A family of calix[4]arene-supported [Mn(III)2Mn(II)2] clusters

In the cone conformation calix[4]arenes possess lower-rim polyphenolic pockets that are ideal for the complexation of various transition-metal centres. Reaction of these molecules with manganese salts in the presence of an appropriate base (and in some cases co-ligand) results in the formation of a family of calixarene-supported [Mn(III)(2)Mn(II)(2)] clusters that behave as single-molecule magnets (SMMs). Variation in the alkyl groups present at the upper-rim of the cone allows for the expression of a degree of control over the self-assembly of these SMM building blocks, whilst retaining the general magnetic properties. The presence of various different ligands around the periphery of the magnetic core has some effect over the extended self-assembly of these SMMs.     

Formal synthesis of (+)-neooxazolomycin via a Stille cross-coupling/deconjugation route

A formal synthesis of neooxazolomycin is described via the preparation of Kende’s key intermediate in a longest linear sequence of 23 steps. This work is founded upon the union of three fragments: Moloney’s lactam-derived triflate, a vinyl stannane and a Julia-Kocienski sulfone and encompasses three key steps: (i) a Stille cross-coupling to combine the triflate and vinyl stannane, (ii) a base-promoted enone deconjugation to derive the dihydroxylation precursor and (iii) our previously reported Julia-Kocienski methodology to assemble the pentadienyl amine side chain with the sulfone precursor.     

Hydrogen abstraction by chlorine atom from amino acids: remarkable influence of polar effects on regioselectivity

Quantum chemistry computations have been used to investigate hydrogen-atom abstraction by chlorine atom from protonated and N-acetylated amino acids. The results are consistent with the decreased reactivity at the backbone α-carbon and adjacent side-chain positions that is observed experimentally. The individual effects of NH(3)(+), COOH, and NHAc substituents have been examined and reveal important insights. The NH(3)(+) group in isolation is found to be deactivating at the α-position, while the acetamido group is activating. For the COOH group, polar effects lead to a contrathermodynamic deactivation of the thermodynamically most favorable α-abstraction. In the N-acetylamino acid, the α-position is deactivated by the combined inductive effect of the substituents and the presence of an early transition structure, again overriding the greater thermodynamic stability of the α-centered radical product. Deactivation of the α-, β-, and γ-positions results in a peculiar stability for amino acids and peptides and their derivatives with respect to radical degradation.     

Synthesis and characterization of cyano-substituted carborane-based compounds. Molecular structure of [1-(4-C7H7)-12-(C5H3-3-(CN)-3,4-(CH3)2)-C2B10H10

The reaction of cyanogen chloride with [1-(4-C(7)H(7))-12-(C(5)H(3)-3,4-(CH(3))(2))-C(2)B(10)H(10)] (7) was found to yield two new C(5)-substituted carborane cluster-based compounds, [1-(4-C(7)H(7))-12-(C(5)H(2)-3-(CN)-3,4-(CH(3))(2))-C(2)B(10)H(10)] (8) and [1-(4-C(7)H(7))-12-(C(5)H-2,4-(CN)(2)-3,4-(CH(3))(2))-C(2)B(10)H(10)] (9). This cyano-substitution pattern is in contrast to the known substitution for the analogous organic quinarene[5.6.7] system. The observed unique cluster-based products may be understood by a combination of steric and electronic effects. Compounds 8 and 9 were characterized by complete multinuclear NMR, (1)H-(1)H COSY NMR, (1)H-(13)C HMQC NMR, FTIR, UV-Vis, IR, MS data and a single crystal analysis for 8 [X-ray data for 8: C(17)H(25)B(10)N, monoclinic, space group P2(1)/n with cell constants a = 8.6794(17) ?, b = 11.021(2) ?, c = 43.175(9) ?, β = 91.00(3)°, V = 4129.2(14) ?(3), Z = 8, R(1) = 0.0729, wR(2) = 0.1464].     

Self‐assembly of di‐ and triblock PEG‐pentavaline amphiphiles

Nanoparticles formed from amphiphilic block copolymers can be used as drug delivery vehicles for hydrophilic therapeutics. Poly(ethylene glycol) (PEG)‐peptide copolymers were investigated for their self‐assembling properties and as consequent potential delivery systems. Mono‐ and dihydroxy PEGs were functionalized with a pentavaline sequence bearing Fmoc end groups. The molecular weight of the PEG component was varied to evaluate copolymer size and block number. These di‐ and tri‐block copolymers readily self‐assemble in aqueous solution with critical aggregation concentrations (CACs) of 0.46–16.29 μM. At concentrations above the CAC, copolymer solutions form spherical assemblies. Dynamic light scattering studies indicate these aggregates have a broad size distribution, with average diameters between 33 and 127 nm. The copolymers are comprised β‐conformations that are stable up to 80 °C, as observed by circular dichroism. This peptide secondary structure is retained in solutions up to 50% MeOH as well. The triblock copolymers proved to be the most stable, with copolymers synthesized from 10 kDa PEG having the most stable particles. Loading of carboxyfluorescein at 2–5 mol % shows that these copolymers have the potential to encapsulate hydrophilic drugs for delivery applications. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Use of a temperature‐programmable injector coupled to gas chromatography–combustion–isotope ratio mass spectrometry for compound‐specific carbon isotopic analysis of polycyclic aromatic hydrocarbons

