Charge transport properties of tris(8-hydroxyquinolinato)aluminum(III): why it is an electron transporter

The charge transport properties of mer-tris(8-hydroxyquinolinato)aluminum(III) (mer-Alq), which is the most widely used electron transport material in OLED, were investigated by quantum chemistry calculations within the framework of the charge hopping model and Marcus electron transfer theory. Internal reorganization energies of 0.276 and 0.242 eV were calculated by the DFT-B3LYP method employing a 6-31 G* basis set for the electrons lambdai(e) and holes lambdai(h), respectively. The relative distances and orientations of Alq molecules in amorphous film were simulated by those in the beta-phase. The intermolecular charge-transfer integrals, Hda(h) and Hda(e), along all 14 hopping pathways were then calculated by the Koopmans Theorem in conjunction with the Hartree-Fock method employing a 6-31 G* basis set as well as by the direct coupling method. The results showed that there were some Hda(e) that were 1 order of magnitude larger than any Hda(h), because hopping pathways with effective overlaps of LUMOs can occur and, thus, large Hda(e). On the other hand, effective overlap of HOMO was absent in all pathways, resulting in a relatively small Hda(h). This difference in the magnitudes of Hda(e) and Hda(h) would predict a 2 orders of magnitude difference in the electron-transfer rate constants and account for the observed 2 orders of magnitude difference in the mobilities of electrons and holes.     

Charge stabilization in nonpolar solvents

While the important role of electrostatic interactions in aqueous colloidal suspensions is widely known and reasonably well-understood, their relevance to nonpolar suspensions remains mysterious. We measure the interaction potentials of colloidal particles in a nonpolar solvent with reverse micelles. We find surprisingly strong electrostatic interactions characterized by surface potentials, |ezeta|, from 2.0 to 4.4 k(B)T and screening lengths, kappa(-1), from 0.2 to 1.4 microm. Interactions depend on the concentration of reverse micelles and the degree of confinement. Furthermore, when the particles are weakly confined, the values of |ezeta| and kappa extracted from interaction measurements are consistent with bulk measurements of conductivity and electrophoretic mobility. A simple thermodynamic model, relating the structure of the micelles to the equilibrium ionic strength, is in good agreement with both conductivity and interaction measurements. Since dissociated ions are solubilized by reverse micelles, the entropic incentive to charge a particle surface is qualitatively changed from aqueous systems, and surface entropy plays an important role.     

Two-temperature dilute-acid prehydrolysis of hardwood xylan using a percolation process

This article outlines some of the factors influencing the choice of a suitable reactor for using immobilized biocatalysts. We have concentrated on biochemical engineering parameters of immobilized biocatalysts, which are important with respect to their application in industrial processes.     

Electric conductivity in a fibrous porous medium with thin but polarized double layers

The electric conduction in the fibrous medium constructed by a homogeneous array of parallel, identical, charged, circular cylinders having an arbitrary zeta potential filled with the solution of a symmetrically charged electrolyte is analytically examined. The thickness of the electric double layers surrounding the dielectric cylinders is assumed to be small relative to the radius of each cylinder and to the gap width between two neighboring cylinders, but the polarization of the mobile ions in the diffuse layers is allowed. The effect of interactions among individual cylinders is taken into explicit account by employing a unit cell model. The appropriate equations of conservation of electrochemical potential energies of ionic species are solved for each cell, in which a cylinder is envisaged to be surrounded by a coaxial cylindrical shell of the fluid solution. Analytical expressions for the effective electric conductivity are obtained in closed forms as functions of the porosity of the fiber matrix and other characteristics of the porous system. Comparisons of the results of the cell model with different conditions at the outer boundary of the cell are made. Under an otherwise identical condition, the electric conductivity in a porous medium composed of an array of parallel cylinders in the transverse direction is smaller than that of a suspension of spheres. The effect of interactions among the cylinders or spheres on the effective conductivity can be quite significant under appropriate conditions.     

Electrical interaction between two cylinders with an ion-penetrable charged membrane in an oil/water interface

The electrical interaction between two long, parallel cylinders each is covered by an ion-penetrable charged membrane immersed in an oil/water interface is investigated. The effects of contact angle, radius of cylinder, and membrane thickness on the electrical interaction force are examined. The results of numerical simulation reveal that the following conditions lead to a greater electrical interaction force: (i) a larger contact angle, i.e. a larger fraction of a cylinder in the oil phase; (ii) a larger cylinder radius; and (iii) a thinner membrane. For a fixed ionic strength, the electrical interaction force is insensible to the type of electrolytes in the water phase, in general. However, if two cylinders are close enough, then the higher the valence of counterions the greater the electrical interaction force.     

