Dinitrogen formation by oxidative intramolecular N---N coupling in cis,cis-[(bpy)2(NH3)RuORu(NH3)(bpy)2]4+

The (15)N-labeled diammine(mu-oxo)ruthenium complex cis,cis-[(bpy)(2)(H(3)(15)N)Ru(III)ORu(III)((15)NH(3))(bpy)(2)](4+) ((2-(15)N)(4+)) was synthesized from cis,cis-[(bpy)(2)(H(2)O)Ru(III)ORu(III)(H(2)O)(bpy)(2)](4+) by using ((15)NH(4))(2)SO(4) and isolated as its perchlorate salt in 17% yield. A 1:1 mixture of (2-(15)N)(4+) and nonlabeled cis,cis-[(bpy)(2)(H(3)(14)N)Ru(III)ORu(III)((14)NH(3))(bpy)(2)](4+) were electrochemically oxidized in aqueous solution. The gaseous products (14)N(2) and (15)N(2) were formed in equimolar amounts with only a small amount of (14)N(15)N detected. This demonstrates that dinitrogen formation by oxidation of the diammine complex proceeds by intramolecular N---N coupling.     

Structure refinement and chemical analysis of Cs3Li(DSO4)4, formerly ‘Cs1.5Li1.5D(SO4)2’

An accurate structure refinement of the deuterated analog of the cesium lithium acid sulfate, formerly identified as ‘Cs_1.5Li_1.5H(SO₄)₂’, has been carried out using neutron diffraction methods. Like the protonated material reported earlier (Merinov et al., Solid State Ionics 69 (1994) 53), the compound is cubic, , however, the correct stoichiometry is Cs₃Li(DSO₄)₄. There are four formula units per unit cell and six atoms in the asymmetric unit. The lattice constant measured in this work is a=11.743(2) Å, comparable to the earlier results. The structure contains one disordered hydrogen bond, formed between O(2) atoms and located on two of the edges of the single LiO₄ tetrahedron. The Li site occupancy is , as is that of the deuterium site. This level of site occupancies is consistent with a structure in which hydrogen bonds are formed only when the lithium site is unoccupied, and explains the otherwise close proximity of the Li and D atoms, 1.394(10) Å. This unusual structural feature furthermore leads to a fixed stoichiometry, as confirmed here by chemical analysis of both the deuterated and protonated materials, despite the partial occupancy of the lithium and deuterium (hydrogen) atom sites.     

Dilatometric study of monovalent counter-ion association with carboxylates

Volume changes accompanying the protonation of mono-, di- and poly-carboxylates in water were measured at 25° using the circulation dilatometer. The carboxylates include alkali metal and tetra-alkylammonium (TAA) salts of acetic, pivalic, glutaric acid and samples of poly(methacrylic acid) (PMA) having various molecular weights and degrees of stereoregularity. It was found that TAA counter-cation exerts specific influence on the differential molar volume change on protonation of the pivalate and PMA in contrast to the absence of such specificity in the corresponding alkali metal salts. These results were interpreted by the proposed association of the hydrophobic ammonium cation with the carboxylate anions. Volume contraction is accompanied by the association. It was also proposed, on the basis of these findings, that alkali metal counter-ion is not likely to be ‘site bound’ by the respective charges of PMA. PMA configuration has a minor effect on the volume change.     

Specific oxidation of C-14 oxygenated 4(20),11-taxadienes by microbial transformation

Three C-14 oxygenated taxanes, 2α,5α,10β,14β-tetraacetoxytaxa-4(20),11-diene (1), 2α,5α,10β-triacetoxy-14β-(2-methylbutyryloxy)taxa-4(20),11-diene (2), and yunanaxane (3), major products of callus cultures of Taxus spp., were regio- and stereoselectively hydroxylated at the 7β position by a fungus, Absidia coerulea IFO 4011. Intriguingly, when 1 was co-administered with β-cyclodextrin and incubated with the fungus cell cultures, three other compounds 5α,9α,10β,13α-tetraacetoxytaxa-4(20),11-dien-14β-ol (7), 5α,9α,10β,13α-tetraacetoxytaxa-4(20),11-dien-1β-ol (8) and 5α,9α,10β,13α-tetraacetoxy-11(15→1) abeotaxa-4(20),11-dien-15-ol (9) were obtained.     

