Simultaneous determination of perfluoroalkyl phosphonates, carboxylates, and sulfonates in drinking water

A trace analytical method based on high performance liquid chromatography coupled to quadrupole time-of-flight high resolution mass spectrometry was developed for simultaneous determination of perfluoroalkyl phosphonates (PFPAs, carbon chain lengths C6,8,10), perfluoroalkyl carboxylates (PFCAs, C5-12), and perfluoroalkyl sulfonates (PFSAs, C4,6,8,10) in drinking water (tap water). Analytes were enriched on a mixed mode co-polymeric sorbent (C8+quaternary amine) using solid phase extraction. Chromatographic separation was achieved on a Zorbax Extend C18 reversed phase column using a mobile phase gradient consisting of water, methanol, and acetonitrile containing 2mM ammonium acetate and 5 mM 1-methyl piperidine. The mass spectrometer was operated in electrospray negative ion mode. Use of 1-methyl piperidine in the mobile phase resulted in a significant increase in instrument sensitivity for PFPAs through improved chromatographic resolution, background suppression, and increased ionization efficiency. Method detection limits for extraction of 500 mL tap water were in the ranges of 0.095-0.17 ng/L, 0.027-0.17 ng/L, and 0.014-0.052 ng/L for PFPAs, PFCAs, and PFSAs, respectively. Whole method recoveries at a spiking level of 0.5 ng/L to 500 mL HPLC grade water were 40-56%, 56-97%, and 55-77% for PFPAs, PFCAs, and PFSAs, respectively. A matrix effect (signal enhancement) was observed in the detection of PFPAs in tap water extracts, leading to calculated recoveries of 249-297% at a 0.5 ng/L spiking level. This effect resulted in an additional improvement of method sensitivity for PFPAs. To compensate for the matrix effect, PFPAs in tap water were quantified using matrix-matched and extracted calibration standards. The method was successfully applied to the analysis of drinking water collected from six European countries. PFPAs were not detected except for perfluorooctyl phosphonate (PFOPA) at close to the detection limit of 0.095 ng/L in two water samples from Amsterdam, the Netherlands. Highest levels were found for perfluorobutane sulfonate (PFBS, 18.8 ng/L) and perfluorooctanoate (PFOA, 8.6 ng/L) in samples from Amsterdam as well as for perfluorooctane sulfonate (PFOS, 8.8 ng/L) in tap water from Stockholm, Sweden.     

Investigating the spectrum of biological activity of substituted quinoline-2-carboxamides and their isosteres

In this study, a series of thirty-five substituted quinoline-2-carboxamides and thirty-three substituted naphthalene-2-carboxamides were prepared and characterized. They were tested for their activity related to the inhibition of photosynthetic electron transport (PET) in spinach (Spinacia oleracea L.) chloroplasts. Primary in vitro screening of the synthesized compounds was also performed against four mycobacterial species. N-Cycloheptylquinoline-2-carboxamide, N-cyclohexylquinoline-2-carboxamide and N-(2-phenylethyl)quinoline-2-carboxamide showed higher activity against M. tuberculosis than the standards isoniazid or pyrazinamide and 2-(pyrrolidin-1-ylcarbonyl)quinoline and 1-(2-naphthoyl)pyrrolidine expressed higher activity against M. kansasii and M. avium paratuberculosis than the standards isoniazid or pyrazinamide. The most effective antimycobacterial compounds demonstrated insignificant toxicity against the human monocytic leukemia THP-1 cell line. The PET-inhibiting activity expressed by IC(50) value of the most active compound N-benzyl-2-naphthamide was 7.5 μmol/L. For all compounds, the structure-activity relationships are discussed.     

Regioselective Hydrolysis of Cocaine and A Convenient Acylation Procedure by Benzoylecgonine

Regioselective hydrolysis of cocaine led, according to the reaction conditions, either to benzoylecgonine or to ecgonine methyl ester. Acylation with benzoylecgonine was readily achieved when benzotriazolyloxytrisdimethylamino-phosphonium (BOP) was used as a coupling agent.     

