Preparation and reactions of the (dicarbonyl)(η5-cyclopentadienyl)(tetrahydrofuran)iron cation: A convenient route to (dicarbonyl)(η5-cyclopentadiemyl)(η2-olefin)iron cations and related complexes

The versatile reagent [η⁵-C₅H₅)Fe(CO)₂(THF)]BF₄ has been isolated from the reaction of (η₅-C₅H₅)Fe(CO)₂I and AgBF₄ in THF and shown to react in CH₂Cl₂ with olefins to yield [(η⁵-C₅H₅)Fe(CO)₂(η²-olefin)]BF₄ complexes. For most olefins the yields are high. The yield in these reactions can be increased by treating the CH₂Cl₂ solution of [(η⁵-C₅H₅)Fe(Co)₂(THF)]BF₄ and olefin with gaseous BF₃ in order to complex the THF as the BF₃-THF adduct. Most striking is the increase in yield for the cyclohexene complex from 17% to 92%.     

Research on a number of substituted arylamides of dithiocarboxylic acids

Dithiomalonic acid diarylamldes are cyclized to 3,5-diarylamino-1,2-dithiolium halides by oxidation with an equivalent amount of bromine (iodine) in chloroform solution; the same amides are cyclized to 4-bromo-3,5-diarylamino-1,2-dithiolium bromides with excess bromine and to 3-arylamino-5-arylimino-1,2-dithiols in alkaline media with potassium ferricyanide. The behavior of the synthesized substituted 1,2-dithiols with respect to various reagents was studied.     

On the chromophore of polyacrylonitrile

Further evidence is presented to show that the chromophore of polyacrylonitrile is formed by polymerization of the nitrile groups, rather than by dehydrogenation of the polymer backbone. The polyimine structure formed is resistant to hydrolysis; hence, the nitrogen content of hydrolyzed polymer increases with increased chromophore formation.     

Selektivierung geringer Mengen Kupfer mit Polyäthylenimin-Zellulose

Zusammenfassung Polyäthyleniminzellulosen sorbieren Cu²⁺ durch koordinative Bindung als Zentralion des sekundären Stickstoffs des Polyäthylenimins im P_H-Bereich 3,5 bis 4,5 selektiv aus verd. Lösungen. 10g Kupfer können von 10⁵fachen Überschüssen anderer Übergangsmetalle separiert, mit verd. Salzsäure eluiert und mit Diäthyldithiocarbamat photometrisch bestimmt werden. Das Verfahren eignet sich zur Erfassung von 0,001% Kupfer in Zink, Mangan, Kobalt, Nickel, Cadmium und Aluminium sowie aus Lösungen, deren Kupfergehalt 0,02 ppm beträgt.

---

Selectivation of small amounts of copper with polyethyleneimine-cellulose

Summary Polyethyleneimine celluloses selectively sorb Cu²⁺ from dilute solutions through coordinative bonding as central ion of the secondary nitrogen of polyethyleneimine in the p_H-range of 3.5–4.5. 10g of copper may be separated from 10₅-fold excesses of other transition metals, then eluted with dilute hydrochloric acid and determined photometrically with diethyldithiocarbamate. The method is suitable for determining 0.001% copper in zinc, manganese, cobalt, nickel, cadmium, and aluminium as well as in solutions whose coppercontent is 0.02 ppm.

     

On the symmetry of iron(III) tris-acetylacetonate crystals

The crystal structure of iron tris-acetylacetonate is re-determined. Crystal data at 293 K are: a = 15.4524(5) Å, b = 13.5876(4) Å, c = 16.5729(7) Å, Z = 8; at 150 K: a = 15.2541(4) Å, b = 13.4451(3) Å, c = 16.4256(5) Å, Z = 8. The structure is molecular and comprises isolated molecules. The coordination polyhderon of iron is an almost regular octahedron, Fe-O bond lengths are 1.977–2.003 Å (293 K) and 1.982–2.006 Å (150 K). In the crystalline state, the molecules are arranged in layers, and iron atoms are located on a plane yielding an almost regular trigonal net with the Fe...Fe separations of 7.558–8.103 Å (293 K) and 7.472–8.017 Å (150 K). The adjacent layer is positioned exactly over the first one with a Fe...Fe distance of 8.303 Å (293 K) and 8.236 Å (150 K).     

