A Pitzer Model for Lead Oxide Solubilities in the Presence of Borate to High Ionic Strength

In this study, a hydrolysis model for lead, applicable to high ionic strength, is developed based on lead oxide solubilities as a function of ionic strength. Solubility measurements on lead oxide, α-PbO (tetragonal, red), mineral name litharge, as a function of ionic strength were conducted in NaClO₄ solutions up to I?=?0.45 mol·kg^?1, in NaCl solutions up to I?=?5.0 mol·kg^?1, and in Na₂SO₄ solutions up to I?=?5.4 mol·kg^?1, at room temperature (22.5?±?0.5 °C). The lead hydroxyl species considered in this work include the following,

$$ {\text{PbO}}\left( {\text{cr}} \right) \, + {\text{ 2H}}^{ + } \rightleftharpoons {\text{Pb}}^{ 2+ } + {\text{ H}}_{ 2} {\text{O}}\left( {\text{l}} \right) $$

(1)

$$ {\text{Pb}}^{ 2+ } + {\text{ H}}_{ 2} {\text{O}}\left( {\text{l}} \right) \rightleftharpoons {\text{PbOH}}^{ + } + {\text{ H}}^{ + } $$

(2)

$$ {\text{Pb}}^{ 2+ } + {\text{ 2H}}_{ 2} {\text{O}}\left( {\text{l}} \right) \rightleftharpoons {\text{Pb}}\left( {\text{OH}} \right)_{ 2} \left( {\text{aq}} \right) \, + {\text{ 2H}}^{ + } $$

(3)

$$ {\text{Pb}}^{ 2+ } + {\text{ 3H}}_{ 2} {\text{O}}\left( {\text{l}} \right) \rightleftharpoons {\text{Pb(OH}})_{3}^{ - } + 3{\text{H}}^{ + } $$

(4)

The equilibrium constants for Reactions (1) and (2) were taken from literature. The equilibrium constants in base 10 logarithmic units for Reactions (3) and (4) are determined in this study as ? 17.05?±?0.10 (2σ) and ? 27.99?±?0.15 (2σ), respectively, with a set of Pitzer parameters describing the interactions with Na⁺, Cl^?, and \( {\text{SO}}_{4}^{2 - } .\) In combination with the parameters from literature including those that have already been published by our group, the solution chemistry of lead in a number of media including NaCl, MgCl₂, NaHCO₃, Na₂CO₃, Na₂SO₄, NaClO₄, and their mixtures, can be accurately described in a wide range of ionic strengths.

     

Infrared spectra of homogeneous and heterogeneous proton-bound dimers in the gas phase

Infrared multiphoton dissociation spectra of three homogeneous and two heterogeneous proton-bound dimers were recorded in the gas phase. Comparison of the experimental infrared spectra recorded in the fingerprint region of the proton-bound dimers with spectra predicted by electronic structure calculations shows that all modes which are observed contain motion of the proton oscillating between the two monomers. The O-H-O asymmetric stretch for the homogeneous dimers is shown to occur at around 800 cm-1. As expected, the O-H-O asymmetric stretching modes for the heterogeneous proton-bound dimers are observed to shift to significantly higher energy with respect to those for the homogeneous proton-bound dimers due to the asymmetry of the O-H-O moeity. This shift is shown to be predictable from the difference in proton affinities between the two monomers. Density functional predictions of the infrared spectra based on the harmonic oscillator model are demonstrated to predict the observed spectra of the homogeneous proton-bound dimers with reasonable accuracy. Calculations of the structure and infrared spectrum of protonated diglyme at the B3LYP/6-31+G** level and basis also agree well with an infrared spectrum recorded previously. For both heterogeneous proton-bound dimers, however, the predicted spectra are blue-shifted with respect to experiment.     

Orbital-free density functional theory applied to NaAlH4

We present the application of orbital-free density functional theory (OF-DFT) to NaAlH(4), a potential hydrogen storage material, and related systems. Although the simple Al and NaH structures are reproduced reasonably well by OF-DFT, the approach fails for the more complex NaAlH(4) structure. Calculations on AlH(3) show that the failure to describe the Al-H interaction is related to the kinetic energy functionals used rather than the local pseudopotentials which are required within the OF-DFT approach. Thus, systems such as NaAlH(4) present a challenge which awaits the development of more reliable orbital-free kinetic energy functionals.     

