Synthesis and characterization of cellulose acetate from cellophane industry residues. Application as acetaminophen controlled-release membranes

Journal of Thermal Analysis and Calorimetry - Cellophane film production generates cellulosic residues from scraps, edges, and low-quality films. In this work, cellophane was used as a raw material...     

Assessment of pharmacokinetic interaction between piracetam and l‐carnitine in healthy subjects

A rapid, sensitive and specific method for quantifying piracetam in human plasma using Piracetam d‐8 as the internal standard (IS) is described. The analyte and the IS were extracted from plasma by one‐step precipitation of protein using an acetonitrile (100%). The extracts were analyzed by high‐performance liquid chromatography coupled with electrospray tandem mass spectrometry (HPLC‐MS/MS). The method had a chromatographic run time of 3.8 min and a linear calibration curve over the range 0.5–50 µg/mL (r > 0.99). This LC‐MS‐MS procedure was used to assess the bioavailability of two piracetam formulations: piracetam + l‐carnitine (Piracar®; 270/330 mg tablet) and piracetam (Nootropil®; 800 mg tablet) in healthy volunteers of both sexes. The geometric means with corresponding 90% confidence interval (CI) for test/reference percentage ratios were 88.49% (90% CI = 81.19 – 96.46) for peak concentration/dose and 102.55% (90% CI = 100.62 – 104.51) for AUC_inf/dose. The limit of quantitation of 0.5 µg/mL is well suited for pharmacokinetic studies in healthy volunteers. It was concluded that piracetam (Piracar®; 270/330 mg tablet) has a bioavailability equivalent to the piracetam (Nootropil®; 800 mg tablet) formulation with regard to both the rate and the extent of absorption. Copyright © 2015 John Wiley & Sons, Ltd.     

Affinity Matrices of Cratylia mollis Seed Lectins for Isolation of Glycoproteins from Complex Protein Mixtures

This work reports the use of matrices containing Cratylia mollis lectins (Cramoll 1,2,3-Sepharose and Cramoll 3-Sepharose) for isolation of glycoproteins from fetal bovine serum, human colostrum, hen egg white, and human blood plasma. Cramoll 1,2,3-Sepharose was able to bind a glycoprotein from fetal bovine serum which showed the same fetuin electrophoretic profile. The data indicate that this protein adsorbed to the matrix by interaction with Cramoll 3. Cramoll 1,2,3-Sepharose was not efficient to retain glycoproteins from human colostrum or commercial ovalbumin. Cramoll 3-Sepharose bound ovalbumin, and the support retained protein from hen egg white. Protein peaks eluted from the column with 1.0 M NaCl or 0.3 M galactose showed apparent molecular mass of ovalbumin. Two main proteins from blood plasma with apparent molecular mass 67 (similar to albumin) and 50 kDa (similar to fetuin) adsorbed on Cramoll 3-Sepharose and were eluted with 1.0 M NaCl as a single peak. Elution of adsorbed plasma proteins with 0.3 M galactose was less selective than with 1.0 M NaCl as revealed by SDS-PAGE. In conclusion, the Cramoll 1,2,3-Sepharose and Cramoll 3-Sepharose matrices were useful to separate glycoproteins from complex protein mixtures, and the adsorption phenomena was a carbohydrate-dependent event.     

Novel Amphiphilic Block Copolymers for the Formation of Stimuli-Responsive Non-Lamellar Lipid Nanoparticles

Non-lamellar lyotropic liquid crystalline (LLC) lipid nanoparticles contain internal multidimensional nanostructures such as the inverse bicontinuous cubic and the inverse hexagonal mesophases, which can respond to external stimuli and have the potential of controlling drug release. To date, the internal LLC mesophase responsiveness of these lipid nanoparticles is largely achieved by adding ionizable small molecules to the parent lipid such as monoolein (MO), the mixture of which is then dispersed into nanoparticle suspensions by commercially available poly(ethylene oxide)–poly(propylene oxide) block copolymers. In this study, the Reversible Addition-Fragmentation chain Transfer (RAFT) technique was used to synthesize a series of novel amphiphilic block copolymers (ABCs) containing a hydrophilic poly(ethylene glycol) (PEG) block, a hydrophobic block and one or two responsive blocks, i.e., poly(4-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)benzyl acrylate) (PTBA) and/or poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA). High throughput small angle X-ray scattering studies demonstrated that the synthesized ABCs could simultaneously stabilize a range of LLC MO nanoparticles (vesicles, cubosomes, hexosomes, inverse micelles) and provide internal particle nanostructure responsiveness to changes of hydrogen peroxide (H₂O₂) concentrations, pH and temperature. It was found that the novel functional ABCs can substitute for the commercial polymer stabilizer and the ionizable additive in the formation of next generation non-lamellar lipid nanoparticles. These novel formulations have the potential to control drug release in the tumor microenvironment with endogenous H₂O₂ and acidic pH conditions.     