Determination of panaxadiol and panaxatriol in ginseng and its preparations by capillary supercritical fluid chromatography (SFC).

Capillary supercritical fluid chromatographic (SFC) method has been developed for the determination of panaxadiol and panaxatriol in ginseng and its preparations. 0.1 g ginseng or an appropriate amount of its preparations was hydrolysed by 15% H2SO4 in an ethanol:water (1:1 v/v) solution for 4 h followed by 15% NaOH for 0.5 h. The mixture was extracted by cyclohexane. The cyclohexane extracts were purified by a partition column and concentrated by an adsorption column and then analysed by SFC. Methyltestosterone was used as the internal standard.     

Peak distortion in the column liquid chromatographic determination of omeprazole dissolved in borax buffer.

Injection of a sample containing omeprazole dissolved in borax buffer (pH 9.2) into a reversed-phase liquid chromatographic system consisting of a mixture of acetonitrile and phosphate buffer (pH 7.6) as the mobile phase and a C18 surface-modified silica as the solid phase resulted under special conditions in split peaks of omeprazole. The degree of peak split and the retention time of omeprazole varied with the concentration of borax in the sample solution and the ionic strength of the mobile phase buffer as well as with the column used. Borax is eluted from the column in a broad zone starting from the void volume of the column. The retention is probably due to the presence of polyborate ions. The size of the zone varies with the concentration of borax in the sample injected. In the borax zone the pH is increased compared with the pH of the mobile phase, and when omeprazole (a weak acid) is co-eluting in the borax zone its retention is affected. In the front part and in the back part of the borax zone, pH gradients are formed, and these gradients can induce the peak splitting. When the dissolving medium is changed to a phosphate buffer or an ammonium buffer at pH 9 no peak distortion of omeprazole is observed.     

Rapid determination of PAHs in soil samples by HPLC with fluorimetric detection following sonication extraction

A rapid method for the determination of PAHs in soil samples based on their extraction with methylene chloride by sonication and subsequent separation by HPLC with fluorimetric detection is proposed. A Hypersil Green PAH column was used with a gradient of acetonitrile/water as the mobile phase, together with a program of nine excitation and emission wavelength pairs. Recoveries were in the range 70-98%, except for acenaphthene and naphthalene, at concentration levels 1.08-442 microg/kg with relative standard deviations in the range 2-15% (n = 4). Total PAHs found in soil samples were in the range 15-282 microg/kg. The results were compared with those obtained by applying the 3540 EPA method for two samples.     

A method for experimental determination of effective resonance energies related to (n, γ) reactions

When making use of some single comparator or absolute standardization methods in reactor neutron and in epicadmium neutron activation analysis, the knowledge of the effective resonance energy ( ) is essential to correct for the effect of the nonideal epithermal flux distribution on the analysis result. can be calculated from neutron resonance data, but when these are incomplete, not accurate or even not known at all, experimental determination should be considered. Such a method, providing both and the resonance integral to 2200 ms^–1 cross-section ratio (Q_O), is described in this paper. Results are given for 11 isotopes.     

Systematic calculation of detection limits in INAA of single element matrices with a SLOWPOKE reactor

A computer code using a simple model for the simulation of γ-ray spectra has been written to evaluate detection limits in INAA of single-element matrices. The data base includes cross-sections for the (n, γ), (n, p) and (n, α) reactions that contribute to the activity of samples irradiated in the inner irradiation sites of a SLOWPOKE reactor. The values of the detection limits of 63 elements in 60 matrices are presented in a tabular form. Up to 4 radioisotopes per element were considered for a total of 114 radioisotopes. The program also lists the set of experimental conditions, selected from 7 sets which cover the range of practically used values of irradiation, decay and counting time, which yields for each radioisotope the lowest limit of detection. It also indicates, via a reduction factor, the maximum allowable sample size.