Oxovanadium(IV) and -(V) complexes of dithiocarbazate-based tridentate Schiff base ligands: syntheses,structure, and photochemical reactivity of compounds involving imidazole derivatives as coligands

The tridentate dithiocarbazate-based Schiff base ligands H(2)L (S-methyl-3-((5-R-2-hydroxyphenyl)methyl)dithiocarbazate, R = NO(2), L = L(2); R = Br, L = L(3)) react with [VO(acac)(2)] in the presence of imidazole derivatives as coligands to form oxovanadium(IV) and cis-dioxovanadium(V) complexes. With benzimidazole and N-methylimidazole, the products are oxovanadium(IV) complexes, viz. [VOL(3)(BzIm)].0.5CH(3)CN (1a) and [VOL(N-MeIm)(2)] (L = L(3), 1b; L = L(2), 1c), respectively. In both 1a,b, the O and S donor atoms of the tridentate ligand are cis to the terminal oxo group (in the "equatorial" plane) and mutually trans, but the N donor atom is respectively cis and trans to the oxo atom, as revealed from X-ray crystallography. When imidazole or 4-methylimidazole is used as the ancillary ligand, the products obtained are water-soluble cis-dioxovanadium(V) complexes [VO(2)L(R'-ImH)] (L = L(3) and L(2), R' = H and Me, 2a-d). These compounds have zigzag chain structures in the solid state as confirmed by X-ray crystallographic investigations of 2a,d, involving an alternating array of LVO(2)(-) species and the imidazolium counterions held together by Coulombic interactions and strong hydrogen bonding. Complexes 2a-d are stable in water or methanol. In aprotic solvents, viz. CH(3)CN, DMF, or DMSO, however, they undergo photochemical transformation when exposed to visible light. The putative product is a mixed-oxidation divanadium(IV/V) species obtained by photoinduced reduction as established by EPR, electronic spectroscopy, and dynamic (1)H NMR experiments.     

Flexibility in the partial reduction of 2,5-disubstituted pyrroles: application to the synthesis of DMDP

[reaction: see text] The partial reduction of electron-deficient 2,5-disubstituted pyrroles has been developed into a flexible procedure that gives control of relative stereochemistry by variation of the reduction conditions. After the reaction, the pyrroline products were dihydroxylated at C-3,4 to give either the cis or trans isomers; this flexibility means that a variety of polyhydroxylated pyrrolidines can be prepared in a short sequence. Finally, this method was applied to a synthesis of the naturally occurring glycosidase inhibitor DMDP.     

Three 4‐amino­quinolines of anti­malarial interest

The structures of three compounds with potential anti­malarial activity are reported. In N,N‐diethyl‐N′‐(7‐iodo­quinolin‐4‐yl)ethane‐1,2‐diamine, C₁₅H₂₀IN₃, (I), the mol­ecules are linked into ribbons by N—H⋯N and C—H⋯N hydrogen bonds. In N‐(7‐bromo­quinolin‐4‐yl)‐N′,N′‐diethyl­ethane‐1,2‐diamine dihydrate, C₁₅H₂₀BrN₃·2H₂O, (II), two amino­quino­line mol­ecules and four water mol­ecules form an R₅⁴(13) hydrogen‐bonded ring which links to its neighbours to form a T5(2) one‐dimensional infinite tape with pendant hydrogen bonds to the amino­quinolines. The phosphate salt 7‐chloro‐4‐[2‐(diethyl­ammonio)ethyl­amino]quinolinium bis­(dihydrogen­phosphate) phospho­ric acid, C₁₅H₂₂ClN₃²⁺·2H₂PO₄⁻·H₃PO₄, (III), was prepared in order to establish the protonation sites of these compounds. The phosphate ions form a two‐dimensional hydrogen‐bonded sheet, while the amino­quino­line cations are linked to the phosphates by N—H⋯O hydrogen bonds from each of their three N atoms. While the conformation of the quinoline region hardly varies between (I), (II) and (III), the amino side chain is much more flexible and adopts a significantly different conformation in each case. Aromatic π–π stacking inter­actions are the only supramolecular inter­actions seen in all three structures.     

Synthesis and photochromic properties of molecules containing [e]-annelated dihydropyrenes. Two and three way pi-switches based on the dimethyldihydropyrene-metacyclophanediene valence isomerization

The syntheses of several new simple negative, a simple positive, and multiple negative photochromes containing the dihydropyrene-cyclophanediene photochromic system are described. The photo-openings of the negative photochromes, the [e]-annelated benzo (7), naphtho (9), anthro (11), furano (19), and triphenyleno (15) derivatives of the parent 2,7-di-tert-butyl-trans-10b,10c-dimethyl-dihydropyrene (5), as well as its 4,5-dibromo derivative (13), are described to give the corresponding cyclophanedienes, as well as their photoclosures and thermal closures back to the dihydropyrenes. These are compared to the results obtained for the positive photochrome dibenzo[e,l]dihydropyrene (21) and to the bis(dihydropyreno)chrysene (44) and the (dihydropyrenobenzo)(benzo)metacyclophanediene (47) photochromes, which have more than one photochromic switch present and thus have more than a simple "on-off" state. Thermodynamic data are obtained for the thermal closing reactions. The anthrodihydropyrene (12) has the fastest thermal closing (tau(1/2) = 20 min), while the furanodihydropyrene (19') has the slowest (tau(1/2) = 63 h) at 46 degrees C. An electrochemical readout of the state of the switch is demonstrated for the benzodihydropyrene (7).     