Compound‐specific isotopic analysis (CSIA) can provide information about the origin of analysed compounds; for instance, polycyclic aromatic hydrocarbons (PAHs) in aerosols. This could be a valuable tool in source apportionment of particulate matter (PM) air pollution. Because gas chromatography–combustion–isotope ratio mass spectrometry (GC‐C‐IRMS) analysis requires an amount of at least 10 ng of an individual PAH, a high concentration of PAHs in the injected extract is needed. When the concentration is low a large volume injector creates the possibility of introducing a satisfactory amount of individual PAHs. In this study a temperature‐programmable injector was coupled to GC‐C‐IRMS and injection parameters (solvent level, transfer column flow, transfers time) were optimised using six solid aromatic compounds (anthracene, fluoranthene, pyrene, benzo[b]fluoranthene, benzo[k]fluoranthene, benzo[a]pyrene) dissolved in n‐pentane and EPA 610 reference mixture. CSIA results for solid PAHs were compared with results obtained for the single components analysed by elemental analysis–isotope ratio mass spectrometry. The injection method was validated for two sample injection volumes, 50 and 100 µL. This method was also compared with commonly used splitless injection. To be included in the study, measurements had to have an uncertainty lower than 0.5‰ for and a minimum peak height of 200 mV. The lower concentration limits at which these criteria were fulfilled for PAHs were 30 mg/L for 1 µL in splitless injection and 0.3 and 0.2 mg/L for 50 and 100 µL, respectively, in large volume injection. Copyright © 2009 John Wiley & Sons, Ltd.     

A soft collision detection algorithm for simple Brownian dynamics

We describe a collision detection algorithm for spherical bodies that performs a minimal amount of computation consistent with maintaining reasonable steric exclusion. The algorithm was tested using populations of bodies that move randomly without inertia, simulating Brownian-like motion. Simulations were tested using populations of different size, up to 100,000 bodies, at different densities. The algorithm is linear in time and memory with the number of bodies and would be suitable for the simulation of ‘soft’ objects, such as cells.     

Kinetics of adsorption of high molecular weight anionic polyacrylamide onto kaolinite: the flocculation process

The adsorption kinetics of anionic polyacrylamide flocculant onto kaolinite clay are examined as a function of flocculant dosage and pH. Special attention has been given to the flocculation effect during the adsorption process and the resulting inhibition of further adsorption. At pH 8.5 the adsorption capacity of anionic polyacrylamide on kaolinite is low while at pH 4.5, the adsorption capacity increases. Flocculant adsorption has been shown to be related to the amount of available surface area, pH, flocculant dosage, and the resulting floc strength, which controls the rate of new surface area exposure and hence the continuation of further adsorption. At both pH 4.5 and pH 8.5, complete adsorption is achieved at low flocculant dosages and adsorption equilibrium is achieved at high flocculant dosages after 1 day. In contrast, at intermediate flocculant dosages adsorption equilibrium is not reached over a 7-day period, due to a continuously increasing surface area.     

Preparation and characterisation of synthetic mixtures of lithium isotopes

Re-certification of the absolute isotopic composition of the natural lithium isotopic reference material (IRM), IRMM-016, requires measurements calibrated by means of synthetic mixtures of highly enriched lithium isotopes. Ten such mixtures were prepared by weighing and mixing of two well characterised, isotopically enriched, Li₂CO₃ compounds. The starting materials, 99.9981% enriched ⁶Li, and 99.9937% enriched ⁷Li, were purified by ion exchange, and the purified materials converted from LiOH to Li₂CO₃ by reaction with CO₂. Ten new mixtures were prepared by mixing different weighed amounts of these dissolved Li₂CO₃ carrier compounds. The compounds had an estimated level of impurities of 100 ± 100 μg · g^–1 (expanded uncertainty with a coverage factor of 2). In the ten mixtures, the n(⁶Li)/n(⁷Li) ratio varies from 0.025 to 14 and the achieved expanded relative uncertainty on the amount ratio prepared is typically 2 · 10^–4. These mixtures were then used to determine the correction factor, K, for mass discrimination of the measurement procedure and instrument concerned.