Application to routine analysis of a method to determine multiclass pesticide residues in fresh vegetables by gas chromatography/tandem mass spectrometry

The use of gas chromatography/tandem mass spectrometry (GC/MS/MS) applied to determine multiple pesticide residues in fresh vegetables has been thoroughly studied. A single injection method to detect, confirm and quantify 54 multiclass pesticides has been developed and applied in a routine analysis laboratory. The proposed method consists of a rapid extraction of 15 g of vegetable sample with dichloromethane. An additional clean-up step is not necessary even when injecting 10 microL of extract. Instead the gas chromatograph was fitted with a carbofrit inserted into the glass liner and a guard column. In addition, the detection mode chosen (MS/MS) provides additional selectivity. The method has been validated and applied to 1300 samples in a routine laboratory following specified quality criteria. The recovery efficiencies obtained for all the pesticides ranged between 70.2 and 110.8% at two different fortification levels. The relative standard deviation for quantification (RSD) was lower than 16.7% for all the compounds. Important experimental parameters, such as the conditioning of carbofrit, overload of the analytical column, and cleanliness of the ion trap, were evaluated for their influence on the performance of the method.     

Selection of thermotolerant yeasts for simultaneous saccharification and fermentation (SSF) of cellulose to ethanol

A total of 27 yeast strains belonging to the groupsCandida, Saccharomyces, andKluyveromyces were screened for their ability to grow and ferment glucose at temperatures ranging 32-45°C. K. marxianus andK. fragilis were found to be the best ethanol producing organisms at the higher temperature tested and, so, were selected for subsequent simultaneous saccharification and fermentation (SSF) studies.     

Reaction of methyl 4-nitrobenzenesulfonate with Br- in water-formamide tetradecyltrimethylammonium bromide micellar solutions

Summary The reaction methyl 4-nitrobenzenesulfonate + Br^- was studied in water-formamide tetradecyltrimethylammonium bromide micellar solutions. A pseudophase kinetic model was used to quantitatively rationalize the kinetic micellar effects observed     

Determination of “solvent” concentration in “chromatographic solutions” on the cellulose sorbents

An attempt was undertaken to furnish an entirely quantitative characteristics to the thermodynamic model of the chromatographic system presented in (2). The attempt proved to be successful and one managed to establish simultaneously a new method enabling direct determination of the hydrogen-bond enthalpy from the PC experimental results.     

Structural characterization of CeO(2)-ZrO(2)/TiO(2) and V(2)O(5)/CeO(2)-ZrO(2)/TiO(2) mixed oxide catalysts by XRD, Raman spectroscopy, HREM, and other techniques

Structural characteristics of CeO(2)-ZrO(2)/TiO(2) (CZ/T) and V(2)O(5)/CeO(2)-ZrO(2)/TiO(2) (V/CZ/T) mixed oxide catalysts have been investigated using X-ray diffraction (XRD), BET surface area, Raman spectroscopy (RS), and high-resolution transmission electron microscopy (HREM) techniques. The CeO(2)-ZrO(2) (1:1 mole ratio) solid solution was deposited over a finely powdered TiO(2) support by a deposition precipitation method. A nominal 5 wt % V(2)O(5) was impregnated over the calcined (773 K) CZ/T mixed oxide carrier by a wet impregnation technique. The obtained CZ/T and V/CZ/T samples were further subjected to thermal treatments from 773 to 1073 K to understand the dispersion and temperature stability of these materials. In the case of CZ/T samples, the XRD results suggest the formation of different cubic and tetragonal Ce-Zr-oxide phases, Ce(0.75)Zr(0.25)O(2), Ce(0.6)Zr(0.4)O(2), Ce(0.5)Zr(0.5)O(2), and Ce(0.16)Zr(0.84)O(2) in varying proportions depending on the treatment temperature. With increasing calcination temperature from 773 to 1073 K, the intensity of the lines pertaining to cubic Ce(0.6)Zr(0.4)O(2) and Ce(0.5)Zr(0.5)O(2) phases increased at the expense of cubic Ce(0.75)Zr(0.25)O(2), indicating more incorporation of zirconia into the ceria lattice. The TiO(2) was mainly in the anatase form whose crystallite size also increased with increasing treatment temperature. A better crystallization and more incorporation of zirconia into the ceria lattice was noted when CZ/T was impregnated with V(2)O(5). However, no crystalline V(2)O(5) could be seen from both XRD and RS measurements. In particular, a preferential formation of CeVO(4) compound and an intense tetragonal Ce(0.16)Zr(0.84)O(2) phase were noted beyond 873 K. The HREM results indicate, in the case of CZ/T samples, a well-dispersed Ce-Zr-oxide of the size approximately 5 nm over the bigger crystals ( approximately 40 nm) of TiO(2) when treated at 873 K. The exact structural features of these crystals as determined by digital diffraction analysis of experimental images reveal that the Ce-Zr-oxides are mainly in the cubic fluorite geometry and the TiO(2) is in anatase form. A better crystallization of Ce-Zr-oxides ( approximately 8 nm) over the surface of bigger crystals of TiO(2) was noted at 1073 K. A further enhancement in the crystallite size and zirconia-rich tetragonal phase was noted in the case of V/CZ/T samples. Further, the structure of CeVO(4) formed was also clearly identified in conformity with XRD and RS results.     

