Synthesis, structure and α-olefin polymerization activity of group 4 metal complexes with [OSSO]-type bis(phenolate) ligands

The tetradentate [OSSO]-type bis(phenol) ligands, [{2,2′-(HOC₆H₂-4,6-R₂)₂CH₂SCH₂CH₂SCH₂}] (R = ^tBu, 2; Br, 3) react with MBz₄ (M = Zr, Hf) to yield the corresponding dibenzyl complexes, [M{2,2′-(OC₆H₂-4,6-R₂)₂CH₂SCH₂CH₂SCH₂}Bz₂] (R = Br, M = Zr, 4^Br; Hf, 5^Br; R = ^tBu, M = Hf, 5) in a good to very good yield. Zirconium diamido complexes, [Zr{2,2′-(OC₆H₂-4,6-R₂)₂CH₂SCH₂CH₂SCH₂}(NMe₂)₂] (R = ^tBu, 6; Br, 6^Br) were prepared in a reaction of the corresponding disodium salt of 2 or 3 generated in situ with ZrCl₂(NMe₂)₂(THF)₂. Heating of 6 with TMSCl at 35 °C afforded zirconium dichloro complex, [Zr{2,2′-(OC₆H₂-4,6-^tBu₂)₂CH₂SCH₂CH₂SCH₂}Cl₂] (7), whereas the titanium analog 8 was prepared in a direct reaction with TiCl₄. While for complexes 4^Br, 5, 5^Br, 6, 6^Br and 7 single C₂-symmetric isomers were observed in solution at room temperature, as revealed by the NMR spectroscopic data, titanium complex 8 formed as a mixture of cis-α (8a) and cis-β (8b) isomers in a ratio of approx. 20:80% (measured in CD₂Cl₂). The VT NMR studies revealed a reversible conversion of 8a into 8b above 60 °C. The X-ray crystal structure determination of complexes 4^Br, 5^Br and 7 confirmed their C₂-symmetrical configuration in the solid state with cis-arranged benzyl/chloro groups and the trans-coordination of two bulky phenolato moieties. The zirconium dibenzyl complexes exhibit good catalytic activities in homopolymerization of 1-hexene (atactic poly(1-hexene), PDI = 1.5-1.7) and vinylcyclohexane (isotactic poly(vinylcyclohexane), PDI = 1.2-1.8) upon activation with a co-catalyst. In both polymerizations no increase of activity was observed for the complex 4^Br with electron-withdrawing substituents on phenolate rings. Moreover, polymerization of liquid propylene catalyzed by the titanium dichloro isomeric mixture 8 afforded at 5 °C ultrahigh molecular weight atactic/isotactic polypropylene mixtures.     

Theoretical study of Ng--NiN(2) (Ng=Ar,Ne,He)

It is shown that NiN(2) and noble gas atoms, Ar, Ne, and He, combine with the binding energy of 11.52, 4.06, and 7.37 kcal/mol, respectively, by the multireference perturbational (CASPT2) method. By the density functional theory calculations using MPWPW91 functionals, the Ni-N-N bending frequency in NiN(2) and Ar-NiN(2) is estimated as 310.7 and 358.7 cm(-1), respectively, the latter of which is in good agreement with the corresponding experimental frequency, 357.0 cm(-1), determined for NiN(2) isolated in solid argon.     

Structural difference between a superconducting sodium cobalt oxide and its related phase

Monolayer hydrate (MLH) Na_xCoO₂·y′H₂O was obtained from superconducting bilayer hydrate (BLH) Na_xCoO₂·yH₂O by partial extraction of H₂O molecules between the CoO₂ layers. Magnetization measurements indicated that electron densities in the CoO₂ layer of the MLH phase remained unchanged after the water extraction. Nevertheless, superconductivity was completely suppressed in the MLH phase. This strongly suggests that the highly 2D nature in the BLH phase due to its thick insulating layers consisting of H₂O molecules and Na⁺ ions plays an important role for inducing superconductivity.     

Structure refinement and chemical analysis of Cs3Li(DSO4)4, formerly ‘Cs1.5Li1.5D(SO4)2’

An accurate structure refinement of the deuterated analog of the cesium lithium acid sulfate, formerly identified as ‘Cs_1.5Li_1.5H(SO₄)₂’, has been carried out using neutron diffraction methods. Like the protonated material reported earlier (Merinov et al., Solid State Ionics 69 (1994) 53), the compound is cubic, , however, the correct stoichiometry is Cs₃Li(DSO₄)₄. There are four formula units per unit cell and six atoms in the asymmetric unit. The lattice constant measured in this work is a=11.743(2) Å, comparable to the earlier results. The structure contains one disordered hydrogen bond, formed between O(2) atoms and located on two of the edges of the single LiO₄ tetrahedron. The Li site occupancy is , as is that of the deuterium site. This level of site occupancies is consistent with a structure in which hydrogen bonds are formed only when the lithium site is unoccupied, and explains the otherwise close proximity of the Li and D atoms, 1.394(10) Å. This unusual structural feature furthermore leads to a fixed stoichiometry, as confirmed here by chemical analysis of both the deuterated and protonated materials, despite the partial occupancy of the lithium and deuterium (hydrogen) atom sites.     

Self-assembly patterning of colloidal crystals constructed from opal structure or NaCl structure

We developed a novel self-assembly process to fabricate an orderly array of particle wires constructed from a close-packed colloidal crystal without preparation of patterned templates. A substrate was immersed vertically into a SiO2 colloidal solution, and the liquid surface moved downward upon evaporation of solution. Particles formed a mono-/multiparticle layer, which was cut by the periodic drop-off of solution. The orderly array of particle wires was successfully fabricated, showing the suitability of the self-assembly process for the fabrication of nano-/microstructures constructed from nano-/microparticles or blocks. The mechanism of the assembly process and control of thickness, width, and interval of particle wires were further discussed. Moreover, an array of particle wires constructed not from close-packed face-centered cubic (or hexagonal close packed) structure but from two kinds of particles was realized to fabricate an array of particle wires with NaCl structure by this self-assembly process.     

