Online large volume sample staking preconcentration and separation of enantiomeric GHRH analogs by capillary electrophoresis

A capillary electrophoresis method is proposed to analyze the four most well-known growth hormone–releasing hormone (GHRH) analogs that are misused by athletes. Dimethyl-β-cyclodextrin used as a chiral selector allowed, for the first time, the separation of those basic peptide analogs, including enantiopeptides (sermorelin and CJC-1293) that differ by the chirality of only one amino acid. To increase the method sensitivity, electrokinetic preconcentration methods have been investigated. The large volume sample stacking with polarity switching (PS-LVSS) method with an injected sample volume corresponding to 80% of the capillary one was found superior to the sweeping in terms of signal enhancement factor (SEF). Acid and organic solvent addition to the sample (0.1 mM phosphoric acid with 30% methanol) led to a twofold signal improvement, when compared to water as a matrix. We increased capillary dimensions to provide a signal enhancement through the injection of a larger sample volume. Finally, using a combination of the optimized PS-LVSS preconcentration with the chiral capillary zone electrophoresis (CZE), the GHRH analogs were separated and limits of detection between 75 and 200 ng/mL were reached. This method was successfully applied to urine after a desalting step. An optimized C18 SPE was used for that purpose in order to provide low sample conductivity (<130 µS/cm) and preserve the efficiency of LVSS preconcentration. SEF of 640 was obtained with desalted urine spiked with sermorelin by comparison to the CZE (without preconcentration) method.     

In Situ Polymerized 1,3-Dioxolane Electrolyte for Integrated Solid-State Lithium Batteries

Solid-state lithium batteries are promising and safe energy storage devices for mobile electronics and electric vehicles. In this work, we report a facile in situ polymerization of 1,3-dioxolane electrolytes to fabricate integrated solid-state lithium batteries. The in situ polymerization and formation of solid-state dioxolane electrolytes on interconnected carbon nanotubes (CNTs) and active materials is the key to realizing a high-performance battery with excellent interfacial contact among CNTs, active materials and electrolytes. Therefore, the electrodes could be tightly integrated into batteries through the CNTs and electrolyte. Electrons/ions enable full access to active materials in the whole electrode. Electrodes with a low resistance of 4.5 Ω □⁻¹ and high lithium-ion diffusion efficiency of 2.5×10⁻¹¹ cm² s⁻¹ can significantly improve the electrochemical kinetics. Subsequently, the batteries demonstrated high energy density, amazing charge/discharge rate and long cycle life.     

Lithium Ferrocyanide Catholyte for High-Energy and Low-cost Aqueous Redox Flow Batteries**

Aqueous redox flow batteries (ARFBs) are a promising technology for grid-scale energy storage, however, their commercial success relies on redox-active materials (RAM) with high electron storage capacity and cost competitiveness. Herein, a redox-active material lithium ferrocyanide (Li₄[Fe(CN)₆]) is designed. Li⁺ ions not only greatly boost the solubility of [Fe(CN)₆]⁴⁻ to 2.32 M at room temperature due to weak intermolecular interactions, but also improves the electrochemical performance of [Fe(CN)₆]^4−/3−. By coupling with Zn, ZIRFBs were built, and the capacity of the batteries was as high as 61.64 Ah L⁻¹ (pH-neutral) and 56.28 Ah L⁻¹ (alkaline) at a [Fe(CN)₆]⁴⁻ concentration of 2.30 M and 2.10 M. These represent unprecedentedly high [Fe(CN)₆]⁴⁻ concentrations and battery energy densities reported to date. Moreover, benefiting from the low cost of Li₄[Fe(CN)₆], the overall chemical cost of alkaline ZIRFB is as low as $11 per kWh, which is one-twentieth that of the state-of-the-art VFB ($211.54 per kWh). This work breaks through the limitations of traditional electrolyte composition optimization and will strongly promote the development of economical [Fe(CN)₆]^4−/3−-based RFBs in the future.     

Promoting Photocatalytic H2 Evolution through Retarded Charge Trapping and Recombination by Continuously Distributed Defects in Methylammonium Lead Iodide Perovskite

Inspired by its great success in the photovoltaic field, methylammonium lead iodide perovskite (MAPbI₃) has recently been actively explored as photocatalysts in H₂ evolution reactions. However, the practical application of MAPbI₃ photocatalysts remains hampered by the intrinsically fast trapping and recombination of photogenerated charges. Herein, we propose a novel strategy of regulating the distribution of defective areas to promote charge-transfer dynamics of MAPbI₃ photocatalysts. By deliberately designing and synthesizing the MAPbI₃ photocatalysts featuring a unique continuation of defective areas, we demonstrate that such a feature enables retardation of charge trapping and recombination via lengthening the charge-transfer distance. As an outcome, such MAPbI₃ photocatalysts turn out to achieve an impressive photocatalytic H₂ evolution rate as high as 0.64 mmol ⋅ g⁻¹ ⋅ h⁻¹, one order of magnitude higher than that of the conventional MAPbI₃ photocatalysts. This work establishes a new paradigm for controlling charge-transfer dynamics in photocatalysis.     