Geometry changes of a Cu(I) phenanthroline complex on photoexcitation in a confining medium by time-resolved X-ray diffraction

Using a stroboscopic technique, in which the molecule is repeatedly excited and the structural change is probed more than 5000 times per second immediately after excitation, we performed a 16 K time-resolved single-crystal study of the microsecond lifetime triplet state of the Cu(I)phenanthroline derivative[Cu(I)(dmp)(dppe)][PF6] (dppe = 1,2-bis(diphenylphosphino)ethane). The geometry changes on excitation differ for the two symmetry-independent molecules, but are in the same direction as calculated for an isolated reference molecule, although the flattening distortion in the crystal is significantly smaller, implying that the reorganization energy is greatly affected by the confining medium.     

Secondary bonding interactions observed in two arsenic thiolate complexes

Treatment of N-(2-mercaptoethyl)-1,8-naphthalimide (HL) with stoichiometric amounts of AsCl(3) and base affords AsL(2)Cl and AsL(3) complexes stabilized in part by secondary As...O bonding interactions.     

Amidrazones. VII. Formation of s-triazines by thermolysis of N1-benzyl-substituted amidrazone ylides

The preparation of ylides of the general structure is described. Thermolysis of 14a (R = CH₃, R' = H, Ar = C₆H₅) gave dimethylamine and 2,4-dimethyl-6-phenyl-s-triazine. Thermolysis of ylides 14b (R = C₆H₅; R' = CH₃, Ar = C₆H₅) and 14c (R = C₆H₅, R' = CH₃, Ar = p-tolyl) gave dimethylamine, ArCH = NCH₃ and 1-methyl-2-Ar-4,6-diphenyl-1,2-dihydro-s-triazines ( 19a,b ). Triazines 19a and 19b were also prepared by condensation of N-methylbenzamidine with benzaldehyde and p-tolualdehyde, respectively. Thermolysis of 14d (R = C₆H₅, R¹ = CH₂C₆H₅,Ar = C₆H₅) gave 1-benzyl-2,4,6-triphenyl-1,2-dihydro-s-triazine ( 19c ) and N-benzylidenebenzylamine. Mechanistic aspects of these reactions are discussed.     

β-Substituted ketene thioacetals as β-lithioacrylate equivalents. The synthesis of (±)-eldanolide

Lithiation of 1,1-bis(phenylthio)-3-phenylthio-1-propene 3 and reaction with a range of electrophiles gave exclusively the γ-substituted product 4. This reagent has been used in a short synthesis of the pheromone, (±)-eldanolide.     

Synthesis and Characterization of the Isocyanide Ligated Centered Zirconium Halide Cluster [(Zr6Be)Cl12(CNXyl)6]

The first isocyanide ligated hexanuclear zirconium halide cluster is reported. The unoxidized [(Zr₆Be)Cl₁₂(CNXyl)₆] (CNXyl = 2,6-dimethylphenyl isocyanide) was obtained from the solid state precursor K₃Zr₆Cl₁₅Be by dissolution in CH₃CN in the presence of CNXyl. The CNXyl ligands occupy all the axial positions on the cluster. The compound was recrystallized from CH₂Cl₂ and Et₂O. [(Zr₆Be)Cl₁₂(CNXyl)₆].2CH₂Cl₂ crystallizes in the space group (#2) with a = 12.092(5) Å, b=12.728(5) Å, c = 14.102(8) Å, = 104.98(4)°, =107.11°, = 100.94°, V = 1919(2) ų, Z = l, R = 11.3% and R _W = 27.0%. For the bound isocyanide ligands, v _CN increases to 2140 cm^–1.     

Evolution of the interface and metal film morphology in the vapor deposition of Ti on hexadecanethiolate hydrocarbon monolayers on Au

The combination of in situ X-ray photoelectron spectroscopy, infrared reflection spectroscopy, atomic force microscopy, and time-of-flight secondary ion mass spectrometry are used to probe the nature of the evolving interface chemistry and metal morphology arising from Ti vapor deposition onto the surface of a CH(3)(CH(2))(15)S/Au{111} self-assembled monolayer (SAM) at ambient temperature. The results show that for a deposition rate of approximately 0.15 Ti atom.nm(-2).s(-1) a highly nonuniform Ti overlayer is produced via a process in which a large fraction of impinging Ti atoms do not stick to the bare SAM surface. The adsorbed atoms form isolated Ti clusters and react with CH(3) groups to form carbide products at the cluster-SAM interfaces. Further growth of Ti clusters appears to be concentrated at these scattered reaction centers. The SAM molecules in the local vicinity are subsequently degraded to inorganic products, progressing deeper into the monolayer as the deposition proceeds to give an inorganic/organic nanocomposite. A continuous overlayer does not form until metal coverage approaches approximately 50 Ti atoms per SAM molecule. These data indicate that for applications such as molecular device contacts the use of Ti may be highly problematic, suffering from both a highly nonuniform contact area and the presence of extensive inorganic products such as nonstoichiometric carbides and hydrides.