Rotation of methyl radicals in a solid argon matrix

Electron spin resonance (ESR) measurements were carried out to study the rotation of methyl radicals (CH3) in a solid argon matrix at 14-35 K temperatures. The radicals were produced by dissociating methane by plasma bursts generated either by a focused 193 nm laser radiation or a radio frequency discharge device during the gas condensation on the substrate. The ESR spectrum exhibits axial symmetry at the lowest temperature and is ascribed to ground state molecules with symmetric total nuclear spin function I=3/2. The hyperfine anisotropy (Aparallel)-Aperpendicular) was found to be -0.01 mT, whereas that of the g value was 2.5x10(-5). The anisotropy is observed for the first time in Ar and is manifested by the splitting of the low-field transition. Elevation of temperature leads reversibly to the appearance of excited state contribution having antisymmetric I=1/2. As a function of the sample temperature, the relative intensities of symmetric and antisymmetric spin states corresponding to ground and excited rotor states, respectively, proton hyperfine and electron g-tensor components, and spin-lattice relaxation rates were determined by a numerical fitting procedure. The experimental observations were interpreted in terms of a free rotation about the C3 axis and a thermal activation of the C2-type rotations above 15 K. The ground and excited rotational state energy levels were found to be separated by 11.2 cm-1 and to exhibit significantly different spin-lattice coupling. A crystal field model has been applied to evaluate the energy levels of the hindered rotor in the matrix, and crystal field parameter varepsilon4=-200 cm-1, corresponding to a 60 cm-1 effective potential barrier for rotation of the C3 axis, was obtained.     

Synthesis and catalytic application of chiral 1,1'-Bi-2-naphthol- and biphenanthrol-based pincer complexes: selective allylation of sulfonimines with allyl stannane and allyl trifluoroborate

New easily accessible 1,1'-bi-2-naphthol- (BINOL-) and biphenanthrol-based chiral pincer complex catalysts were prepared for selective (up to 85% enantiomeric excess) allylation of sulfonimines. The chiral pincer complexes were prepared by a flexible modular approach allowing an efficient tuning of the selectivity of the catalysts. By employment of the different enantiomeric forms of the catalysts, both enantiomers of the homoallylic amines could be selectively obtained. Both allyl stannanes and allyl trifluoroborates can be employed as allyl sources in the reactions. The biphenanthrol-based complexes gave higher selectivity than the substituted BINOL-based analogues, probably because of the well-shaped chiral pocket generated by employment of the biphenanthrol complexes. The enantioselective allylation of sulfonimines presented in this study has important implications for the mechanism given for the pincer complex-catalyzed allylation reactions, confirming that this process takes place without involvement of palladium(0) species.     

Unexpected Isomerization of Hexa-tert-butyl-octaphosphane

Octaphosphane {cyclo-(P₄tBu₃)}₂ ( 1 ) undergoes an unexpected isomerization reaction to the constitutional isomer 2,2′,2′′,2′′′,3,3′-hexa-tert-butyl-bicyclo[3.3.0]octaphosphane ( 2 ) in the presence of Lewis acidic metal salts. The mechanism of this reaction is discussed and elucidated with DFT calculations. The results underline the fascinating similarity between phosphorus-rich and isolobal carbon compounds. The new bicyclic octaphosphane 2 shows a dynamic behavior in solution and reacts with [AuCl(tht)] (tht=tetrahydrothiophene) to give a mono- ([AuCl( 2 -κP³)], 3 ) and a dinuclear complex ([(AuCl)₂( 2 -κP³,κP^3′)], 4 ). With cis-[PdCl₂(cod)] (cod=1,5-cyclooctadiene), the chelate complex ([PdCl₂( 2 -κ²P²,P^2′)], 5 ) with a different coordination mode of the ligand was obtained.     

Self assembly of Janus ellipsoids

We propose a primitive model of Janus ellipsoids that represents particles with an ellipsoidal core and two semisurfaces coded with dissimilar properties, for example, hydrophobicity and hydrophilicity, respectively. We investigate the effects of the aspect ratio on the self-assembly morphology and aggregation processes using Monte Carlo simulations. We also discuss certain differences between our results and those of earlier results for Janus spheres. In particular, we find that the size and structure of the aggregate can be controlled by the aspect ratio.     