UV index experimental values during the years 2000 and 2001 from the Spanish broadband UV-B radiometric network

An analysis is made of experimental ultraviolet erythemal solar radiation data measured during the years 2000 and 2001 by the Spanish UV-B radiation evaluation and prediction network. This network consists of 16 Robertson-Berger type pyranometers for evaluating solar erythemal radiation and five Brewer spectroradiometers for evaluating the stratospheric ozone. On the basis of these data the Ultraviolet Index (UVI) was evaluated for the measuring stations that are located either in coastal regions or in the more densely populated regions inland on the Iberian Peninsula. It has been checked that in most cases the maximum irradiance values corresponded to solar noon, although there were exceptions that could be explained by cloudiness. The maximum experimental values of the UVI were around 9 during the summer, though frequently passing this value at the inland measurement stations. The annual accumulated dose of irradiation on a horizontal plane has also been studied, as well as the evolution through the year in units of energy, standard erythemal doses and minimum erythemal doses, according to different phototypes.     

Synthesis and characterization of oligosalicylaldehyde-based epoxy resins

The synthesis of a new epoxy resin of oligosalicylaldehyde by the reaction with epichlorohydrin is reported. New resin’s epoxy value and chlorine content were determined and found to be 25% and 1%, respectively. The characterization of the new resin was instrumented by FTIR, ¹H NMR, scanning electron microscopy, and thermal gravimetric analyses. TGA results showed that the cured epoxy resin has a good resistance to thermal decomposition. The mass losses of cured epoxy resin were found to be 5%, 10%, 50% at 175°C, 240°C, and 400°C, respectively. On the curing procedure the resin was cured with polyethylenepolyamine at 25 °C for 8 h and 100°C for 1.5 h. The FTIR spectrum of new epoxy resin gave the peak of oxirane ring at ṽ = 918 cm⁻¹. In memory of Professor Dr. Adalet R. Vilayetoğlu     

An ultrasensitive method for the determination of thiouracil and phenylthiouracil using capillary zone electrophoresis and laser-induced fluorescence detection

This paper reports the development of a method based on capillary electrophoresis with laser-induced fluorescence detection for the simultaneous determination of thiouracil (TU) and phenylthiouracil (PhTU) with high sensitivity (nanomolar range, i.e., attomoles detected). After derivatization with 5-iodoacetamidofluorescein, the analytes were separated by capillary zone electrophoresis using 20 mM phosphate buffer (pH 10.0) and quantified by fluorescence detection. The linearity range, precision, recovery, and detection limits were determined, and the method was shown to be applicable for the determination of TU and PhTU in spiked feed samples and urine.     

Identifying acetylated lignin units in non-wood fibers using pyrolysis-gas chromatography/mass spectrometry

A series of non-wood plant fibers, namely kenaf, jute, sisal and abaca, have been analyzed upon pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS) of the whole material. The pyrolysis products mainly arise from the carbohydrate and lignin moieties of the fibers. The lignin-derived phenols belonged to the p-hydroxyphenylpropanoid (H), guaiacylpropanoid (G) and syringylpropanoid (S) structures, and showed a high S/G ratio of between 2.0 and 5.4, the highest corresponding to kenaf. Among the lignin-derived phenols released, small amounts of sinapyl and coniferyl acetates (in both cis- and trans-forms) were identified for the first time upon Py-GC/MS of lignocellulosic materials. Acetylation of the sinapyl and coniferyl alcohols was at the gamma-position of the side chain. The release of these alcohols derived from intact acetylated lignin units upon pyrolysis seems to indicate that the native lignin in the fibers selected for this study is at least partially acetylated. Sinapyl (and coniferyl) acetates have recently been suggested to be authentic lignin precursors involved in the polymerization of lignin along with the normal sinapyl and coniferyl alcohols. Py-GC/MS will offer a convenient and rapid tool for analyzing naturally acetylated lignins, as well as to screen plant materials for the presence of acetylated units in lignin.     

A Comparative Study of Naproxen – Beta Cyclodextrin Complexes Prepared by Conventional Methods and Using Supercritical Carbon Dioxide

Naproxen is a poorly soluble anti-inflammatorydrug, the solubility of which canbe enhanced by complexation withbeta-cyclodextrin. Besides that, the inclusioncomplex reduces the incidence of gastrointestinal side effects of the drug. The aim of this work was to compare the physicochemical characteristics of the solid complexes prepared by traditional methods (kneading, freeze-drying and spray-drying) and using a supercritical fluid technology. The unusual solvent properties of carbon dioxide above their critical temperature and pressure were exploited in order to prepare inclusion compounds. Complexes prepared using supercritical fluid technology showed similar properties to those of freeze-drying andspray-drying complexes as proved by DSC, FT-IRand UV.