Crystalline structure of polyamide 12 as revealed by solid‐state 13C NMR and synchrotron WAXS and SAXS

The crystalline structure of polyamide‐12 (PA12) was studied by solid‐state ¹³C nuclear magnetic resonance (NMR) as well as by synchrotron wide‐ and small‐angle X‐ray scattering (WAXS and SAXS). Isotropic and oriented PA12 showed different NMR spectra ascribed to γ‐ and γ′‐crystalline modifications, respectively. On the basis of the position of the first diffraction peak, the isotropic γ‐form and the oriented γ′‐form were shown to be with hexagonal crystalline lattice at room temperature. When heated, the two PA12 polymorphs demonstrated different behaviors. Above 140 °C, the isotropic γ‐PA12 partially transformed into α‐modification. No such transition was observed with the oriented γ′‐PA12 phase even after annealing at temperatures close to melting. A γ′–γ transition was observed here only after isotropization by melting point. Various structural parameters were extracted from the WAXS and SAXS patterns and analyzed as a function of temperature and orientation: the degree of crystallinity, the d‐spacings, the Bragg's long spacings, the average thicknesses of the crystalline (l_c) and amorphous (l_a) phases, and the linear crystallinity x_cl within the lamellar stacks. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 3720–3733, 2005     

Comparison of Several Calibration Procedures for Glass Electrodes in Proton Concentration

Several reported procedures for calibrating glass electrodes in proton concentration are compared. Some recommendations for non-experts are also given. The examined procedures can be classified into two broad categories, namely: those based on direct potential difference measurements of solutions of known proton concentration and those that use one or several pH standards to calibrate the electrode and subsequently measure the pH of solutions containing known proton concentrations. With a single buffer, the two types of procedures lead to equivalent results. However, if two pH buffers are used, the slope of the calibration graph in proton concentration will differ from the real electrode slope to an extent proportional to the difference between the liquid junction potentials of the two buffers. Therefore, any other method is preferable under these circumstances.     

Electrochemistry nanometric patterning of MOF particles: Anisotropic metal electrodeposition in Cu/MOF

Electrodeposition of copper from Cu/MOF immersed into acetate buffer produces a quasi-periodic series of 10–20 nm sized laminae sandwiched within the pristine MOF lattice as monitored by voltammetry of microparticles/atomic force microscopy. This anisotropic patterning can be qualitatively described in terms of a highly orientation-dependent diffusion of electrons and charge-balancing electrolyte counterions in the MOF network.     

Magydardiendiol,diterpenoid with a new skeleton from magydaris panacifolia (umbelliferae).

Three new diterpenoids with a substituted α-cyclogeraniol skeleton have been isolated from the umbelliferae $\text{Magydaris panacifolia}$ (Vahl) Lange, for which the names of magydar-2,13-dien-11,17-diol, $\text{1}$, magydar-2,10 (20), 13-trien-17-ol, $\text{2}$, and magydar-2,10(20), 13-trien-17-yl acetate, $\text{3}$, are proposed. The structures of these substances have been deduced from spectroscopic and chemical data.     

Proton nuclear magnetic resonance characterisation of glycosaminoglycans using chemometric techniques

Various types of glycosaminoglycans (GAGs) including heparins, chondroitin sulfates, dermatan sulfate and hyaluronic acid were studied from their proton nuclear magnetic resonance (1H NMR) spectra using chemometric techniques. Despite the complexity of the 1H NMR signals, data analysis using principal component analysis enabled the different GAG classes to be distinguished and permitted their classification according to their chemical structure. The analysis of the composition of the major disaccharide unit and other relevant chemical structures in the heparin samples was performed using partial least squares regression.     

Molybdenum(VI) and molybdenum(V) mononuclear and dinuclear complexes with 1,3-diphenyl-1,3-propanedione

Summary The synthesis and the dinuclear or mononuclear nature of several molybdenum(VI) and molybdenum(V) oxocomplexes derived from 1,3-diphenyl-1,3-propanedione (HLL) are described. These complexes were identified by i.r. and electronic spectra, magnetic susceptibility and analytical data, and are assigned the following formulae: [MoO₂(LL)₂], [Mo₂O₅(LL)₂], [Mo₂O₄(LL)₂], [MoOCl(LL)₂], [MoCl₂(LL)] and [MoO(OH)(LL)₂)]. The low magnetic moments of the dinuclear complexes are due, in part, to intramolecular interactions. The i.r. data show that the dionate is bound by two oxygen atoms forming a chelate six-membered ring.     