Titanous chloride as a reagent for quantitative organic microanalysis. III. Microdetermination of quinones

Summary The preparation of stabilized 0.02N titanous chloride solution is described. Benzoquinones and naphthoquinones are reacted with excess 0.02N titanous chloride at room temperature and back-titrated with 0.02N ferric ammonium sulfate. Anthraquinone and its derivatives, except aminoanthraquinone, require boiling temperatures for complete reduction. Polycyclic quinones are resistant to titanous chloride under these conditions.

---

Zusammenfassung Die Herstellung stabiler 0,02-n Titan(III)-chloridlösung wird beschrieben. Benzo- und Naphthochinone reagieren bei Zimmertemperatur mit dieser Maßlösung, die dann mit 0,02-n Eisen(III)-chloridlösung zurücktitriert wird. Anthrachinon und dessen Derivate mit Ausnahme von Aminoanthrachinon werden nur bei Siedehitze vollständig reduziert. Polyoyklische Chinone werden von Titan(III)-chlorid unter diesen Bedingungen nicht angegriffen.

---

Résumé On décrit la préparation d'une solution de chlorure titaneux 0,02N stabilisée. On fait réagir les benzoquinones et les naphtoquinones avec un excès de chlorure titaneux 0,02N à température ambiante et l'on titre en retour par le sulfate de fer-III et d'ammonium 0,02N. Les anthraquinones et leurs dérivés, sauf l'amino-anthraquinone, exigent la température de l'ébullition pour la réduction complète. Dans ces conditions, les quinones polycycliques résistent au chlorure titaneux.

     

Rapid analysis of inflammatory cytokines in cerebrospinal fluid using chip-based immunoaffinity electrophoresis

A chip-based capillary electrophoresis system has been designed for rapidly measuring the concentrations of inflammatory cytokines in the cerebrospinal fluid of patients with head trauma. Isolation of the reactive cytokines was achieved by immunoaffinity capture using a panel of six immobilized antibodies, directly attached to the injection port of the chip. The captured cytokines were labeled in situ with a red light-emitting laser dye and electroeluted into the separation channel. Separation of the isolated cytokines was achieved by electrophoresis in under 2 min with quantification of the resolved peaks being achieved by on-line laser-induced fluorescence and integration of each peak area. Comparison of the results to commercially available high-sensitivity immunoassays demonstrates that the chip-based assay provides a fast, accurate procedure for studying the concentrations of these analytes in complex biological materials. The degree of accuracy and precision achieved by the chip-based CE is comparable to conventional immunoassays, the system being able to analyze between 10-12 samples per hour. With the ever-expanding array of antibodies that are commercially available, this chip-based system can be applied to a wide variety of different analyses.     

Total synthesis of didemnimide A and B

The total synthesis of didemnimide A and didemnimide B, novel predator-deterrent alkaloids from the Caribbean mangrove ascidian Didemnum conchyliatum, is described.     

The analysis of chlorinated dibenzofurans in municipal fly ash: Supercritical fluid extraction vs Soxhlet

A multiresidue supercritical fluid extraction procedure for chlorinated dibenzofurans (PCDFs) has been optimized as an efficient method for the determination of these compounds in fly ash samples. The results were compared with those obtained by Soxhlet extraction. Extracts from the two procedures were analyzed by gas chromatography–mass spectrometry (HRGC–MS) Statistical analysis of the results confirmed that supercritical fluid extraction provides data with a relative standard deviation of less than 10% while Soxhlet extraction data show a much greater spread.     

Characterization and determination of PCB isomers by high resolution gas chromatography and HRGC/mass spectrometry

An integrated analytical procedure for polychlorinated biphenyl (PCB) multiresidues in environmental samples has been developed and applied to well-characterized samples. PCB residues are characterized and quantified using wall coated open tubular column (WCOT) gas chromatography or HRGC/MS-selected ion monitoring. An automated data system based on a Spectra Physics SP-4200 computing integrator is used to select and quantitate peaks of individual congeners and homolog groups. This procedure consistently yields results with a reproducibility within 3 percent for HRGC-ECD and 3.7 percent for HRGC/MS-SIM technique respectively.