Two-Stage Fractionation of a Mixture of Pesticides by Micropreparative TLC and HPLC

JPC – Journal of Planar Chromatography – Modern TLC - A ten-component mixture of pesticides was applied to the edge of the layer in ‘frontal + elution’ mode for preliminary...     

Multicomponent analysis with a computerized flow injection system using LED photometric detection

An original computer-controlled solid-state photometer has been developed and its potential for simultaneous multicomponent flow-injection analysis of binary and ternary mixtures is demonstrated. The device is simple in construction. Its principle of operation is based on rapid sequential measurements of the absorbance of the complexes formed by the analytes with chromogenic reagents at the wavelengths corresponding to the emission maxima of three light emitting diodes (563, 580 and 638 nm).     

Improved selectivity and detection limit of the carbonate-selective electrode

The properties of the carbonate neutral carrier 4-( n-hexadecyl)-3-nitro-1-trifluoroacetylbenzene were compared with those of a similar carrier, without a nitro group, studied previously. In spite of differences in the Hammett constant of the carbonyl group responsible for interaction with the analyte, the analytical characteristics of both carriers, measured under the same conditions, were comparable. Special care was taken to avoid the presence of an excessive carbon dioxide level in the diffusion layer at the membrane-solution interface. The internal reference solution was prepared without carbonate components; the external solution was protected from contact with atmospheric carbon dioxide. Under such conditions the detection limit of both electrodes was extended to 10(-11 )mol L(-1), and the selectivity towards salicylate, chloride, and acetate was significantly improved.     

Stationary phases with special structural properties for high-throughput separation techniques: preparation, characterization and applications

Stationary phases with specific structural properties for high-throughput liquid chromatographic (LC) techniques are described. Special attention was paid to phases with special structural properties, mainly containing internal functional group (e.g. amide). Such materials are generally called "embedded phases". There are phases created in amidation process of aminopropylated silica gel, especially phases based on biological compounds, like phospholipids and cholesterol, which are called immobilized artificial membranes (IAM's). The synthesis and applications of polar embedded amide LC stationary phases were also reviewed. Methods of characterization of synthesized packing materials were presented, with general focusing on spectroscopic measurements like (13C and 29Si CP/MAS NMR and FT-IR), elemental and thermal analysis as well as chromatographic quantitative structure-retention relationships (QSRR) and extended chemometric tests. The potential applications of various dedicated stationary phases in a high-throughput LC screening procedures were also presented.     

Nanostructured carbon arrays from block copolymers of polyacrylonitrile

Arrays of graphitic carbon nanoclusters were obtained by pyrolysis of nanoscale phase-separated block copolymers of polyacrylonitrile and poly(n-butyl acrylate). Upon heating in an inert atmosphere to temperatures ranging from approximately 400 to 1200 degrees C, polyacrylonitrile domains were converted into carbon nanoclusters, maintaining the overall shape and spacing, whereas the poly(n-butyl acrylate) phase was sacrificed. Preservation of the original nanoscale morphology of a block copolymer was possible only if pyrolysis was preceded by oxidation at temperatures of approximately 230 degrees C, in analogy with thermal stabilization of polyacrylonitrile precursor in the process used in the manufacturing of carbon fibers. Preorganization of the carbon precursor through self-assembly in block copolymers of polyacrylonitrile appears to be an attractive and robust strategy for templated synthesis of well-defined nanostructured carbon materials.     

Generation and reactions of substituted phenide anions in an electrospray triple quadrupole mass spectrometer

Substituted benzoic acid anions undergo decarboxylation in the medium-pressure region of an electrospray ion source yielding in most cases the correspondingly substituted phenide anions in high yield. The location of the anionic center is specified by the position of the carboxylic group. The only exceptions are compounds with substituents containing acidic hydrogen atoms, like OH and NH(2) groups. For such compounds, either an intra- or an intermolecular (mediated by the molecules of methanol or water) proton transfer from the more acidic position to the benzene ring is observed. The generated anions can be selected using the first quadrupole for studying their ion-molecule chemistry in the second quadrupole of a triple quadrupole mass spectrometer. Their reactions with CO(2), O(2), CH(3)COCH(3) and CCl(4) may serve as typical examples. The general applicability of this method for the generation of phenide anions has been confirmed on three different mass spectrometers. Experiments performed using carboxylic acids other then benzoic acid and its derivatives show that this method is not limited to phenide anions and can be used for the generation of a much wider range of carbanions in the gas phase.     

Side effects in measurements of selectivity coefficients of solid state ion selective electrodes

The influence of various factors such as solubility, the oxidation of the membrane, and the contamination of the solution, on the experimental values of the selectivity coefficients of solid state sulphide ion selective electrodes is discussed. A new method for the evaluation of very small selectivity coefficients, based on the addition of reagents forming complexes or insoluble salts with the main ion, is proposed. By means of this method, selectivity coefficients for silver, copper, cadmium and lead ion selective electrodes have been determined, which are in far better agreement with thermodynamic values than those described in the literature.     

Link between the kinetic‐ and exchange‐energy functionals in the generalized gradient approximation

An approximate kinetic‐energy functional of the generalized gradient approximation form was derived following the “conjointness conjecture” of Lee, Lee, and Parr. The functional shares the analytical form of its gradient dependency with the exchange‐energy functionals of Becke and Perdew, Burke, and Ernzerhof. The two free parameters of this functional were determined using the exact values of the kinetic energy of He and Xe atoms. A set of 12 closed‐shell atoms was used to test the accuracy of the proposed functional and more than 30 others taken from the literature. It is shown that the conjointness conjecture leads to a very good class of kinetic‐energy functionals. Moreover, the functional developed in this work is shown to be one of the most accurate despite its simple analytical form. © 2002 Wiley Periodicals, Inc. Int J Quantum Chem, 2002     

Structure-driven design and synthesis of chiral dioxocyclam derivatives

Based on an analysis of previously reported structures and a potential geometry fit with substrates, a new family of chiral dioxocyclam derivatives have been designed. The synthesis of those ligands was accomplished starting from l-proline and α-d-amino acids (converted to β-amino acids) with a key step of macrocyclization reaction of amino esters. All ligands were converted into neutral copper(II) complexes (amide groups underwent deprotonation of upon treatment of ligands with copper(II) acetate). The complexes exhibit the desired shape of their active surfaces, as proved by X-ray analysis.