Artificial metalloenzymes for enantioselective catalysis based on biotin-avidin

Homogeneous and enzymatic catalysis offer complementary means to generate enantiomerically pure compounds. Incorporation of achiral biotinylated rhodium-diphosphine complexes into (strept)avidin yields artificial metalloenzymes for the hydrogenation of N-protected dehydroamino acids. A chemogenetic optimization procedure allows one to produce (R)-acetamidoalanine with 96% enantioselectivity. These hybrid catalysts display features reminiscent both of enzymatic and of homogeneous systems.     

Modeling anhydrous and aqua copper(II) amino acid complexes: a new molecular mechanics force field parametrization based on quantum chemical studies and experimental crystal data

This paper presents the vacuum structures of aquacopper(II) bis(amino acid) complexes with glycine, sarcosine, N,N-dimethylglycine, and N-tert-butyl-N-methylglycine estimated using the B3LYP method. The differences between the B3LYP vacuum structures and experimental crystal structures suggested considerable influence of crystal lattice packing effects on the changes in the complexes' geometries. A previously developed molecular mechanics force field for modeling anhydrous copper(II) amino acidates was reoptimized to simulate these changes and predict the properties of both trans and cis anhydrous and aqua copper(II) amino acid complexes. The modeling included experimental molecular and crystal structures of 13 anhydrous and 10 aqua copper(II) amino acidates with the same atom types (Cu(II), C, H, N, and O) but various copper(II) coordination polyhedron geometries, crystal symmetries, and intermolecular interactions. The empirical parameters of the selected potential energy functions were optimized on the B3LYP vacuum copper(II) coordination geometries of three anhydrous copper(II) amino acidates and on experimental crystalline internal coordinates and unit cell dimensions of six anhydrous and six aqua copper(II) amino acid complexes. The respective equilibrium structures were calculated in vacuo and in simulated crystalline environment. The efficacy of the final force field, FFW, was examined. The total root-mean-square deviations between the experimental and theoretical crystal values were 0.018 A in the bond lengths, 2.2 degrees in the valence angles, 5.5 degrees in the torsion angles, and 0.395 A in the unit cell lengths. FFW reproduced the unit cell volumes in the range from -8.1 to 9.6%. The means of Cu to axial water oxygen distances were 2.4 +/- 0.1 A (experiment) and 2.6 +/- 0.1 A (FFW). This paper describes the ability of the molecular mechanics model and FFW force field to simulate the flexibility of the metal coordination polyhedron. The new force field proved effective in predicting the most stable molecular conformation of copper(II) amino acidato systems in vacuo.     

Trioxatriangulenium (TOTA+) as a robust carbon-based Lewis acid in frustrated Lewis pair chemistry

We report the reactivity between the water stable Lewis acidic trioxatriangulenium ion (TOTA⁺) and a series of Lewis bases such as phosphines and N-heterocyclic carbene (NHC). The nature of the Lewis acid–base interaction was analyzed via variable temperature (VT) NMR spectroscopy, single-crystal X-ray diffraction, UV-visible spectroscopy, and DFT calculations. While small and strongly nucleophilic phosphines, such as PMe₃, led to the formation of a Lewis acid–base adduct, frustrated Lewis pairs (FLPs) were observed for sterically hindered bases such as P(^tBu)₃. The TOTA⁺–P(^tBu)₃ FLP was characterized as an encounter complex, and found to promote the heterolytic cleavage of disulfide bonds, formaldehyde fixation, dehydrogenation of 1,4-cyclohexadiene, heterolytic cleavage of the C–Br bonds, and interception of Staudinger reaction intermediates. Moreover, TOTA⁺ and NHC were found to first undergo single-electron transfer (SET) to form [TOTA]·[NHC]˙⁺, which was confirmed via electron paramagnetic resonance (EPR) spectroscopy, and subsequently form a [TOTA–NHC]⁺ adduct or a mixture of products depending the reaction conditions used.

Frustration at carbon! Herein, we present a frustrated Lewis pair system derived from a water stable carbon-based Lewis acid, trioxatriangulene (TOTA⁺), and a variety of Lewis bases, which successfully promotes bond cleavage and molecule fixation.     

NON-NUCLEAR DAMAGE AND CELL LYSIS ARE INDUCED BY UVA, BUT NOT UVB OR UVC, RADIATION IN THREE STRAINS OF L5178Y CELLS

The potential to induce non-nuclear changes in mammalian cells has been examined for (1) UVA1 radiation (340–400 nm, UVASUN 2000 lamp), (2) UVA + UVB (peak at 313 nm) radiation (FS20 lamp), and (3) UVC (254 nm) radiation (GI5T8 lamp). The effects of irradiation were monitored in vitro using three strains of L5178Y (LY) mouse lymphoma cells that markedly differ in sensitivity to UV radiation. Comparisons were made for the effects of approximately equitoxic fluences that reduced cell survival to 1–15%. Depending on the cell strain, the fluences ranged from 830 to 1600 kJ/m² for the UVASUN lamp, 75 to 390 J/m² for the FS20 lamp and 3.8 to 17.2 J/m² for the G15T8 lamp. At the exposure level used in this study, irradiation with the UVASUN, but not the FS20 or G15T8, lamp induced a variety of non-nuclear changes including damage to cytoplasmic organelles and increased plasma membrane permeability and cell lysis. Cell lysis and membrane permeabilization were induced by the UVA1 emission of the UVASUN lamp, but not by its visible + IR components (>400 nm). The results show that the plasma membrane and other organelles of LY cells are highly sensitive to UVA1 but not to UVB or UVC radiation. Also UVA1, but not UVB or UVC radiation, causes rapid and extensive lysis of LY cells. In conclusion, non-nuclear damage contributes substantially to UVA cytotoxicity in all three strains of LY cells.     