Dehydrogenation of ethylbenzene with CO2 over Cr-MCM-41 catalyst

M-MCM-41 catalysts (M: V, Cr, Fe, and Ga) prepared by direct hydrothermal synthesis (DHT) have been tested for dehydrogenation of ethylbenzene with CO₂. The synthesized materials were characterized by X-ray diffraction (XRD), N₂ adsorption (77 K), and diffuse reflectance UV–vis spectroscopic measurements. Cr-MCM-41 showed the highest activity among M-MCM-41 catalysts tested, resulting in the production of styrene with the conversion of 65% and the selectivity above 90%. The rate of styrene formation increased with increasing Cr loading up to 1.7 wt.%. It is suggested that Cr(VI)O₄ in tetrahedral coordination is formed as an active monochromate species and reduced to Cr(III)O₆ in octahedral coordination as a less active polychromate species during the reaction. Deactivated catalyst was regenerated by a treatment with gaseous oxygen or CO₂, during which redistribution as well as reoxidation of polymeric Cr(III)O₆ octahedra to monomeric Cr(VI)O₄ tetrahedra was observed. The rate of CO formation increased together with that of styrene formation, while the rate of H₂ formation decreased, with increasing partial pressure of CO₂. It was confirmed that reverse water-gas shift reaction took place over Cr-MCM-41 by a separate experiment. The rate of CO formation during the dehydrogenation of ethylbenzene with CO₂ over Cr-MCM-41 was well accounted for by assuming parallel occurrence of two reactions, i.e., direct oxidative dehydrogenation of ethylbenzene with CO₂ and simple dehydrogenation of ethylbenzene thermodynamically assisted by reverse water-gas shift reaction.     

Marginal electron density and density-difference functions

Summary For visual analysis of the density reorganization and distortion, the one-dimensional cut (x, y ₀,z ₀) and the two-dimensional cut (x, y, z ₀) of the three-dimensional electron density difference function (x, y, z) are frequently employed. However, these cut functions do not satisfy any sum rules in contrast to the original difference function (x, y, z). To avoid this difficulty, the use of the marginal electron density functions _x (x) and _xy (x, y) and their difference functions _x (x) and _xy (x, y) is proposed. The marginal densities are condensation of the three-dimensional density onto a particular plane or line of our interest, and they satisfy the sum rule (i.e., the conservation of the number of electrons) exactly. Some basic properties of the marginal electron density are clarified for typical diatomic molecular orbitals. An illustrative application is given for the bonding and antibonding processes in the H₂ system.     

Self-assembly patterning of silica colloidal crystals

We developed a self-assembly process of silica particles to fabricate desired patterns of colloidal crystals having high feature edge acuity and high regularity. A micropattern of colloidal methanol prepared on a self-assembled monolayer in hexane was used as a mold for particle patterning, and slow dissolution of methanol into hexane caused shrinkage of molds to form micropatterns of close-packed SiO2 particle assemblies. This result is a step toward the realization ofnano/micro periodic structures for next-generation photonic devices by a self-assembly process.     

Synthesis of 2-, 4- and 5-(2-alkylcarbamoyl-1-methylvinyl)-7-alkyloxybenzo[b]furans and their leukotriene B4 receptor antagonistic activity

Variable benzo[b]furan derivatives having (E)- and (Z)-2-alkylcarbamoyl-1-methylvinyl groups at the 2-, 4- and 5-positions and a carboxylpropoxy or (1-phenyl)ethoxy group at the 7-position were prepared to find novel and selective leukotriene B4(LTB4) receptor antagonists. (E)-2-(2-diethylcarbamoyl-1-methylvinyl)-7-(1-phenylethoxy)benzo[b]furan (4v) showed selective inhibition to the human BLT2 receptor (hBLT2). On the other hand, (E)-2-acetyl-4-(2-diethylcarbamoyl-1-methylvinyl)-7-(1-phenylethoxy)benzo[b]furan (7v) inhibited both human BLT(1) receptor (hBLT1) and hBLT2. The (E)-2-(2-diethylcarbamoyl-1-methylvinyl) group lay on approximately the same plane as the benzo[b]furan ring, whereas the (E)-4-(2-diethylcarbamoyl-1-methylvinyl) group had the torsion angle (45.7 degree) from the benzo[b]furan ring plane. However, the (Z)-(2-alkylcarbamoyl-1-methylvinyl)benzo[b]furans were inactive. The inhibitory activity depended on the conformation of the 2-diethylcarbamoyl-1-methylvinyl group.     

Theoretical study of Ng--NiN(2) (Ng=Ar,Ne,He)

It is shown that NiN(2) and noble gas atoms, Ar, Ne, and He, combine with the binding energy of 11.52, 4.06, and 7.37 kcal/mol, respectively, by the multireference perturbational (CASPT2) method. By the density functional theory calculations using MPWPW91 functionals, the Ni-N-N bending frequency in NiN(2) and Ar-NiN(2) is estimated as 310.7 and 358.7 cm(-1), respectively, the latter of which is in good agreement with the corresponding experimental frequency, 357.0 cm(-1), determined for NiN(2) isolated in solid argon.     

Decarboxylation of α-keto carboxylic acids by persulfoxide

Photosensitized oxygenation of diethyl sulfide in the presence of α-keto carboxylic acids caused oxidative decarboxylation of the acids by persulfoxide and gave carboxylic acids, carbon dioxide, diethyl sulfoxide and diethyl sulfone.