On neighborhoods and partial sums of certain meromorphic multivalent functions

The main purpose of the present paper is to derive some properties associated with the neighborhoods and partial sums of a certain class of meromorphic multivalent functions.     

Time‐resolved free carrier lifetime microscopy in bulk GaN

A novel setup for lifetime microscopy measurements was designed and applied for carrier lifetime mapping in a bulk GaN. Photoexcitation by a picosecond UV pump and detection of time‐resolved free carrier absorption (FCA) images on a CCD camera enabled the mapping of carrier lifetime distribution with a spatial resolution of 5 μm. The spatial variation of lifetime in the bulk HVPE‐grown GaN revealed the presence of different‐size crystalline grains, with lifetime peaking up to 70 ns in the centers of the largest grains (～20 μm in diameter) and dropping to 10 ns in the small ones, while the spatially averaged lifetime was 40 ns. The inhomogeneity was ascribed to the interplay of nonradiative diffusion‐limited recombination at grain boundaries and a bulk lifetime in the crystallite centers. The numerical solution of spatially‐resolved carrier decay rate in the crystallite centers at high injection levels and comparison with experimental data provided a bulk nonradiative recombination time of ～70 ns. (© 2013 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Successful application of monolithic innovative technology using a carbonyldiimidazole disk to purify supercoiled plasmid DNA suitable for pharmaceutical applications

The growing demand on plasmid DNA (pDNA) manufacture for therapeutic applications requires a final product with higher quality and quantity, spending the least time. Most of the current processes for pDNA production use at least one chromatographic step, which often constitutes a key-step in the purification sequence. Monolithic stationary phases are new alternatives to the conventional matrices, which offer fast separation of pDNA due to their excellent mass transfer properties and their high binding capacity for large molecules, as pDNA. However, the efficient recovery of pure pDNA focuses on a suitable balance of the feedstock, adsorbent and mobile phase properties. To satisfy the increasing demand for pharmaceutical grade plasmids, we developed a novel downstream process which overcomes the bottlenecks of common lab-scale techniques while complying with all regulatory requirements. This work reports an integrative approach using the carbonyldiimidazole monolith to efficiently purify the supercoiled (sc) pDNA active conformation from other plasmid topologies and Escherichia coli impurities present in a clarified lysate. The monolith specificity and selectivity was also assessed by performing experiments with plasmids of several sizes of 2.7, 6.05 and 7.4 kilo base pairs (kbp), verifying the applicability to purify different plasmids. Hence, the process yield of the pDNA purification step using the CDI monolith was 89%, with an extremely reduced level of impurities (endotoxins and gDNA), which was reflected in good transfection experiments of the sc plasmid DNA sample. Overall, the analytical results and transfection studies performed with the pDNA sample purified with this monolithic enabling technology, confirmed the suitability of this pDNA to be used in pharmaceutical applications.     

Protein alignment: Exact versus approximate. An illustration

We illustrate solving the protein alignment problem exactly using the algorithm VESPA (very efficient search for protein alignment). We have compared our result with the approximate solution obtained with BLAST (basic local alignment search tool) software, which is currently the most widely used for searching for protein alignment. We have selected human and mouse proteins having around 170 amino acids for comparison. The exact solution has found 78 pairs of amino acids, to which one should add 17 individual amino acid alignments giving a total of 95 aligned amino acids. BLAST has identified 64 aligned amino acids which involve pairs of more than two adjacent amino acids. However, the difference between the two outputs is not as large as it may appear, because a number of amino acids that are adjacent have been reported by BLAST as single amino acids. So if one counts all amino acids, whether isolated (single) or in a group of two and more amino acids, then the count for BLAST is 89 and for VESPA is 95, a difference of only six. © 2015 Wiley Periodicals, Inc.     

A simple QuEChERS-like extraction approach for molecular chemical characterization of organic aerosols: application to nitrated and oxygenated PAH derivatives (NPAH and OPAH) quantified by GC–NICIMS

An extraction procedure based on the Quick Easy Cheap Effective Rugged and Safe (QuEChERS) approach has been developed and used for analysis of particle-bound nitrated and oxygenated PAH derivatives (NPAH and OPAH, respectively). Several analytical conditions, for example GC injection temperature and MS detection settings, were optimized. This analytical procedure enabled simultaneous GC–NICIMS quantification of 32 NPAH and 32 OPAH (or other oxygenated compounds), including typical components of secondary organic aerosol (SOA) formed by photooxidation of PAH (e.g. 2-formyl-trans-cinnamaldehyde and 6H-dibenzo[b,d]pyran-6-one). The QuEChERS-like approach was optimized, including the nature of the extraction solvent, the sorbent used for clean-up, and extraction time. The final extraction procedure was based on brief mechanical agitation (vortex mixing for 1.5 min), with 7 mL acetonitrile as solvent. Because dispersive solid-phase extraction (d-SPE) did not provide satisfactory results, SPE using SiO₂ was selected for sample purification. Identical results were obtained when the QuEChERS-like and traditional pressurised solvent extraction (PLE) procedures were compared for analysis of fortified ambient air particle samples. The procedure was validated by analysis of two aerosol standard reference materials (NIST SRM 1649b (urban dust) and SRM 2787 (fine particulate matter, <10 μm)). For numerous NPAH and OPAH, this is the first report of their quantification in both SRMs. Compared with other extraction methods, including PLE, the QuEChERS-like procedure resulted in increased productivity and reduced extraction cost. This paper shows that QuEChERS-like extraction procedures can be suitably adapted for molecular chemical characterization of aerosol samples and could be extended to other categories of compound.

Hot‐electron drift velocity and hot‐phonon decay in AlInN/AlN/GaN

A nanosecond‐pulsed current–voltage technique was applied to study hot‐electron transport along the two‐dimensional electron gas channel confined at a nominally undoped AlInN/AlN/GaN heterointerface. Hot‐electron drift velocity was deduced under the assumptions of uniform longitudinal electric field and field‐independent electron sheet density. At a fixed electric field strength, a resonance‐type non‐monotonous dependence of the velocity on the electron density was found in the investigated range from 1 to When the electric field increased from 20 kV/cm to 80 kV/cm, the peak velocity increased from ～1.1 to cm/s, and the position of the resonance shifted from ～1.1 to ～1.2 respectively. The resonance position correlates with that for the fastest decay of hot phonons known from independent experiment. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

XDesign: an open‐source software package for designing X‐ray imaging phantoms and experiments

The development of new methods or utilization of current X‐ray computed tomography methods is impeded by the substantial amount of expertise required to design an X‐ray computed tomography experiment from beginning to end. In an attempt to make material models, data acquisition schemes and reconstruction algorithms more accessible to researchers lacking expertise in some of these areas, a software package is described here which can generate complex simulated phantoms and quantitatively evaluate new or existing data acquisition schemes and image reconstruction algorithms for targeted applications.     

Effects on measurement of photon-atom scattering of applied pressures on sample at different thickness

N_coh/N_Comp and NK_β/NK_α intensity ratios of scattered photons by Zn in the linear region and the infinite mass thickness region are measured as functions of the pressure used for compressing the pellets with a Si(Li) detector using Am-241 and Fe-55 annular source. Besides, the effect on the experimental intensity ratio of relation between two different thicknesses of sample with applied different pressures on the sample is investigated in this study. Harmony between the linear and infinitive (critical) thickness region and the applied pressure on the sample has directly affected the experimental intensity ratios. Experimental results were not compared with various theoretical values in the literature, for present results constitute the first experimental measurements.