Improving splitless injection with electronic pressure programming

An experimental injection port has been designed for split or splitless sample introduction in capillary gas chromatography; the inlet uses electronic pressure control, in order that the column head pressure may be set from the GC keyboard, and the inlet may be used in the constant flow or constant pressure modes. Alternatively, the column head pressure may be programmed up or down during a GC run in a manner analogous to even temperature programming. Using electronic pressure control, a method was developed which used high column head pressures (high column flow rates) at the time of injection, followed by rapid reduction of the pressure to that required for optimum GC separation. In this way, high flow rates could be used at the time of splitless injection to reduce sample discrimination, while lower flow rates could be used for the separation. Using this method, up to 5 μl of a test sample could be injected in the splitless mode with no discrimination; in another experiment, 2.3 times as much sample was introduced into the column by using electronic pressure programming. Some GC peak broadening was observed in the first experiment.     

A hydrogen-1, nitrogen-15, and chlorine-35 NMR coordination study of Lu(ClO4)3 and Lu(NO3)3 in aqueous solvent mixtures

A coordination study of Lu(III) has been carried out for the nitrate and perchlorate salts in aqueous mixtures of acetone-d₆ and Freon-12 by¹H,¹⁵N and³⁵Cl NMR spectroscopy. At temperatures lower than –90°C, proton and ligand exchange are slow enough to permit the direct observation of¹H resonance signals for coordinated and free water molecules, leading to an accurate measure of the Lu(III) hydration number. In perchlorate solution, in the absence of inner-shell ion-pairing, Lu(III) exhibits a maximum coordination number of six over the allowable concentration range of study, contrasting markedly with the report of values of six to nine or greater as determined by a similar NMR method. The absence of contact ion-pairing was confirmed by³⁵Cl NMR chemical shift and linewidth measurements. Extensive ion-pairing was observed in the nitrate solutions as reflected by the lower Lu(III) hydration numbers of two to three in these systems, the observation of two coordinated water signals, and¹⁵N NMR signals for two complexes. The¹H and¹⁵N NMR spectra and the hydration number could be accounted for by the presence of (H₂O)₄Lu(NO₃)²⁺ and (H₂O)₂Lu(NO₃) ₂ ¹⁺ .     

Formation of polyelectrolyte multilayer architectures with embedded DMPC studied in situ by neutron reflectometry

The coupling of lipid molecules to polymer components in a planar biomimetic model membrane made of a lipid bilayer (dimyristoylphosphatidylcholine) supported by polyelectrolyte multilayers is studied. The polyelectrolyte support was prepared by layer-by-layer deposition of positively charged poly(allylamine hydrochloride) (PAH) and negatively charged poly(sodium 4-styrenesulfonate) (PSS). Two polymer sample terminations were considered: positively charged (PAH-terminated) and negatively charged (PSS-terminated). Neutron reflectometry studies showed that, whereas positively charged samples did not favor the deposition of lipid, negatively charged samples allowed the deposition of a lipid bilayer with a thickness of approximately 5 nm. In the latter case, formation of polyelectrolyte layers after the deposition of the lipid layer was also possible.     

La3Os2O10, a new compound containing isolated clusters Os2O10 with metal-metal bonds

The formula of a new compound isolated in the LaOsO system has been established by means of crystal structure determination. There are two La₃Os₂O₁₀ units in a face-centered monoclinic unit cell (S.G. $\text{C2}\text{m}$); a = 7.911(2) Å, b = 7.963(2) Å, c = 6.966(2)Å, β = 115.76(2)°;. For 1082 intensities, collected on an automated single-crystal diffractometer, the final R value was 0.025 after absorption corrections. The structure consists of isolated Os₂O₁₀ clusters composed of two edge-shared OsO₆ octahedra. These dimeric units are connected together by two types of La³⁺ ions in eightfold coordination. In view of the OsOs distance inside the pair (2.462 Å), La₃Os₂O₁₀ provides an example of metal-metal bonding involving a transition metal in a half-integral formal oxidation state of 5.5.     

Crystal engineering of urea alpha-network via I...O2N synthon and design of SHG active crystal N-4-iodophenyl-N'-4'-nitrophenylurea

Crystalline nitrodiphenyl ureas adopt the N-H...O tape alpha-network only when stabilization accrues from the I...O(2)N or C[triple bond]C-H...O(2)N synthon, otherwise the ureanitro motif is preferred; soft, weak interactions can direct polar self-assembly in strong N-HO hydrogen-bonded crystals.