Diamond-like carbon films prepared by pulsed-laser evaporation

Diamond-like carbon thin films were prepared by pulsed-laser evaporation. In this method a carbon target was irradiated by a XeCl laser with a power density of 3×10⁸ W/cm² and carbon atoms, together with a small number of ions, were produced. Deposition rates and film properties changed sensitively with substrate temperature. The films deposited at 50°C were diamond-like, having reasonable hardness, high refractive index (2.1–2.2 at 633 nm), optical transparency in the infrared, electrical resistivity of 10⁸ cm and chemical inertness (no dissolution in a HFHNO₃ solution). The band gap measured from optical absorption was 1.4 eV. Raman spectrum and infrared absorption, whose features varied with the substrate temperature, were also measured. The films were amorphous and no crystallinity was observed, as confirmed by x-ray diffraction, transmission electron diffraction and Raman spectroscopy. Hydrogen atoms were incorporated in the films with a typical H/C ratio of 0.3. The application of a negative bias to the substrate modified the deposition due to the presence of ions.     

Forward-backward multiplicity correlations in σ+ p,K + p andpp collisions at 250 GeV/c

Forward-backward multiplicity correlations in σ⁺,K ⁺ p andpp collisions at 250 GeV/c ( \(\sqrt s \) =22 GeV) are given for all charges and for the different charge combinations. The correlations are found to be caused predominantly by centrally produced particles. It is demonstrated that this result is an agreement with observations at the ISR and the CERNp \(\bar p\) -Collider. The results are compared to expectations from LUND, DPM and FRITIOF Monte Carlo models and a geometrical picture relating correlations in hadron-hadron collisions toe ⁺ e ^? data in terms of impact parameters is tested.     

Energetic ion bombardment of Ag surfaces by C<Stack><Subscript>60</Subscript><Superscript>+</Superscript></Stack> and Ga<Superscript>+</Superscript> projectiles

The ion bombardment-induced release of particles from a metal surface is investigated using energetic fullerene cluster ions as projectiles. The total sputter yield as well as partial yields of neutral and charged monomers and clusters leaving the surface are measured and compared with corresponding data obtained with atomic projectile ions of similar impact kinetic energy. It is found that all yields are enhanced by about one order of magnitude under bombardment with the C60+ cluster projectiles compared with Ga+ ions. In contrast, the electronic excitation processes determining the secondary ion formation probability are unaffected. The kinetic energy spectra of sputtered particles exhibit characteristic differences which reflect the largely different nature of the sputtering process for both types of projectiles. In particular, it is found that under C60+ impact (1) the energy spectrum of sputtered atoms peaks at significantly lower kinetic energies than for Ga+ bombardment and (2) the velocity spectra of monomers and dimers are virtually identical, a finding which is in pronounced contrast to all published data obtained for atomic projectiles. The experimental findings are in reasonable agreement with recent molecular dynamics simulations.     

Application of stir bar sorptive extraction for wine analysis

Stir bar sorptive extraction (SBSE) coupled with gas chromatography/mass spectrometry (GC/MS) was used to analyse wine samples for three applications: flavour and compositional analysis; 2,4,6-trichloroanisole (TCA), a common off-aroma in wine; and agrochemicals. SBSE was found to be orders of magnitude more sensitive than modern conventional methodology, allowing for lower detection and quantitation levels, and improved confirmation of identity; SBSE often gave better signal to noise in scan mode than other methods in selective ion monitoring (SIM) mode. With the help of their characteristic mass spectra all agrochemicals could be identified unambiguously at concentrations of 10 microg L(-1) in wine and a further 100 constituents were detected in a Cabernet Sauvignon sample. Thus it is now possible to analyse complex samples such as wine by scan mode, with better confirmation of identity, and without sacrificing sensitivity, where previously SIM methodology had to be used.     