Determination of glutamate pyruvate transaminase activity in clinical specimens using a biosensor composed of immobilized l-glutamate oxidase in a photo-crosslinkable polymer membrane on a palladium-deposited screen-printed carbon electrode

The determination of glutamate pyruvate activity (GPT) is of particular clinical importance. A portable GPT sensor for both diagnostic and home-care purpose is highly expected. A highly sensitive and stable l-glutamate sensor was fabricated for the rapid detection of the GPT activity in serum. The sensor is composed of immobilized l-glutamate oxidase in a photo-crosslinkable polymer (PVA-SbQ) membrane on a palladium-deposited screen-printed carbon electrode. The sensor exhibited high sensitivity (detection limit of 50 nM for monosodium glutamate), remarkable long-term stability in storage (5 months in the dry dark state and 1 month in buffer solution) and good reproducibility (R.S.D.=2.6%, n=100). The electrode-to-electrode reproducibility was found to depend on the composition of the polymeric matrix. The optimal substrate composition for the detection of GPT activity was 1 mM α-ketoglutarate and 100 mM l-alanine. The GPT activity in serum can be determined within 3 min. The response of the sensor to GPT activity is linear over the range of 8-250 U/l. Good correlation between the sensor and the Sigma GPT assay kit was achieved (R²=0.9958). The sensor is potentially applicable to a home-care purpose when a portable measuring device is adapted.     

Efficient total synthesis of pulchellalactam,a CD45 protein tyrosine phosphatase inhibitor

A new approach to a CD45 protein tyrosine phosphatase inhibitor, pulchellalactam, is described. The key step of the sequence involves addition and elimination of an enolic lactam in a single step and 70% yield, employing an organocuprate reagent. The resulting alpha,beta-unsaturated lactam could be condensed with isobutyraldehyde to produce Z-pulchellalactam or converted into siloxypyrrole, which was subjected to the BF(3) x Et(2)O-promoted coupling reaction with isobutyraldehyde to afford E-pulchellalactam after E1-cB elimination and TFA deprotection. This first total synthesis afforded Z-pulchellalactam in six steps and 32% overall yield from Boc-glycine. The same sequence of reactions could also be applied to the liquid- or solid-phase synthesis of trifunctionalized pulchellalactam derivatives.     

Vertically well aligned P-doped ZnO nanowires synthesized on ZnO-Ga/glass templates

Vertically well aligned P-doped ZnO nanowires were prepared on ZnO-Ga/glass templates at 550 degrees C by reactive evaporation without metal catalysts and the nanowires were found to be single crystalline with the würtzite structure, oriented in the c-axis direction; the P-doping shortened the physical lengths of the ZnO nanowires without changing their diameter, and furthermore, the introduction of P atoms resulted in a much weaker and broader ZnO band edge emission.     

Chemoproteomic profiling of kinases in live cells using electrophilic sulfonyl triazole probes

Sulfonyl-triazoles are a new class of electrophiles that mediate covalent reaction with tyrosine residues on proteins through sulfur-triazole exchange (SuTEx) chemistry. Recent studies demonstrate the broad utility and tunability of SuTEx chemistry for chemical proteomics and protein ligand discovery. Here, we present a strategy for mapping protein interaction networks of structurally complex binding elements using functionalized SuTEx probes. We show that the triazole leaving group (LG) can serve as a releasable linker for embedding hydrophobic fragments to direct molecular recognition while permitting efficient proteome-wide identification of binding sites in live cells. We synthesized a series of SuTEx probes functionalized with a lipid kinase fragment binder for discovery of ligandable tyrosines residing in catalytic and regulatory domains of protein and metabolic kinases in live cells. We performed competition studies with kinase inhibitors and substrates to demonstrate that probe binding is occurring in an activity-dependent manner. Our functional studies led to discovery of probe-modified sites within the C2 domain that were important for downregulation of protein kinase C-alpha in response to phorbol ester activation. Our proof of concept studies highlight the triazole LG of SuTEx probes as a traceless linker for locating protein binding sites targeted by complex recognition elements in live cells.

Sulfonyl-triazole probes modified with a kinase recognition element are developed for live cell activity-based profiling to identify tyrosine sites located in catalytic and regulatory domains that are important for kinase function.     

A multi-residue cation-exchange clean up procedure for basic drugs in produce of animal origin

There is considerable interest in maximising the amount of information obtained from animal product analyses, when screening for the presence of veterinary drug residues. One of the barriers to effective multi-residue analysis to date has been a lack of effective clean up procedures to isolate a wide range of residues from the potential interferents, which may be present in both simple and complex (including processed) foods. A cation-exchange clean up has, therefore, been developed for use with acetonitrile extracts of foods, when analysing for several basic drug groups (sulfonamides, benzimidazoles, levamisole, nitroimidazoles, tranquillisers and fluroquinolones). The clean up procedure has also been shown to be effective using a modified extraction solvent for malachite green and leucomalachite green in fish.Several of the key parameters that influence analyte recovery have been investigated and in an optimised procedure, tissue/biofluid samples containing sulfonamides, benzimidazoles, levamisole, nitroimidazoles, tranquillisers and fluoroquinolones are first extracted with acetonitrile. The extract is then dried with sodium sulfate and acidified with glacial acetic acid before loading onto a Bond Elut, strong cation-exchange (SCX) solid phase extraction (SPE) cartridge. Extracts from fish containing malachite green and leucomalachite green can be cleaned up using the same SCX SPE procedure following extraction with citrate buffer/acetonitrile. Typical recoveries of drugs from low level fortified tissues using the optimised procedure lie in the range 53-104% with the exception of carazolol from pig kidney (31%), malachite green from trout (42-51%) and ciprofloxacin from chicken muscle (44%) and from egg (21%).