺ ? Na⁺ > Li⁺. The ratio of K⁺ and Na⁺, K⁺/Na⁺, was 4.6 for 2a, 5.1 for 2b, and 7.1 for 2c in the increasing order 2a < 2b > 2c.