A second order accuracy for a full discretized time-dependent Navier–Stokes equations by a two-grid scheme

We study a second-order two-grid scheme fully discrete in time and space for solving the Navier–Stokes equations. The two-grid strategy consists in discretizing, in the first step, the fully non-linear problem, in space on a coarse grid with mesh-size H and time step Δt and, in the second step, in discretizing the linearized problem around the velocity u _H computed in the first step, in space on a fine grid with mesh-size h and the same time step. The two-grid method has been applied for an analysis of a first order fully-discrete in time and space algorithm and we extend the method to the second order algorithm. This strategy is motivated by the fact that under suitable assumptions, the contribution of u _H to the error in the non-linear term, is measured in the L ² norm in space and time, and thus has a higher-order than if it were measured in the H ¹ norm in space. We present the following results: if h ² = H ³ = (Δt)², then the global error of the two-grid algorithm is of the order of h ², the same as would have been obtained if the non-linear problem had been solved directly on the fine grid.     

Metal-Free Aryl Cross-Coupling Directed by Traceless Linkers

The metal-free, highly selective synthesis of biaryls poses a major challenge in organic synthesis. The scope and mechanism of a promising new approach to (hetero)biaryls by the photochemical fusion of aryl substituents tethered to a traceless sulfonamide linker (photosplicing) are reported. Interrogating photosplicing with varying reaction conditions and comparison of diverse synthetic probes (40 examples, including a suite of heterocycles) showed that the reaction has a surprisingly broad scope and involves neither metals nor radicals. Quantum chemical calculations revealed that the C−C bond is formed by an intramolecular photochemical process that involves an excited singlet state and traversal of a five-membered transition state, and thus consistent ipso–ipso coupling results. These results demonstrate that photosplicing is a unique aryl cross-coupling method in the excited state that can be applied to synthesize a broad range of biaryls.     

Sustainable and highly controlled aryl couplings revealed by systematic assessment of photoactivatable linkers

The controlled synthesis of biphenyls, which play a prominent role in pharmaceuticals, agrochemicals, and liquid crystals, typically requires hazardous organometallic reagents, aryl halides, and heavy metal catalysts. We recently reported a metal-free, photochemical alternative (“photosplicing”) for the selective preparation of a wide range of pharmaceutically important biphenyls. Whereas the traceless sulfonamide linker enables and controls the aryl coupling, unwanted toxic byproducts are released. Therefore, we designed over 25 different temporary linkers and tested them for their suitability for the photosplicing reaction in a flow reactor. We found that a surprisingly high number of functional groups enable light-induced aryl fusion and identified a number of linkers for environmentally friendly procedures. We also report that a thiol-ene (click) – photosplicing sequence enables a convenient route to biaryls such as liquid crystals. This work sheds light on thus far neglected photochemistry of temporary linkers, reduces toxic byproducts, and expands the available starting materials for metal-free biphenyl synthesis.

A series of photoactivatable linkers for metal-free biphenyl synthesis is presented. Alternative substrates for the photosplicing reaction can reduce toxic byproducts and problematic starting materials.     

Analysis of nitromethane from samples exposed in vitro to chloropicrin by stable isotope dilution headspace gas chromatography with mass spectrometry

Chloropicrin (trichloronitromethane) is a widely used soil fumigant and an old chemical warfare agent. The metabolism of chloropicrin is not well known in mammals but nitromethane has been shown to be one of its main metabolites. Here, a fast and simple headspace gas chromatography with mass spectrometry method was applied for the measurement of nitromethane from aqueous samples. The analytical method was validated using stable isotope labeled internal standard and a small sample volume of 260 μL. No conventional sample preparation steps were needed. The method was accurate (relative standard deviations ≤1.5%) and linear (R² = 0.9996) within the concentration range of 0.1?6.0 μg/mL. This method was used to measure nitromethane in in vitro incubations with human and pig liver cell fractions containing enzymes for xenobiotic metabolism, exposed to chloropicrin. The results indicate that the presence of glutathione is necessary for the formation of nitromethane from chloropicrin. Also, nitromethane was formed mostly in liver cytosol fractions, but not in microsomal fractions after the incubation with chloropicrin. Our results suggest that although nitromethane is not the unequivocal biomarker of chloropicrin exposure, this method could be applied for screening the elevated levels in humans after chloropicrin exposure.