Underpotential deposition of tin(II) on a gold disc electrode and determination of tin in a tin plate sample

This work describes a study of the underpotential deposition (UPD) of Sn²⁺ on a polycrystalline gold disc electrode using cyclic voltammetry (CV) and chronocoulometry (CC). Sn²⁺ ions showed well-defined peaks from UPD and UPD stripping (UPD-S) in 1 mol/L HCl solutions, while bulk deposition (BD) and BD stripping (BD-S) of the ions were also observed. The measured UPD shifts, E_UPD, between the UPD-S and the BD-S peaks were more than 200 mV. The UPD charge and the surface coverage of tin were measured by CC. A new method for determining Sn²⁺ was therefore developed, based on the excellent electrochemical properties of the Au/Sn UPD system. A plot of the UPD-DPASV (differential pulse anodic stripping voltammetry) signal versus the Sn(II) concentration was obtained for [Sn(II)] of 1.98×10^–7 to 3.64×10^–5 M. The method developed here has been applied to determine the tin in a tin plate sample.     

Characteristics of hyaluronate-hydroxyethyl acrylate blend gel and release of cationic amphiphilic solutes

Hyaluronate-hydroxyethyl acrylate blend gel (HA-PHEA) were prepared to modify the brittleness of hyaluronate gel (HA) and the characteristics of HA-PHEA gel were compared with those of HA and polyhydroxyethyl acrylate (PHEA) gels. These gels were high in water content and transparent. HA-PHEA gel was improved in viscoelastic properties due to the elasticity and the high affinity with water of PHEA, and the drying-swelling cycles became reversible. The effective charge densities theta of the gels estimated from membrane potentials were -0.002, -0.008 and 0 mol dm(-3) for HA-PHEA, HA and PHEA gels. Effects of electro- static and nonelectrostatic interactions on absorptions and releases were studied using sodium benzoate (NaBA) as an anionic solute, and methylene blue (MB), chlorpromazine (CPHCl) and benzethonium chloride (BZTCl) as cationic solutes, in which CPHCl and BZTCl are cationic amphiphilic solutes. The releases of MB, CPHCl and BZTCl from HA-PHEA and HA gels were suppressed comparing with those of NaBA. By adding salts, the releases of MB and CPHCl were enhanced but those of BZTCl were suppressed due to enhancement of the intra- and intermicelle formation. In the releases of the cationic solutes from HA-PHEA gel, electrostatic and nonelectrostatic interactions with HA were found to play important roles. Behaviors of the releases from HA-PHEA gel were found to possess the features of HA gel.     

Determination of zearalenone and ochratoxin A in soil

Mycotoxins are secondary metabolites, formed by the action of fungi on agricultural crops in the field or during storage. These metabolites are highly toxic to animals and humans and high levels have been measured in agricultural crops. In order to evaluate human risks due to ingestion of mycotoxin-contaminated food different methods have been developed for analysis of mycotoxins in cereals and maize. In this project the focus was on mycotoxins in agricultural soil and the fate of these toxins in the soil-water-plant system. Two different mycotoxins were selected in the study: zearalenone (ZON) produced by species of Fusariumor Aspergillusand ochratoxin A (OTA) produced by species of Penicillium. We developed a method for analysis of these toxins in soil. Soil samples were extracted with methanol-water (9:1) and purified by solid-phase extraction (SPE, C8-columns). The final extract was analysed using high-pressure liquid chromatography (HPLC) with fluorescence detection. A Phenyl Hexyl column was used to separate the toxins. The detection limits obtained were 0.1 and 1.0 microg kg(-1) dry weight (dw) for OTA and ZON, respectively. The developed method has been used for analysis of different soils in connection with growth chamber experiments. The soil types used in the growth chamber experiments were a sandy soil, a sandy clay soil, and a soil with high content of organic matter. The recovery was determined as 85.8 and 93.4% and the repeatability to 5.1 and 12.8% for OTA and ZON, respectively. The reproducibility obtained was 8.5 and 15.0% for soil samples, representing concentration levels from 0.2-30 microg kg(-1) dw (OTA) and from 1.0-100 microg kg(-1) dw (ZON).