Development of a Simple and Fast Electrochemical Method for Screening and Stoichiometric Determination of Dimenhydrinate

Dimenhydrinate (DIM) is a salt composed by the combination of two active pharmaceutical ingredients: diphenhydramine (DIP) and 8‐chlorotheophylline (CTP). In this work, the use of batch injection analysis with multiple pulse amperometric detection (BIA‐MPA) was proposed for the first time for fast stoichiometric determination of DIM. DIP (cation) and CTP (anion) were determined simultaneously in pharmaceutical samples with a simple and fast injection procedure (70 injections h^?1). Additional strategies were also proposed for rapid screening of samples containing the DIM salt. By a simple injection of a sample into the BIA system (without using of calibration curve), reliable information about stoichiometry of the DIM salt (1 : 1; DIP:CTP) and presence or absence of interfering species (electroactive) can be achieved.     

Sensitive determination of nitric oxide using an electrochemical sensor based on MWCNTs decorated with spherical Au nanoparticles

This paper describes the synthesis, characterisation and application of a very sensitive electrochemical sensor based on a glassy carbon electrode modified with multiwalled carbon nanotubes (MWCNTs) decorated with homogeneously distributed spherical gold nanoparticles (AuNPs). These AuNPs presented diameters ranging from 2 to 10 nm. The AuNPs were prepared directly on the MWCNTs’ surface via a synthesis using HAuCl₄ and citric acid as the reducing agent. The resulting material (Au/MWCNTs) was characterised by scanning electron microscopy (SEM), energy-dispersive X-ray spectrometry (EDX), high-resolution transmission electron microscopy (HRTEM), X-ray diffraction (XRD) and Raman spectroscopy. The developed Au/MWCNTs sensor was used in the determination of nitric oxide (NO) in phosphate buffer solution at pH 4.4 by differential pulse voltammetry. In the potential window between 0.5 and 0.65 V, a well-defined oxidation peak was observed, whose height was proportional to the NO concentration in the solution. The Au/MWCNTs-modified electrode exhibited high sensitivity for the determination of nitric oxide, with the limit of detection being 0.21 nmol L^?1 (S/N?=?3). No significant interference was detected for nitrite and CO₂ in the NO detection. Our study demonstrated that the resultant Au/MWCNT-modified electrode can be used for nitric oxide detection in the presence of ascorbic acid, dopamine and uric acid, being potentially useful for determinations of NO in real samples. Figure

?     

Synthesis of New Chlorin e6 Trimethyl and Protoporphyrin IX Dimethyl Ester Derivatives and Their Photophysical and Electrochemical Characterizations

In view of increasing demands for efficient photosensitizers for photodynamic therapy (PDT), we herein report the synthesis and photophysical characterizations of new chlorin e₆ trimethyl ester and protoporphyrin IX dimethyl ester dyads as free bases and Zn^II complexes. The synthesis of these molecules linked at the β‐pyrrolic positions to pyrano[3,2‐c]coumarin, pyrano[3,2‐c]quinolinone, and pyrano[3,2‐c]naphthoquinone moieties was performed by using the domino Knoevenagel hetero Diels–Alder reaction. The α‐methylenechromanes, α‐methylenequinoline, and ortho‐quinone methides were generated in situ from a Knoevenagel reaction of 4‐hydroxycoumarin, 4‐hydroxy‐6‐methylcoumarin, 4‐hydroxy‐N‐methylquinolinone, and 2‐hydroxy‐1,4‐naphthoquinone, respectively, with paraformaldehyde in dioxane. All the dyads as free bases and as Zn^II complexes were obtained in high yields. All new compounds were fully characterized by 1D and 2D NMR techniques, UV/Vis spectroscopy, and HRMS. Their photophysical properties were evaluated by measuring the fluorescence quantum yield, the singlet oxygen quantum yield by luminescence detection, and also the triplet lifetimes were correlated by flash photolysis and intersystem crossing (ISC) rates. The fluorescence lifetimes were measured by a time‐correlated single photon count (TCSPC) method, fluorescence decay associated spectra (FDAS), and anisotropy measurements. Magnetic circular dichroism (MCD) and circular dichroism (CD) spectra were recorded for one Zn^II complex in order to obtain information, respectively, on the electronic and conformational states, and interpretation of these spectra was enhanced by molecular orbital (MO) calculations. Electrochemical studies of the Zn^II complexes were also carried out to gain insights into their behavior for such applications.     

Direct amperometric determination of tert-butylhydroquinone in biodiesel

The direct amperometric determination of tert-butylhydroquinone (TBHQ) in biodiesel at an unmodified glassy carbon electrode is reported. A biodiesel aliquot was added into an electrochemical cell containing a 75% (v/v) ethanol-water solution under stirring (with final concentration of 50 mmol L⁻¹ HClO₄). The amperometric method involved the continuous application of three sequential potential pulses to the working electrode (700 mV for 300 ms, 0 mV for 100 ms and −50 mV for 1 s). TBHQ was continuously monitored at the first (direct oxidation) and optionally at the second (reduction) potential pulse while the third potential pulse was applied for cleaning of the electrode surface. For comparison, the samples were also analyzed by high-performance liquid-chromatography and a good agreement between the results was verified. Recovery values for spiked samples were between 90% and 95% and the reproducibility of the proposed method was around 5% (n = 5). The proposed method can be easily adapted for on-site analysis.