A Pseudo-Random Frequency Modulation Continuous Wave Coherent Lidar Using an Optical Field Correlation Detection Method

We propose a new detection method for a pseudo-random frequency modulation continuous wave (RM-CW) coherent lidar. The feature of this method is modulation of local beam with a time delayed pseudo-random sequence. Heterodyne detection and correlation detection between the received beam and the local beam are simultaneously carried out in an optical field. In the RM-CW coherent lidar using the optical field correlation detection method, the received equipment is greatly simplified. We carried out preliminary experiments and demonstrated that the new method is effective for detection of a CW coherent lidar.     

Pulsed EPR Analysis of the Photo-Induced Triplet Radical Pair in the BLUF Protein SyPixD: Determination of the Protein–Protein Distance and Orientation in the Oligomeric Protein

A photo-induced radical pair of FADH^· and Y8^· and in BLUF protein SyPixD was studied by pulsed electron paramagnetic resonance (EPR) spectroscopy. Blue light illumination at 150 K for 30 min followed by cooling to 50 K during illumination induced the stable radical pair. The EPR signal has been characterized by a Pake doublet signal with complete S = 1 spin state. The radical pair was utilized as a probe to analyze the oligomer of SyPixD. The relative arrangement of PixD proteins in the complex was investigated by pulsed electron–electron double resonance (PELDOR) with the orientation selection. Based on the decameric structure in the crystal, the possible structure for the PELDOR results was discussed.     

Preparation of ZrO2 ultrathin films as gate dielectrics by limited reaction sputtering—On growth delay time at initial growth stage

ZrO₂ thin films were produced by limited reaction sputtering process varying the deposition parameters. An interesting growth phenomenon was observed in the initial growth stage of amorphous samples, appearing to suppress film growth for the first several minutes. The structures of such ultrathin ZrO₂ films were investigated by high-resolution Rutherford backscattering (HR-RBS) and X-ray photoelectron spectroscopy (XPS). The results suggest that the existence of interfacial suboxides due to the adsorption-induced surface reaction and diffusion-induced internal reaction, lead to the deteriorated interfacial performance. The mechanism and effects of the growth delay time on the interfacial characteristics are discussed in detail.     

Output and picosecond amplification characteristics of an efficient and high-power discharge excimer laser

Improvements in output pulse energy and efficiency of a conventional capacitor-transfer-type discharge excimer laser with automatic preionization have been achieved by extending the discharge volume and resulting moderate pumping of the active medium. The discharge laser produces a pulse energy of more than 1 J for XeCl, KrF, and ArF lasers in square beams of about 2×2 cm², and the maximum overall efficiency observed is 2.9% for XeCl, 3.2% for KrF and 1.8% for ArF. The laser device has been involved in a picosecond ( 32 ps) XeCl laser amplification system, and was operated as an amplifier at a repetitive frequency of 10 Hz. Saturation fluence for XeCl laser was measured to be 1.4 mJ/cm², and the picosecond pulse energy of 40 mJ was extracted from the amplifier.On leave from Ebara Corp., 6-6-7, Ginza, Chuo-ku, Tokyo 104, JapanOn leave from Mitsubishi Heavy Industries, LTD., 4-6-22, Kan-on shinmachi, Nishi-ku, Hiroshima 733, Japan     

Synthesis of nano-polycrystalline diamond from glassy carbon at pressures up to 25 GPa

ABSTRACT

Nano-polycrystalline diamond (NPD) with various grain sizes has been synthesized from glassy carbon at pressures 15–25?GPa and temperatures 1700–2300°C using multianvil apparatus. The minimum temperature for the synthesis of pure NPD, below which a small amount of compressed graphite was formed, significantly increased with pressure from ～1700°C at 15?GPa to ～1900°C at 25?GPa. The NPD having grain sizes less than ～50?nm was synthesized at temperatures below ～2000°C at 15?GPa and ～2300°C at 25?GPa, above which significant grain growth was observed. The grain size of NPD decreases with increasing pressure and decreasing temperature, and the pure NPD with grain sizes less than 10?nm is obtained in a limited temperature range around 1800–2000°C, depending on pressure. The pure NPD from glassy carbon is highly transparent and exhibits a granular nano-texture, whose grain size is tunable by selecting adequate pressure and temperature conditions.     

A study on the effect of filling factor for laser action in dielectric random media

In a random system composed of dielectric materials, laser action is expected to occur from the light localization caused by multiple scattering and interference effect. The wavelengths at which the laser oscillation occurs in random media depend on the mean free path of continuous scattering. Since the mean free path of continuous scattering is dependent on the filling factor, it is important to investigate systematically the effect of the filling factor for the laser action. In the present study, we calculate the Poynting vectors of the light emitted from two-dimensional random media consisting of dielectric rods with population inversion modeled by the negative imaginary part of relative permittivity. The spectra of the radiated Poynting vectors from the two-dimensional random media are shown for several different filling factors and for various values of population inversion. We try to find laser generation which occurs at low population inversion and discuss about the threshold of laser action occurring in dielectric structures with different filling factors. We also study the spacial distribution of the electric field amplitude in several frequency regions where light strongly amplifies.     

Chemical component mapping of pulverized toner by scanning transmission X-ray microscopy

Toners are micron scale polymer particles constructed of several kinds of resin, pigment, wax, etc. Transmission electron microscopy (TEM) is used for observation of the dispersion of the component materials in toners, but TEM images cannot identify simultaneously all components. Scanning transmission X-ray microscopy (STXM) not only provides simultaneous observation of spatial distributions of wax, resin and carbon black in toners, but it also provides detailed, quantitative, chemical information about the wax and resin environments through chemical component maps derived from multiple energy image sequences. The capabilities of STXM for toner analysis are illustrated by results of a study of a toner for black/white copy/print applications.     

Interrogation of fiber-Bragg-grating temperature and strain sensors with a temperature-stabilized VCSEL

The interrogation of fiber-Bragg-grating (FBG) sensors using a vertical-cavity surface-emitting laser (VCSEL) is discussed. A long-wavelength (1.54 μm) VCSEL was used as a wavelength-tunable source by variation in the current. Temperature stabilization was performed with a thermoelectric device. Characteristics of temperature and strain sensing were investigated. FBGs with different reflectivities were compared. For temperature sensing, the root-mean-square error in the measurement was reduced to 1/3 that without temperature stabilization. The dependence of the measurement error on the reflectivities of the FBGs was investigated. The measurement error was larger for FBGs with lower reflectivities in both temperature and strain sensing. Improvement on the sensing with low-reflectivity FBGs is discussed.     

Enhancement of sonochemical reaction of terephthalate ion by superposition of ultrasonic fields of various frequencies

The ultrasonic reactor with dual frequency was used and the effect of frequency on the fluorescence intensity of terephthalate ion was experimentally investigated in the frequency range from 176 to 635 kHz. The sonochemical reaction fields were visualized by using sonochemical luminescence of luminol solution. Compared with the fluorescence intensity of terephthalate ion for single frequency, the fluorescence intensity for dual frequency increased. The fluorescence intensity ratio of dual frequency to single frequency had maximum value when the frequency of transducer attached at the bottom wall was comparable in magnitude to that at the side wall. In the case of dual frequency, the sonochemical reaction fields became more extensive in the reactor and more intensive around the center of the reactor.