Electronic control of stereoselectivity. 20. Crystal and molecular structure of the ferrocene derived from tricyclo[5.2.1.02,6]Deca-2,5,8-triene

Reaction of the isodicyclopentadienide anion and its dehydro congener with Fe(II) leads to a stereochemically homogeneous ferrocene derivative in each instance. Through chemical correlation and X-ray analysis, above-plane complexation is established for both halves within the two sandwich compounds.     

The 4051-Angstroms band of C3 (A 1Piu-X 1Sigmag +, 000-000): perturbed low-J lines and lifetime measurements

Rotational analyses have been carried out at high resolution for the 000-000 and 000-100 bands of the A (1)Pi(u)-X (1)Sigma(g) (+) transition of supersonic jet-cooled C(3). Two different spectra have been recorded for each band, using time gatings of 20-150 and 800-2300 ns. At the shorter time delay the spectra show only the lines observed by many previous workers. At the longer time delay many extra lines appear, some of which have been observed previously by [McCall et al.Chem. Phys. Lett. 374, 583 (2003)] in cavity ring-down spectra of jet-cooled C(3). Detailed analysis of these extra lines shows that at least two long-lived states perturb the A (1)Pi(u), 000 state. One of these appears to be a (3)Sigma(u) (-) vibronic state, which may possibly be a high vibrational level of the b (3)Pi(g) state, and the other appears to be a P = 1 state with a low rotational constant B. Our spectra also confirm the reassignment by McCall et al. of the R(0) line of the 000-000 band, which is consistent with the spectra recorded towards a number of stars that indicate the presence of C(3) in the interstellar medium. Fluorescence lifetimes have been measured for a number of upper-state rotational levels. The rotational levels of the A (1)Pi(u) state have lifetimes in the range of 230-190 ns, decreasing slightly with J; the levels of the perturbing states have much longer lifetimes, with some of them showing biexponential decays. An improved value has been obtained for the nu(1) vibrational frequency of the ground state, nu(1) = 1224.4933 +/- 0.0029 cm(-1).     

A discrete method of optimal control based upon the cell state space concept

A discrete method of optimal control is proposed in this paper. The continuum state space of a system is discretized into a cell state space, and the cost function is discretized in a similar manner. Assuming intervalwise constant controls and using a finite set of admissible control levels (u) and a finite set of admissible time intervals (), the motion of the system under all possible interval controls (u, ) can then be expressed in terms of a family of cell-to-cell mappings. The proposed method extracts the optimal control results from these mappings by a systematic search, culminating in the construction of a discrete optimal control table.The possibility of expressing the optimal control results in the form of a control table seems to give this method a means to make systems real-time controllable.Dedicated to G. LeitmannThe material is based upon work supported by the National Science Foundation under Grant No. MEA-82-17471. The author is also indebted to Professor G. Leitmann for his many helpful comments.     

Some aspects of plasma polymerization investigated by pulsed R.F. discharge

The polymerization of organic compounds in glow discharge (plasma polymerization) was investigated by using pulsed R.F. discharge (100 μsec on, 900 μsec off). The effects of pulsed discharge on polymer deposition rate, pressure change in plasma, ESR signals of free spins in both plasma polymer and substrate, and the contact angle of water on the plasma polymer surface were investigated for various organic compounds. The results are correlated to the mechanisms of polymer formation in plasma (plasma polymerization) which has been postulated as repeating processes of stepwise (propagation) reactions. The effect of the pulse is different from one group of organic compounds to another depending on whether or not they contain an olefinic double bond and/or a triple bond. The main difference seems to be the addition polymerization which can occur exclusively during the off-period of pulsed discharge. Ultraviolet emission from pulsed discharge is much less than from continuous discharge. Consequently, the fragmentation of the monomer and the free-radical formation in the substrate are less with the pulsed discharge. Properties of polymers from some organic compounds formed in continuous and in pulsed discharge were found to be significantly different, and the differences were postulated from the changes of polymerization mechanisms in the pulsed discharge.     

Epoxy-based azo molecular glasses with four-arm architecture: Preparation,characterization and holographic recording

A series of epoxy-based azo molecular glasses with four-arm architecture was synthesized, characterized and applied to holographic recording.     

Determination of surface charge properties of PC-12 cells by electrophoresis

The electrophoretic behavior of pheochromocytoma (PC-12) cells was investigated both experimentally and theoretically. Cell mobility in aqueous media at different pHs and ionic concentrations was measured, and a model, which assumed that the cell surface contains both acidic and basic functional groups, was proposed. As a result, it was revealed that the experimental data gathered can be described satisfactorily by assuming that the cell surface contains two types of monovalent acidic functional groups and one basic functional group. The values of the dissociation constants of the acidic and basic groups are found to be close to those of acidic amino acids, which indicates that the acidic amino acids may play an important role in the surface electrical properties of PC-12 cells.     

