Synthesis of tricyclic isoindoles and thiazolo[3,2-c][1,3]benzoxazines

The thermolysis of (3R,9bS)-5-oxo-2,3,5,9b-tetrahydrothiazolo[2,3-a]isoindole-3-carboxylic acids in Ac₂O led to novel 3-methylene-2,5-dioxo-3H,9bH-oxazolo[2,3-a]isoindoles and chiral (9bS)-5-oxo-2,3,5,9b-tetrahydrothiazolo[2,3-a]isoindoles were obtained on FVP. Starting from l-cysteine methyl ester (3R,10bR)-5-oxo-2,3-dihydro-10bH-[1.3]thiazolo[3,2-c][1,3]benzoxazines were obtained as single stereoisomers. The thermolysis of (3R,10bR)-5-oxo-2,3-dihydro-10bH-[1.3]thiazolo[3,2-c][1,3]benzoxazine-3-carboxylic acid in Ac₂O gave 5-acetyl-2-phenyl-2,3-dihydrothiazole. The structures of methyl (3R,9bS)-5-oxo-2,3,5,9b-tetrahydrothiazolo[2,3-a]isoindole-3-carboxylate 1a and methyl (2R,4R)-N-chlorocarbonyl-2-(2-hydroxyphenyl)thiazolidine-4-carboxylate 9 were determined by X-ray crystallography.     

A DFT study of the Huisgen 1,3-dipolar cycloaddition between hindered thiocarbonyl ylides and tetracyanoethylene

The mechanism for the 1,3-dipolar cycloaddition between the hindered thiocarbonyl ylide 1 and tetracyanoethylene 2 has been studied at the B3LYP/6-31G^∗ level. Formation of the [3+2] cycloadduct 4 takes place through a stepwise mechanism that is initiated by the nucleophilic attack of the thiocarbonyl ylide 1 to the ethylene derivative 2 to give a zwitterionic intermediate IN. The subsequent cyclization of IN yields a seven-membered cyclic ketene imine 6, which equilibrates with the thermodynamically more stable [3+2] cycloadduct 4. The computed free energies are in agreement with the experimental outcomes.     

Synthesis, characterization and potential biomedical applications of N-succinimidyl ester functionalized, polypyrrole-coated polystyrene latex particles

N-Succinimidyl ester functionalized polypyrrole-coated polystyrene latex particles (PS_E-PPyNSE) were prepared by the in situ copolymerization of pyrrole and the active ester-functionalized pyrrole (pyrrole-NSE) in the presence of polystyrene latex particles. Polystyrene microspheres were prepared by emulsion polymerization (PS_E) leading to particles having a diameter of 450 nm. These PS_E particles were precoated with poly(N-vinylpyrrolidone) prior to the in situ copolymerization of pyrrole and pyrrole-NSE. The initial comonomer concentration fractions were 25/75, 50/50 and 75/25 for pyrrole and pyrrole-NSE, respectively. The PPy-coated PS_E particles were characterized in terms of morphology, particle size, electrophoretic mobility and chemical composition. The study of morphology by means of scanning electron microscopy showed roughening of the underlying PS_E particles owing to the addition of PPyNSE, the overlayer thickness of which was estimated to be around 7 nm. Moreover, loading PPyNSE overlayers resulted in a shift of the electrophoretic mobility from –5.31 m cm/V s to a very small but positive value (0.082–0.112 m cm/V s). X-ray photoelectron spectroscopy and IR spectroscopy permitted the detection of pyrrole-NSE repeat units at the surface indicating that pyrrole and pyrrole-NSE did indeed copolymerize. The PS_E-PPyNSE particles were further evaluated as bioadsorbents of human serum albumin used as a test protein. For this study, PS_E-PPyNSE₅₀ particles, synthesized from a comonomer feed ratio of 50/50 in pyrrole/pyrrole-NSE, were used and were shown to attach efficiently human serum albumin macromolecules with a maximum amount of 0.2 mg m^–2.

Alkynyldiphenylphosphine d8 (Pt, Rh, Ir) complexes: contrasting behavior toward cis-[Pt(C6F5)2(THF)2

