Modeling the deformation behavior of nanocrystalline alloy with hierarchical microstructures

A mechanism-based plasticity model based on dislocation theory is developed to describe the mechanical behavior of the hierarchical nanocrystalline alloys. The stress–strain relationship is derived by invoking the impeding effect of the intra-granular solute clusters and the inter-granular nanostructures on the dislocation movements along the sliding path. We found that the interaction between dislocations and the hierarchical microstructures contributes to the strain hardening property and greatly influence the ductility of nanocrystalline metals. The analysis indicates that the proposed model can successfully describe the enhanced strength of the nanocrystalline hierarchical alloy. Moreover, the strain hardening rate is sensitive to the volume fraction of the hierarchical microstructures. The present model provides a new perspective to design the microstructures for optimizing the mechanical properties in nanostructural metals.     

Synthesis and characterization of nanostructured iron compounds prepared from the decomposition of iron pentacarbonyl dispersed into carbon materials with varying porosities

This work describes the production and characterization of carbon-iron nanocomposites obtained from the decomposition of iron pentacarbonyl (Fe(CO)₅) mixed with different carbon materials: a high surface area activated carbon (AC), powdered graphite (G), milled graphite (MG), and carbon black (CB). The nanocomposites were prepared either under argon or in ambient atmosphere, with a fixed ratio of Fe(CO)₅ (4.0 mL) to carbon precursor (2.0 g). The images of scanning electron microscopy and the analysis of textural properties indicated the presence of nanostructured Fe compounds homogeneously dispersed into the different classes of pores of the carbon matrices. The elemental Fe content was always larger for samples prepared in ambient atmosphere, reaching values in the range of 20–32 wt%. On the other hand, samples prepared under argon showed reduced Fe content, with values in the range 5–10 wt% for samples prepared from precursors with low surface area (G, MG, and CB) and a much higher value (~19 wt%) for samples prepared from the precursor of high surface area (AC). Mössbauer spectroscopy and X-ray diffractometry showed that the nanoparticles were mostly composed of iron oxides in the case of the samples prepared in oxygen-rich ambient atmosphere and also for the AC-derived nanocomposite prepared under argon, which is consistent with the large oxygen content of this precursor. For the other precursors, with reduced or no oxygen content, metallic iron and iron carbides were found to be the dominant phases in samples prepared under oxygen-free atmosphere. The samples prepared in ambient atmosphere and the AC-derived sample prepared under argon exhibited superparamagnetic behavior at room temperature, as revealed by temperature-dependent magnetization curves and Mössbauer spectroscopy.     

Automated determination of size and morphology information from soot transmission electron microscope (TEM)-generated images

The thermophoretic sampling of particulates from hot media, coupled with transmission electron microscope (TEM) imaging, is a combined approach that is widely used to derive morphological information. The identification and the measurement of the particulates, however, can be complex when the TEM images are of low contrast, noisy, and have non-uniform background signal level. The image processing method can also be challenging and time consuming, when the samples collected have large variability in shape and size, or have some degree of overlapping. In this work, a three-stage image processing sequence is presented to facilitate time-efficient automated identification and measurement of particulates from the TEM grids. The proposed processing sequence is first applied to soot samples that were thermophoretically sampled from a laminar non-premixed ethylene-air flame. The parameter values that are required to be set to facilitate the automated process are identified, and sensitivity of the results to these parameters is assessed. The same analysis process is also applied to soot samples that were acquired from an externally irradiated laminar non-premixed ethylene-air flame, which have different geometrical characteristics, to assess the morphological dependence of the proposed image processing sequence. Using the optimized parameter values, statistical assessments of the automated results reveal that the largest discrepancies that are associated with the estimated values of primary particle diameter, fractal dimension, and prefactor values of the aggregates for the tested cases, are approximately 3, 1, and 10 %, respectively, when compared with the manual measurements.     