Determination of melengestrol acetate in bovine tissues by automated coupled-column normal-phase high-performance liquid chromatography

A method has been developed for the determination of melengestrol acetate in bovine tissues at lower levels than previously reported. Liquid-liquid extraction of tissue homogenates provided crude clean-up while final isolation, screening, and quantification was done on-line with an automated, normal-phase, coupled-column high-performance liquid chromatographic system. The chromatographic system included phenyl and silica analytical columns for the purposes of isolation and final separation, respectively. These columns provided a large difference in selectivity when operated under normal-phase conditions which allowed for the efficient isolation of melengestrol acetate from the complex tissue extracts. Mobile phases were composed of hexane and dichloromethane modified with methanol and water. Transfer and enrichment of the analyte from the primary phenyl column to the silica column was via a short (12 mm x 4 mm I.D.) silica column. Regeneration and equilibration of the phenyl column was performed after the injection of each tissue extract and was accomplished simultaneously while analytical separation occurred on the final silica column. Routing of the mobile phases and regeneration solvent was performed with automated switching valves. The total time required for each analysis was 12 min. Quantification is demonstrated using external standards with UV detection at 287 nm. The overall recovery of the method was 86% with a coefficient of variation of 9.84% at the 10 ppb [the American billion (10(9] is used in this article] level in bovine liver extracts.     

The chemical reactivity of a known anti-psoriasis drug. Part 1: Further insights into the products resulting from oxidative cleavage

The oxidative cleavage of the known anti-psoriasis drug 1 to give 2 has been reported previously. Due to the importance of accessing medium-sized ring containing systems via oxidative cleavage, this reaction has been revisited revealing additional information about the structure of 2. Alternative reaction products were identified when the reaction was carried out in the presence of water. The conversion of 1 to 2 has also been carried out using ruthenium tetroxide. A detailed variable temperature NMR and computational study of the restricted rotation of the N-aryl ring in 2 is presented.     

Analysis of multiple mycotoxins in beer employing (ultra)-high-resolution mass spectrometry

The objective of the presented study was to develop and optimize a simple, high-throughput method for the control of 32 mycotoxins (Fusarium and Alternaria toxins, aflatoxins, ergot alkaloids, ochratoxins, and sterigmatocystin) in beer. Due to the broad range of their physicochemical properties, the sample preparation step was simplified as much as possible to avoid analyte losses. The addition of acetonitrile to beer samples enabled precipitation of abundant matrix components. The clean-up efficiency was controlled by ambient mass spectrometry employing a direct analysis in real time (DART) ion source. For determination of analytes, ultra-high-performance liquid chromatography hyphenated with high-resolution mass spectrometry utilizing an orbitrap (U-HPLC-orbitrapMS) or time-of-flight (TOFMS) technology was used. Because of significantly better detection capabilities of the orbitrap technology, the U-HPLC-orbitrapMS method was chosen as a determinative step and fully validated. To compensate matrix effects, matrix-matched calibration was employed. The lowest calibration levels for most of the target mycotoxins ranged from 1 to 8 μg L(-1) beer and the recoveries of analytes were in range from 86 to 124%.     

Heats of formation of C(6)H(5)(•), C(6)H(5)(+), and C(6)H(5)NO by threshold photoelectron photoion coincidence and active thermochemical tables analysis

Threshold photoelectron photoion coincidence has been used to prepare selected internal energy distributions of nitrosobenzene ions [C(6)H(5)NO(+)]. Dissociation to C(6)H(5)(+) + NO products was measured over a range of internal energies and rate constants from 10(3) to 10(7) s(-1) and fitted with the statistical theory of unimolecular decay. A 0 K dissociative photoionization onset energy of 10.607 ± 0.020 eV was derived by using the simplified statistical adiabatic channel model. The thermochemical network of Active Thermochemical Tables (ATcT) was expanded to include phenyl and phenylium, as well as nitrosobenzene. The current ATcT heats of formation of these three species at 0 K (298.15 K) are 350.6 (337.3) ± 0.6, 1148.7 (1136.8) ± 1.0, and 215.6 (198.6) ± 1.5 kJ mol(-1), respectively. The resulting adiabatic ionization energy of phenyl is 8.272 ± 0.010 eV. The new ATcT thermochemistry for phenyl entails a 0 K (298.15 K) C-H bond dissociation enthalpy of benzene of 465.9 (472.1) ± 0.6 kJ mol(-1). Several related thermochemical quantities from ATcT, including the current enthalpies of formation of benzene, monohalobenzenes, and their ions, as well as interim ATcT values for the constituent atoms, are also given.