The synthesis and characterization of a series of mononuclear d(8) complexes with at least two P-coordinated alkynylphosphine ligands and their reactivity toward cis-[Pt(C(6)F(5))(2)(THF)(2)] are reported. The cationic [Pt(C(6)F(5))(PPh(2)C triple-bond CPh)(3)](CF(3)SO(3)), 1, [M(COD)(PPh(2)C triple-bond CPh)(2)](ClO(4)) (M = Rh, 2, and Ir, 3), and neutral [Pt(o-C(6)H(4)E(2))(PPh(2)C triple-bond CPh)(2)] (E = O, 6, and S, 7) complexes have been prepared, and the crystal structures of 1, 2, and 7.CH(3)COCH(3) have been determined by X-ray crystallography. The course of the reactions of the mononuclear complexes 1-3, 6, and 7 with cis-[Pt(C(6)F(5))(2)(THF)(2)] is strongly influenced by the metal and the ligands. Thus, treatment of 1 with 1 equiv of cis-[Pt(C(6)F(5))(2)(THF)(2)] gives the double inserted cationic product [Pt(C(6)F(5))(S)mu-(C(Ph)=C(PPh(2))C(PPh(2))=C(Ph)(C(6)F(5)))Pt(C(6)F(5))(PPh(2)C triple-bond CPh)](CF(3)SO(3)) (S = THF, H(2)O), 8 (S = H(2)O, X-ray), which evolves in solution to the mononuclear complex [(C(6)F(5))(PPh(2)C triple-bond CPh)Pt(C(10)H(4)-1-C(6)F(5)-4-Ph-2,3-kappaPP'(PPh(2))(2))](CF(3) SO(3)), 9 (X-ray), containing a 1-pentafluorophenyl-2,3-bis(diphenylphosphine)-4-phenylnaphthalene ligand, formed by annulation of a phenyl group and loss of the Pt(C(6)F(5)) unit. However, analogous reactions using 2 or 3 as precursors afford mixtures of complexes, from which we have characterized by X-ray crystallography the alkynylphosphine oxide compound [(C(6)F(5))(2)Pt(mu-kappaO:eta(2)-PPh(2)(O)C triple-bond CPh)](2), 10, in the reaction with the iridium complex (3). Complexes 6 and 7, which contain additional potential bridging donor atoms (O, S), react with cis-[Pt(C(6)F(5))(2)(THF)(2)] in the appropriate molar ratio (1:1 or 1:2) to give homo- bi- or trinuclear [Pt(PPh(2)C triple-bond CPh)(mu-kappaE-o-C(6)H(4)E(2))(mu-kappaP:eta(2)-PPh(2)C triple-bond CPh)Pt(C(6)F(5))(2)] (E = O, 11, and S, 12) and [(Pt(mu(3)-kappa(2)EE'-o-C(6)H(4)E(2))(mu-kappaP:eta(2)-PPh(2)C triple-bond CPh)(2))(Pt(C(6)F(5))(2))(2)] (E = O, 13, and S, 14) complexes. The molecular structure of 14 has been confirmed by X-ray diffraction, and the cyclic voltammetric behavior of precursor complexes 6 and 7 and polymetallic derivatives 11-14 has been examined.     

Luminescent Di‐ and Trinuclear Boron Complexes Based on Aromatic Iminopyrrolyl Spacer Ligands: Synthesis,Characterization, and Application in OLEDs

New bis‐ and tris(iminopyrrole)‐functionalized linear (1,2‐(HNC₄H₃‐C(H)?N)₂‐C₆H₄ ( 2 ), 1,3‐(HNC₄H₃‐C(H)?N)₂‐C₆H₄ ( 3 ), 1,4‐(HNC₄H₃‐C(H)?N)₂‐C₆H₄ ( 4 ), 4,4′‐(HNC₄H₃‐C(H)?N)₂‐(C₆H₄‐C₆H₄) ( 5 ), 1,5‐(HNC₄H₃C‐(H)?N)₂‐C₁₀H₆ ( 6 ), 2,6‐(HNC₄H₃C‐(H)?N)₂‐C₁₀H₆ ( 7 ), 2,6‐(HNC₄H₃C‐(H)?N)₂‐C₁₄H₈ ( 8 )) and star‐shaped (1,3,5‐(HNC₄H₃‐C(H)?N‐1,4‐C₆H₄)₃‐C₆H₃ ( 9 )) π‐conjugated molecules were synthesized by the condensation reactions of 2‐formylpyrrole ( 1 ) with several aromatic di‐ and triamines. The corresponding linear diboron chelate complexes (Ph₂B[1,3‐bis(iminopyrrolyl)‐phenyl]BPh₂ ( 10 ), Ph₂B[1,4‐bis(iminopyrrolyl)‐phenyl]BPh₂ ( 11 ), Ph₂B[4,4′‐bis(iminopyrrolyl)‐biphenyl]BPh₂ ( 12 ), Ph₂B[1,5‐bis(iminopyrrolyl)‐naphthyl]BPh₂ ( 13 ), Ph₂B[2,6‐bis(iminopyrrolyl)‐naphthyl]BPh₂ ( 14 ), Ph₂B[2,6‐bis(iminopyrrolyl)‐anthracenyl]BPh₂ ( 15 )) and the star‐shaped triboron complex ([4′,4′′,4′′′‐tris(iminopyrrolyl)‐1,3,5‐triphenylbenzene](BPh₂)₃ ( 16 )) were obtained in moderate to good yields, by the treatment of 3 – 9 with B(C₆H₅)₃. The ligand precursors are non‐emissive, whereas most of their boron complexes are highly fluorescent; their emission color depends on the π‐conjugation length. The photophysical properties of the luminescent polyboron compounds were measured, showing good solution fluorescence quantum yields ranging from 0.15 to 0.69. DFT and time‐dependent DFT calculations confirmed that molecules 10 and 16 are blue emitters, because only one of the iminopyrrolyl groups becomes planar in the singlet excited state, whereas the second (and third) keeps the same geometry. Compound 13 , in which planarity is not achieved in any of the groups, is poorly emissive. In the other examples ( 11 , 12 , 14 , and 15 ), the LUMO is stabilized, narrowing the gap between the highest occupied molecular orbital and the lowest unoccupied molecular orbital (HOMO–LUMO), and the two iminopyrrolyl groups become planar, extending the size of the π‐system, to afford green to yellow emissions. Organic light‐emitting diodes (OLEDs) were fabricated by using the new polyboron complexes and their luminance was found to be in the order of 2400 cd m^?2, for single layer devices, increasing to 4400 cd m^?2 when a hole‐transporting layer is used.     