Intramolecular hydrogen bonds and hydrogen-bonded systems in di-Schiff bases of 4-methyl-isophthalaldehyde with 4-substituted anilines

Three di-Schiff bases of 2-hydroxy-5-methyl-isophthalaldehyde with 4-R-anilines (R=H, CH₃, OCH₃) and their 1:1 complexes with HClO₄ were studied by FT-IR, ¹H, and ¹³C NMR spectroscopy in acetonitrile and [²H₃]acetonitrile solutions, respectively. In di-Schiff bases intramolecular OH…N hydrogen bonds have been detected; however, they show no proton polarizability. Hydrogen-bonded systems with fast proton fluctuation and large proton polarizability have been found in the 1:1 complexes of di-Schiff bases with HClO₄.     

Vascular endothelial and smooth muscle cell culture on NaOH-treated poly(epsilon-caprolactone) films: a preliminary study for vascular graft development

Tissue engineering offers the potential of providing vessels that can be used to replace diseased and damaged native blood vessels. The endothelization of a synthetic vascular graft minimizes the failures associated with blood clotting and platelet activation. The aim of this study was to culture vascular-derived endothelial and smooth muscle cells on both untreated and NaOH-treated poly(epsilon-caprolactone) (PCL) films, a biocompatible and bio-resorbable polymer, and to evaluate the behavior of both cell types as a preliminary study for vascular graft development. PCL films were prepared by hot pressing; characterized by DSC, IR, SEM, and scanning force microscopy; and treated with NaOH to increase the surface hydrophilicity before cell culture. Endothelial and smooth muscle cells, isolated from pig cava vein, were characterized by immunofluorescence and confocal microscopy studies of endothelial nitric oxide synthase and alpha-smooth muscle actin. Good adhesion, growth, viability and morphology of both the endothelial and smooth muscle cells on PCL films were obtained, but a light stimulation of mitochondrial activity was observed during short culture times. NaOH treatment improved the adhesion and enhanced the proliferation in both cell types. This verified the possible use of this modified polymer as a support in the preparation of a synthetic vascular graft. [Diagram: see text] SEM micrograph of smooth muscle cells cultured on NaOH-treated PCL film. (Original magnification: 1000x).     

Characterization of Mercury – Humic Acids Interaction by Potentiometric Titration with a Modified Carbon Paste Mercury Sensor

Stability constant for mercury binding by commercial and natural humic acids (HA) were determined using a new potentiometric mercury(II) sensor based on dithiosalicylic acid modified carbon paste electrode. The sensor present a high selective and sensitive response to mercury(II) ions, and a low detection limit of 1.8×10^?8 M. The potentiometric titrations curves of humic acids against mercury(II) ions were modeled. For 1.00×10^?7 to 3.00×10^?4 M mercury(II) ion concentration levels the results are consistent with the presence of two different binding sites in the humic acid macromolecule. The strongest binding sites (log K₁ ranging from 10.1 to 6.8) are probably due to interaction with carboxylic acid and amine groups in the molecule, whereas weakest binding sites (log K₂ ranging from 8.8 to 4.5) can be associated to phenolic groups.     

Supramolecular helical mesomorphic polymers. Chiral induction through H-bonding

The work described here concerns a challenge of general interest in supramolecular chemistry: the achievement of chiral helical organizations with controlled structures. This work provides a strategy to obtain supramolecular polymers in which a chiral helical conformation has been induced by a noncovalent association, that is, through hydrogen bonding. Polycatenar 2,4,6-triarylamino-1,3,5-triazines, which organize into columnar mesophases and are susceptible to H-bonding interactions, were chosen as a starting point to build up the chiral supramolecular structure. The stacking of these mesogens has been forced to wind in a helical way by means of H-bond association with (R)-3-methyladipic acid, within the mesophase. The optically active columnar organization has been studied in depth by optical microscopy, differential scanning calorimetry (DSC), X-ray diffraction, and circular dichroism. Formation of stable complexes between the triazine units and (R)-3-methyladipic acid has also been investigated by means of NMR diffusion-ordered spectroscopy (DOSY) experiments in chloroform.