Synthesis and magnetic properties of multilayer Ni/Cu and NiFe/Cu nanowires

Highly ordered composite nanowires with multilayer Ni/Cu and NiFe/Cu have been fabricated by pulsed electrodeposition into nanoporous alumina membrane. The diameter of wires can be easily varied by pore size of alumina, ranging from 30 to 100 nm. The applied potential and the duration of each potential square pulse determine the thickness of the metal layers. The nanowires have been characterized by transmission electron microscopy (TEM), magnetic force microscopy (MFM), and vibrating sample magnetometer (VSM) measurements. The MFM images indicate that every ferromagnetic layer separated by Cu layer was present as single isolated domain-like magnet. This technique has potential use in the measurement and application of magnetic nanodevices.     

Practical stopping criteria for validating safety-critical software by estimating impartial reliability

In this research, we investigate stopping rules for software testing and propose two stopping rules from the aspect of software reliability testing based on the impartial reliability model. The impartial reliability difference (IRD-MP) rule considers the difference between the impartial transition-probability reliabilities estimated for both software developer and consumers at their predetermined prior information levels. The empirical–impartial reliability difference (EIRD-MP) rule suggests stopping a software test when the computed empirical transition reliability is tending to its estimated impartial transition reliability. To insure the high-standard requirement for safety-critical software, both rules take the maximum probability (MP) of untested paths into account.     

Numerical flow visualization of first cycle and cyclic motion of a rigid fling-clapping wing

A flow visualization of the two-dimensional rigid fling-clap motions of the flat-plate wing is performed to get the knowledge of fling-clapping mechanism that might be employed by insects during flight. In this numerical visualization, the time-dependent Navier-Stokes equations are solved for two types of wing motion; ‘fling followed by clap and pause motion’ and ‘cyclic fling-clapping motion’. The result is observed regarding the main flow features such as the sequential development of the two families of separation vortex pairs and their movement. For the ‘fling followed by clap and pause motion’, a strong separation vortex pair of counterrotation develops in the opening between the wings in the fling phase and they then move out from the opening in the following clap phase. For ‘the cyclic fling-clapping motion’, the separation vortex pair developed in the outside space in the clap phase move into the opening in the following fling phase. The separation vortex pair in the opening developed in the fling phase of the cyclic motion is observed to be stronger than those of the ‘fling followed by clap and pause motion’. Regarding the strong fling separation vortex and the weak clap separation vortex above it in the opening, the flow pattern of the fling phase of the cyclic fling and clap motion is different to that of the fling phase of the first cycle. The flow pattern of the third cycle of the cyclic fling-clapping motion is observed to be almost same as that of the second cycle. Therefore, a periodicity of the flow pattern is established after the second cycle.     

Magnetic,structural and electrical properties of ordered and disordered Co50Fe50 films

Co₅₀Fe₅₀ films with thickness varying from 100 to 500 Å were deposited on a glass substrate by sputtering process, respectively. Two kinds of CoFe films were studied: one was the as-deposited film, and the other the annealed film. The annealing procedure was to keep the films at 400 °C for 5 h in a vacuum of 5×10⁻⁶ mbar. From the X-ray study, we find that the as-deposited film prefers the CoFe(1 1 0) orientation. Moreover, the body-centered cubic (bcc) CoFe(1 1 0) line is split into two peaks: one corresponding to the ordered body-centered tetragonal (bct) phase, and the other, the disordered bcc phase. After annealing, the peak intensity of the ordered bct phase becomes much stronger, while that of the disordered bcc phase disappears. The annealing has also caused the ordered CoFe(2 0 0) line to appear. When the amount of the ordered bct phase in Co₅₀Fe₅₀ is increased, the saturation magnetization (M_s) and coercivity (H_c) become larger, but the electrical resistivity (ρ) decreases. From the temperature coefficient of resistance (TCR) measurement, we learn that the bct grains in the CoFe film start to grow at temperature 82 °C.     

Anionic polymerization of star-shaped nylon 6 with a trifunctional initiator

The anionic polymerization of ?-caprolactam (CLM) has been shown to proceed at high reaction rate when catalyzed by metallic lactamates and initiated by acyllactams. The role of initiator and catalyst concentration on the process of ?-caprolactam anionic polymerization has been explored, with the aim of selecting the most suitable experimental conditions for reaction injection molding (RIM). The overall polymerization rates and physical properties for reaction injection molding of star-shaped nylon 6 homopolymer have been studied by the quasi-adiabatic process. In order to model the actual rapid molding conditions, time vs. temperature reaction profiles were measured, and the relative rates of polymerization subsequently determined from these data.     

Allocating unfunded liability in pension valuation under uncertainty

This paper studied the cost allocation for the unfunded liability in a defined benefit pension scheme incorporating the stochastic phenomenon of its returns. In the recent literature represented by Cairns and Parker [Insurance: Mathematics and Economics 21 (1997) 43], Haberman [Insurance: Mathematics and Economics 11 (1992) 179; Insurance: Mathematics and Economics 13 (1993) 45; Insurance: Mathematics and Economics 14 (1994) 219; Insurance: Mathematics and Economics 14 (1997) 127], Owadally and Haberman [North American Actuarial Journal 3 (1999) 105], the fund level is modeled based on the plan dynamics and the returns are generated through several stochastic processes to reflect the current realistic economic perspective to see how the contribution changed as the cost allocation period increased. In this study, we generalize the previous constant value assumption in cost amortization by modeling the returns and valuation rates simultaneously. Taylor series expansion is employed to approximate the unconditional and conditional moments of the plan contribution and fund level. Hence the stability of the plan contribution and the fund size under different allocation periods could be estimated, which provide valuable information adding to the previous works.     

Photoinduced Transformation between Charge Carrier and Spin Carrier in Polymers

By dynamical simulations, we show a transforming process between neutral soliton （spin carrier） and charged soliton （charge carrier） in polymers via photo-excitation, taking a polaron as the transitional bridge. It is photoinduced transformation between spin carrier and charge carrier. In this way, we demonstrate an access for polymers to be applied to spintronics.     

Anchoring Properties of Nematic Liquid Crystals Studied Using the Attenuated Total Reflection Method

By using the attenuated total reflection method associated with the excitation of surface plasmons, the tilt angle of the liquid crystal director and its gradient at the surface are measured in a planar nematic cell as a function of the applied voltage. The surface anchoring anisotropy δπ of the liquid crystal and the surface elastic constant k_s, are found to be δπ = 0.288 erg/cm and k_s, = 9·12 × 10^-11 erg, respectively, when the boundary condition suggested by Barbero et al is used. The theoretical and experimental values obtained with this boundary condition and that of Mada are discussed. The results show that the boundary condition proposed by Barbero et al is in better agreement with the experiment.     

An optimization approach for planning daily drayage operations

Daily drayage operations involve moving loaded or empty equipment between customer locations and rail ramps. Our goal is to minimize the cost of daily drayage operations in a region on a given day. Drayage orders are generally pickup and delivery requests with time windows. The repositioning of empty equipment may also be required in order to facilitate loaded movements. The drayage orders are satisfied by a heterogeneous fleet of drivers. Driver routes must satisfy various operational constraints. We present an optimization methodology for finding cost-effective schedules for regional daily drayage operations. The core of the formulation is a set partitioning model whose columns represent routes. Routes are added to the formulation by column generation. We present numerical results for real-world data which demonstrate that our methodology produces low cost solutions in a reasonably short time.