Determination of isoniazid methanesulphonate and its metabolites in rabbit blood by high-performance liquid chromatography

A rapid and sensitive high-performance liquid chromatographic method is described for simultaneous determination of isoniazid methanesulphonate (IHMS) and its metabolites, such as isoniazid (INH) and acetylisoniazid (AcINH) in rabbit blood. According to stability studies, IHMS was most stable at pH 3-5. After acidifying the blood to pH 5.0, a suitable amount of acetonitrile was added to the supernatant for extraction and niacinamide served as an internal standard. After evaporation, the residue was reconstituted with phosphate buffer and aliquots of this solution were separated on a reversed-phase phenyl column by a mobile phase consisting of 0.25 mM tetrabutylammonium phosphate as a paired-ion reagent. UV detection was performed at 280 nm. Under these conditions, the between-run coefficients of variation of IHMS, INH and AcINH from 1 to 25 microns/ml were 4.7 +/- 2.5, 5.4 +/- 1.0 and 5.1 +/- 3.1%, respectively. Hence this sensitive, reproducible and accurate method was suitable for pharmacokinetic studies of IHMS.     

Synthesis of benzopyran derivatives,XV Preparation of arylsulfonyloxy-2,2-dimethyl-2H-chromenes

Summary Arylsulfonyloxy-2,2-dimethyl-2H-chromenes (26–35) have been synthesized by reduction of arylsulfonyloxy-2,2-dimethyl-4-chromanones (6–15) followed by dehydration.

---

Synthese von Benzopyranderviaten. 15. Mitt.: Darstellung von Arylsulfonyloxy-2,2-dimethyl-2H-chromenen

Zusammenfassung Reduktion von Arylsulfonyloxy-2,2-dimethyl-4-chromanonen (6–15) und anschließende Dehydratisierung liefert Arylsulfonyloxy-2,2-dimethyl-2H-chromene (26–35).

     

Dual behavior of masked o-benzoquinones in intramolecular Diels-Alder reactions. Expedient synthesis of highly functionalized cis-decalins from 2-methoxyphenols

[Reaction: see text]. The potential dual behavior as dienes and dienophiles of the diene moieties of masked o-benzoquinones (MOBs) 10a-e-12a-e, generated upon oxidation of 2-methoxyphenols 1-3 with BTIB in the presence of appropriate dienols, in their intramolecular Diels-Alder (IMDA) reactions has been examined. The IMDA reactions of MOBs 10a-d, 11a,b,d, and 12a,b,d resulted in highly functionalized oxatricyclic compounds 18a-d, 19a,b,d, and 20a,b,d, respectively, with concomitant formation of cis-decalin derivatives 21a-d, 22a,b,d, and 23a,b,d in a highly regio- and stereoselective manner. However, the MOBs 10e-12e provided exclusively oxatricyclic compounds 18e-20e. The formation of cis-decalins in these IMDA reactions illustrates the dienophilic character of MOBs, in addition to their behavior as dienes. The ratio of the two cycloadducts obtained in each reaction as a result of the dual character of MOBs depends on the nature and/or position of the substituents on both the cyclohexadienone moiety and the added 2,4-dienol. The majority of the cycloadducts resulted from the diene property of MOBs in intramolecular Diels-Alder reactions smoothly underwent Cope rearrangement to furnish cis-decalins as sole products in excellent to quantitative yields that provides a short and efficient entry to polyfunctionized cis-decalins from 2-methoxyphenols. Furthermore, the variation of dienophilic and diene characters of MOBs in the IMDA reactions with the electron-donating or electron-withdrawing substituent of both cyclohexadienone moiety and the added conjugated acyclic diene or 2,4-dienol has been studied in detail.     

Studies on the thermotropic liquid crystalline polymer. VII. Synthesis and properties of photocrosslinkable poly(ether-ester) containing cinnamic group

A series of semi-aromatic poly(ether-ester)s containing cinnamic group was prepared from 4,4′-diacrylic acid-α,ω-phenoxyalkanes with diols in the presence of diphenylchlorophosphate (DPCP) and pyridine as a catalyst and solvent. The phase behavior of these polymers was studied by differential scanning calorimetry (DSC), optical polarizing microscopy equipped with a heating stage, and wide-angle x-ray diffraction (WAXD). All of the poly(ether-ester)s, except P3 , show nematic or smectic thermotropic liquid crystalline behaviour under optical polarizing microscopic observation. These polymers can undergo photocrosslinking reaction upon heating, as examined by IR, solubility, and DSC analysis. © 1993 John Wiley & Sons, Inc.