Aggregation states and surface wettability in films of poly(styrene-block-2-perfluorooctyl ethyl acrylate) diblock copolymers synthesized by atom transfer radical polymerization

Well-defined poly(styrene-block-2-perfluorooctyl ethyl acrylate) [P(St-b-PFA)] copolymers with various chemical compositions were synthesized by atom transfer radical polymerization. Films of P(St-b-PFA) were structurally characterized, from bulk to surface, on the basis of transmittance electron microscopic observation and small-angle X-ray scattering, X-ray photoelectron spectroscopic, and contact angle measurements. For a comparison, poly(styrene-random-2-perfluorooctyl ethyl acrylate) [P(St-ran-PFA)] copolymers were also synthesized by conventional free radical polymerization. While P(St-b-PFA) with the 2-perfluorooctyl ethyl acrylate (PFA) content higher than 18.7 mol % formed a typical phase-separated cylinder structure, P(St-b-PFA) with a lower PFA content and P(St-ran-PFA) were in a miscible state. Since the perfluoroalkyl groups possess extremely low surface energy, they were preferentially segregated at the film surface, resulting in the formation of the PFA surface layer. This was the case for all P(St-b-PFA) films examined, although the aggregation state at the surface was strongly dependent on the PFA content. In the case of the P(St-b-PFA) with the PFA content higher than 18.7 mol %, both advancing and receding contact angles for water were 120 degrees and even larger with almost no hysteresis. In addition, extremely excellent oil-repellent surface properties such as advancing and receding contact angles for dodecane of 76 degrees and 75 degrees were also observed. However, these intriguing liquid-repellent properties were not observed for the films of miscible P(St-b-PFA) and P(St-ran-PFA). Therefore, it can be concluded that the internal structure beneath the surface as well as the surface itself should be deeply considered to design excellent and stable liquid-repellent materials.     

In situ observation of single polymers adsorbed onto mica surfaces in water

The morphology of a cationic polymer of high molecular weight, poly[2-(acryloyloxy)ethyl(trimethyl)ammoniumchloride], adsorbed on to a mica surface in water was observed in situ using the tapping mode of an atomic force microscope with a high-resolution probe. It was found that the morphology of adsorbed polymers changes with time to be lumplike, floclike, and then fibril-like and that it takes surprisingly a long time for the polymers to relax completely in water, even though they are highly charged. Detailed structures of extended polymers are also discussed.     

Intensely Fluorescent Azobenzenes: Synthesis,Crystal Structures,Effects of Substituents,and Application to Fluorescent Vital Stain

2‐[Bis(pentafluorophenyl)boryl]azobenzenes bearing hydrogen, methoxy, dimethylamino, trifluoromethyl, fluoro, n‐butyl, and tert‐butyldimethylsiloxy groups at the 4′‐position or methoxy and bromo groups at the 4‐position have been synthesized. The 4‐bromo group of the 2‐boryl‐4‐bromoazobenzene derivative was converted to phenyl and diphenylamino groups by palladium‐catalyzed reactions. The absorption and fluorescence properties have been investigated using UV/Vis and fluorescence spectroscopy. The 2‐borylazobenzenes emitted an intense green, yellow, and orange fluorescence, in marked contrast to the usual azobenzene fluorescence. The 4′‐siloxy derivative showed the highest fluorescence quantum yield (0.90) among those reported for azobenzenes to date. The correlation between the substituent and the fluorescence properties was elucidated by studying the effect of the substituent on the relaxation process and from DFT and TD‐DFT calculations. An electron‐donating group at the 4′‐position was found to be important for an intense emission. Application of fluorescent azobenzenes as a fluorescent vital stain for the visualization of living tissues was also investigated by microinjection into Xenopus embryos, suggesting these compounds are nontoxic towards embryos.     

A Zinc(II)/poly(gamma-glutamic acid) complex as an oral therapeutic for the treatment of type-2 diabetic KKAy mice

In developing new insulin-mimetic zinc(II) complexes with various ligands including a biodegradable polymer, we prepared and characterized a Zn(gamma-pga) complex in solution as well as in solid, and investigated its in vitro insulin-mimetic activity and in vivo antidiabetic effect in type-2 diabetic KKA(y) mice. The in vitro insulin-mimetic activity of the Zn(gamma-pga) complex was considerable better than that of ZnSO(4). The Zn(gamma-pga) complex normalized the hyperglycemia in KKA(y) mice within 21 d when administrated orally at doses of 10-20 mg (0.15-0.31 mmol) Zn per kg body mass for 30 d. In addition, the impaired glucose tolerance, elevated HbA(1c) levels and metabolic syndromes were significantly improved in Zn(gamma-pga)-treated KKA(y) mice relative to those administrated with saline and ZnSO(4).     

One-pot concise syntheses of benzimidazo[2,1-a]isoquinolines by a microwave-accelerated tandem process

Direct, efficient syntheses of the benzimidazo[2,1-a]isoquinoline ring system have been achieved with 2-bromoarylaldehydes, terminal alkynes, and 1,2-phenylenediamines by a microwave-accelerated tandem process in which a Sonogashira coupling, 5-endo cyclization, oxidative aromatization, and 6-endo cyclization can be performed in a single synthetic operation.