Synthesis and functionalization of new polyhalogenated BODIPY dyes. Study of their photophysical properties and singlet oxygen generation

A theoretical and experimental study on the iodination of BODIPY dyes with different degrees of substitution has been developed. Polyhalogenated BODIPYs synthesized in this work are the first examples of this type of dyes with more than two halogen atoms in the BODIPY core and they can be selectively functionalized. Surprisingly, the position in which halogen is attached has a marked effect in the photophysical properties and modulates the fluorescence capacity of the resulting BODIPY. These iodinated BODIPYs are efficient singlet oxygen generators.     

Analysis of ochratoxin A in milk after direct immunoaffinity column clean-up by high-performance liquid chromatography with fluorescence detection

The present work describes a new analytical method for direct immunoaffinity column clean-up of ochratoxin A (OTA) in milk samples followed by determination of the toxin using high-performance liquid chromatography with fluorescence detection (HPLC-FD). Two different immunoaffinity cartridges (IAC) were investigated, and Ochraprep columns were chosen because they showed the best results. An average recovery of 89.8% and a mean RSD of 5.8% for artificially contaminated cow's milk in the range of 5-100 ng/L were attained. The calculated limit of detection (LOD) and limit of quantitation (LOQ) were as low as 0.5 and 5 ng/L, respectively. This new easy and fast method avoids a previous liquid-liquid extraction step and therefore the use of toxic chlorinated solvents. Chromatograms of the final extracts were clean and OTA could be easily detected at a retention time of 8.4 min without interferences. To assess the presence of the toxin in cow's milk eight samples of skimmed and four samples of whole milk were analysed and OTA was not detected over the established detection limit.     

trans‐[N,N′‐Bis­(salicyl­idene)­cyclo­hexane‐1,2‐diaminato]­nickel(II)–chloro­form (1/1)

In the title complex, trans‐{2,2′‐[cyclo­hexane‐1,2‐diyl­bis­(ni­t­rilo­methyl­idyne)]­di­phenol­ato‐κ⁴O,N,N′,O′}­nickel(II)–chloro­form (1/1), [Ni(C₂₀H₂₀N₂O₂)]·CHCl₃, the Ni atom has a square‐planar geometry, slightly tetrahedrally distorted. The Ni—N and Ni—O bonding distances are within the expected ranges for Ni–Schiff base derivatives. The di­imine bridge has a gauche conformation with the cyclo­hexyl ring almost coplanar with the NiN₂O₂ plane. The complex mol­ecules pack in dimers with an Ni?Ni distance of 3.59 (1) Å and form a three‐dimensional structure displaying a herring‐bone configuration. Channels are occupied by solvent mol­ecules, which are involved in C—H?O hydrogen bonds with the ligand O atoms.     

Fibre selection based on an overall analytical feature comparison for the solid-phase microextraction of trihalomethanes from drinking water

This paper describes the optimization of solid-phase microextraction (SPME) conditions for three different fibres (Carboxen-polydimethylsiloxane (CAR-PDMS), divinylbenzene-Carboxen-polydimethylsiloxane (DVB-CAR-PDMS) and polydimethylsiloxane-divinylbenzene (PDMS-DVB)) used to determine trihalomethanes (THMs) in water by headspace solid-phase microextraction and gas chromatography (HS-SPME-GC). The influence of temperature and salting-out effect was examined using a central composite design for each fibre. Extraction time was studied separately at the optimum values found for temperature and sodium chloride concentration (40 degrees C and 0.36g mL-1). The HS-SPME-GC-MS method for each fibre was characterised in terms of linearity, detection (LOD) and quantification (LOQ) limits and repeatability. The fibre PDMS-DVB was selected as it provided a broader linear range, better repeatability and lower detection and quantification limits than the others, particularly CAR-PDMS fibre. The accuracy of the proposed method using the PDMS-DVB fibre was checked by a recovery study in both ultrapure and tap water. A blank analysis study showed the absence of memory effects for this fibre. The reproducibility (expressed as a percentage of relative standard deviation) was 6-11% and the detection limits were between 0.078 and 0.52microgL-1 for bromoform and chloroform, respectively. Finally, the method was applied to determine THM concentration in two drinking water samples.     

Molecular and supramolecular C60-oligophenylenevinylene conjugates

Fullerene derivatives are attractive building blocks for the preparation of molecular and supramolecular photoactive devices. As a part of this research, combination of C60 with oligophenylenevinylene (OPV) subunits has generated significant research efforts. These results are summarized in the present account to illustrate the current state-of-the-art of fullerene chemistry for the development of new photoactive materials.