酰氨基硫脲类新型分子钳受体的合成及其对氟离子的识别性能研究

本文设计并高产率合成了三种新型阴离子识别受体化合物,它们对F-的识别选择性较卤素其他阴离子的高。其对F-的识别性能通过紫外—可见光谱和核磁共振氢谱进行了检测,光谱数据表明,在DMSO溶液中受体与F-通过氢键相互作用形成1:1配合物。与以前我们报道的受体化合物相比,由于此类分子钳受体化合物具有更多的阴离子识别位点,因此具有更好地阴离子识别性能。     

Synthesis and Characterization of Copper(II) and Zinc(II) Tricyanomethanide (tcm) Complexes with Di(2‐pyridyl)amine (dpyam) as Co‐ligands: [Cu(dpyam)(tcm)2], [Cu(dpyam)(tcm)(OAc)] and Zn(dpyam)2(tcm)2

Three new transition metal tricyanomethanide complexes [Cu(dpyam)(tcm)₂] ( 1 ), [Cu(dpyam)(tcm)(OAc)] ( 2 ) and Zn(dpyam)₂(tcm)₂ ( 3 ) were synthesized and characterized by single crystal X‐ray diffraction analysis. In 1 each copper(II) atom is coordinated to three tcm anions and one dpyam molecule to form a square pyramide geometry. In 2 the coordination geometry around the central metal is also square pyramidal, and each copper atom is surrounded by two tcm anions, one dpyam ligand and one OAc. Both 1 and 2 display a µ_1,5‐tcm bridged infinite chain structure. In 3 each zinc(II) atom is coordinated by two tcm anions and two dpyam molecules to form a distorted octahedral geometry. Different from the former two complexes, 3 shows a mononuclear structure. Magnetic susceptibility measurement in the range 2–300 K indicates that there are weak antiferromagnetic couplings between adjacent copper(II) ions in 1 (J=?0.03 cm^?1) and 2 (J=?0.11 cm^?1) respectively.     

对苯二甲酸、2-(3-吡啶基)苯并咪唑配位聚合物的合成、晶体结构和发光

在水热条件下,对苯二甲酸(H2Bdc)和2-(3-吡啶基)苯并咪唑(3-PyHBIm)与Cd(NO3)2、Zn(NO3)2反应,得到配合物{[Cd(3-PyHBIm)(Bdc)(H2O)2](H2Bdc)1/2}n (1)、[Zn(3-PyHBIm)2(Bdc)(H2O)2]n (2)。单晶X-射线衍射结构分析表明,两个化合物均呈一维聚合结构,3-PyHBIm配体采用吡啶氮原子单齿配位。在配合物1中,对苯二甲酸根作为四齿配体,桥联Cd(II)离子,形成一维锯齿链状配位聚合物,两个水分子呈顺式配位。该化合物含有对苯二甲酸客体分子,通过强的氢键,构成三维超分子框架。在配合物2中,对苯二甲酸根作为双齿配体,结合Zn(II)离子,形成直线链状配位聚合物,两个水分子呈反式配位。两个配位聚合物都对热稳定,在固体状态下,呈蓝色发光。     

Synthesis and herbicidal activities of pyridyl sulfonylureas： More convenient preparation process of phenyl pyrimidylcarbamates

Four 4-monosubstituted pyrimidine pyridyl sulfonylureas were synthesized from pyridinesulfonamide and phenyl pyrimidylcarbamate and screened for herbicidal activities. We also reported a convenient preparation process of phenyl pyrimidylcarbamates from pyrimidineamine and phenyl chloroformate.     

Side-effect of ancillary ligand on electron transfer and photodynamics of a dinuclear valence tautomeric complex

A cobalt complex [[Co(dpqa)]2(dhbq)](PF6)3 ((PF6)3, dhbq = deprotonated 2,5-dihydroxy-1,4-benzoquinone, dpqa = di(2-pyridylmethyl)-N-(quinolin-2-ylmethyl)amine) was prepared and studied by X-ray diffraction, electrochemistry, ESR, thermally and photo-induced magnetic measurements; the results show that the ancillary ligand finely tuned structural factors as well as intermolecular interactions that affect the VT behavior.     

Enhanced Electrocatalytic Water Oxidation by Interfacial Phase Transition and Photothermal Effect in Multiply Heterostructured Co9S8/Co3S4/Cu2S Nanohybrids

The rational design of advanced nanohybrids (NHs) with optimized interface electronic environment and rapid reaction kinetics is pivotal to electrocatalytic schedule. Herein, we developed a multiple heterogeneous Co₉S₈/Co₃S₄/Cu₂S nanoparticle in which Co₃S₄ germinates between Co₉S₈ and Cu₂S. Using high-angle annular-dark-field imaging and theoretical calculation, it was found that the integration of Co₉S₈ and Cu₂S tends to trigger the interface phase transition of Co₉S₈, leading to Co₃S₄ interlayer due to the low formation energy of Co₃S₄/Cu₂S (−7.61 eV) than Co₉S₈/Cu₂S (−5.86 eV). Such phase transition not only lowers the energy barrier of oxygen evolution reaction (OER, from 0.335 eV to 0.297 eV), but also increases charge carrier density (from 7.76×10¹⁴ to 2.09×10¹⁵ cm⁻³), and creates more active sites. Compared to Co₉S₈ and Cu₂S, the Co₉S₈/Co₃S₄/Cu₂S NHs also demonstrate notable photothermal effect that can heat the catalyst locally, offset the endothermic enthalpy change of OER, and promote carrier migrate, reaction intermediates adsorption/deprotonation to improve reaction kinetics. Profiting from these favorable factors, the Co₉S₈/Co₃S₄/Cu₂S catalyst only requires an OER overpotential of 181 mV and overall water splitting cell voltage of 1.43 V to driven 10 mA cm⁻² under the irradiation of near-infrared light, outperforming those without light irradiation and many reported Co-based catalysts.