Synthesis of multi-walled carbon nanotubes for NH3 gas detection

It has been recently demonstrated that carbon nanotubes (CNTs) represent a new type of chemical sensor capable of detecting a small concentration of molecules such as CO, NO₂, NH₃.In this work, CNTs were synthesized by chemical vapor deposition (CVD) on the SiO₂/Si substrate by decomposition of acetylene (C₂H₂) on sputtered Ni catalyst nanoparticles. Their structural properties are studied by atomic force microscopy, high-resolution scanning electron microscopy (HRSEM) and Raman spectroscopy. The CNTs grown at 700 °C exhibit a low dispersion in size, are about 1 μm long and their average diameter varies in the range 25–60 nm as a function of the deposition time. We have shown that their diameter can be reduced either by annealing in oxygen environment or by growing at lower temperature (less than 600 °C).We developed a test device with interdigital Pt electrodes on an Al₂O₃ substrate in order to evaluate the CNTs-based gas sensor capabilities. We performed room temperature current–voltage measurements for various gas concentrations. The CNT films are found to exhibit a fast response and a high sensitivity to NH₃ gas.     

Characterization of electrical charge separation at the interface of two aqueous solutions in the presence of concentration gradients and cation/anion mobility ratio asymmetry

Physical consequences of ionic diffusion processes play a major role on the outcome of electrophysiology experiments due to both their contribution to the ionic transmembrane transport and phenomena taking place at the measuring instruments interface. As most of the time heterogenities in biological media with respect to ionic diffusion constants are disregarded, we intended to look upon the general case of ionic diffusion at the interface of two liquids on which gradients of these diffusion constants no longer can be neglected. We developed a theoretical model for the diffusion potential which emerges at an aqueous interface under gradients of concentration and diffusion constants. The experimental validation of our model was achieved through potential difference measurements of the diffusion potential between two solutions containing sodium chloride (NaCl) and glycerine solutions of various concentrations. Within the studied domain of the electrical charge mobility ratio, we noticed that experimental results are in agreement with the theoretically inferred diffusion potential values. This demonstrates that the resulting relationship for the diffusion potential inferred from our model could be applied for other cases, as well. When the ionic solutions contains an indefinite quantity of glycerine or an unknown substance able to modify diffusion constants of sodium and chloride, it was shown that through measurements of the diffusion potential one can infer the unknown concentration of glycerine and the modified ionic mobility ratio. This, in turn, builds up the foundation for a novel yet simple and efficient analitycal sensing device for quantitative determination in the field.     

Resonantly enhanced off-specular X-ray scattering from polymer/polymer interfaces<Superscript>⋆</Superscript>

We have used measurements of the absolute intensity of diffuse X-ray scattering to extract the interfacial tension of a buried polymer/polymer interface. Diffuse scattering was excited by an X-ray standing wave whose phase was adjusted to have a high intensity at the polymer/polymer interface and simultaneously a node at the polymer/air interface. This method permits the capillary-wave-induced roughness of the interface, and hence the interfacial tension, to be measured independently of the polymer/polymer interdiffusion.     

The real solution to scalar field equation in 5D black string space

After the nontrivial quantum parameters Ω _n and quantum potentials V _n obtained in our previous research, the circumstance of a real scalar wave in the bulk is studied with the similar method of Brevik and Simonsen (Gen. Rel. Grav. 33:1839, 2001). The equation of a massless scalar field is solved numerically under the boundary conditions near the inner horizon r _e and the outer horizon r _c . Unlike the usual wave function Ψ_ωl in 4D, quantum number n introduces a new functions Ψ_{ωl n} , whose potentials are higher and wider with bigger n. Using the tangent approximation, a full boundary value problem about the Schrödinger-like equation is solved. With a convenient replacement of the 5D continuous potential by square barrier, the reflection and transmission coefficients are obtained. If extra dimension does exist and is visible at the neighborhood of black holes, the unique wave function Ψ_{ωl n} may say something to it.