On Basic Constraint Qualifications for Infinite System of Convex Inequalities in Banach Spaces

The BCQ and the Abadie CQ for infinite systems of convex inequalities in Banach spaces are characterized in terms of the upper semi-continuity of the convex cones generated by the subdifferentials of active convex functions. Some relationships with other constraint qualifications such as the CPLV and the Slate condition are also studied. Applications in best approximation theory are provided.     

Microelectromagnet for magnetic manipulation in lab-on-a-chip systems

We demonstrate a simple scheme for fabrication of microelectromagnets consisting of planar spiral coils semi-encapsulated in soft magnetic yokes using conventional microfabrication techniques. The microelectromagnets are suitable for applications operating at frequencies below 250 kHz. Conventional fabrication schemes for planar microelectromagnets typically rely on five mask steps. We allow the current to flow in the soft magnetic yoke and thereby two mask steps are eliminated. We have characterized the electromagnets electrically, the results agree well with theory, and the implications arising from current flowing in the magnetic yoke are discussed. We have integrated the microelectromagnets with microfluidic channels, and demonstrated separation of commercially available magnetic beads from a fluid in a microfluidic system, i.e. a lab-on-a-chip system.     

Hydrothermal synthesis and Magnetocaloric effect of La0.5Ca0.3Sr0.2MnO3

The hydrothermal synthesis and magnetic entropy change for the perovskite manganite La_0.5Ca_0.3Sr_0.2MnO₃ have been studied. The La_0.5Ca_0.3Sr_0.2MnO₃ can be produced as phase-pure, crystalline powders in one step from solutions of metal salts in aqueous potassium hydroxide solution at a temperature of 513 K in 72 h. Scanning electron microscopy shows that the materials are made up of cuboid-shaped particles in typical dimension of 4.0×2.5×1.6 μm. Heat treatment can improve the magnetocaloric effect for the hydrothermal sample. The maximum magnetic entropy change ΔS_M for the as-prepared sample is 0.88 J kg⁻¹ K⁻¹ at 315 K for a magnetic field change of 2.0 T. It increases to 1.52 J kg⁻¹ K⁻¹, near its Curie temperature (317 K) by annealing the sample at 1473 K for 6 h. The hydrothermal synthesis method is a feasible route to prepare high-quality perovskite material for magnetic refrigeration application.     

过量Zn对β-Zn4Sb3热电性能影响的研究

采用真空熔融缓冷方法制备了单相β-Zn4Sb3以及含有过量Zn的β-Zn4Sb3块体热电材料.在300—700K的温度范围内测试了材料的电导率、Seebeck系数和热导率,研究了β-Zn4Sb3化合物中过量Zn的分布状态及其对材料热电性能的影响规律.结果表明：过量的Zn作为第二相较均匀的分布在β-Zn4Sb3的晶界上,随着Zn含量增加,材料电导率和热导率上升,Seebeck系数下降,Zn第二相的引入能有效提高材料的功率因子,Zn过量2at%的材料在700K时其ZT值达到1.10.     

300kVA高温超导变压器电流引线漏热损耗的测量

电流引线是高温超导变压器的主要外部漏热来源,它的漏热量直接影响了超导变压器的经济性能,因此,引线的设计与漏热测量一直备受关注。文中构建了一个实验方案,运用量热法测量低压引线的漏热,并将试验结果与仿真预期值进行了对比和分析,从而验证了仿真设计的正确性。     

C-V法提取SiC隐埋沟道MOSFET沟道载流子浓度

本文对用C-V法提取SiC隐埋沟道MOSFET沟道载流子浓度的方法进行了理论和实验分析. pn结的存在所造成的埋沟MOS结构C-V曲线的畸变为沟道载流子浓度的提取带来一些问题. SiC/SiO₂界面上界面态的存在也会使提取出的数值与实际数值产生偏差. 本文首先从理论上分别分析了沟道深度和界面态对沟道载流子浓度提取结果的影响，然后对两种沟道深度的埋沟MOS结构C-V曲线进行了测试，提取出了沟道掺杂浓度. 在测试中，采用不同的扫描速率，分析了界面态对提取结果的影响. 理论分析结果和实验测 关键词： C-V法 SiC 隐埋沟道MOSFET 沟道载流子浓度     

二维非正交坐标斜方格金属光子带隙结构

金属光子带隙结构在高能加速器、微波真空电子器件和太赫兹波源等方面具有重要的应用前景.基于实空间传输矩阵理论，详细研究了非正交坐标系下二维斜方格金属光子带隙结构，给出了计算横电模、横磁模完全带隙结构的一般公式，并分析了填充系数、任意斜角及金属柱横截面对带隙结构的影响.计算结果在退化为正方格情况下时，与其他方法的计算结果取得很好的一致. 关键词： 光子晶体 金属光子带隙 传输矩阵法 微波真空电子器件     

Modeling of the microwave drying process of aqueous dielectrics

We propose a thermodynamic framework for describing the microwave drying process of aqueous dielectrics based on Maxwell-Lorentz Field equations and mixture theory. Several issues are discussed such as the form of entropy equation; the constitutive relations for the macroscopic electric polarization vectors, Cauchy stresses, heat fluxes, internal momentum supplies, etc., for each component of the mixture: porous solid, water and gas in different regions; and the interfacial jump conditions between different regions in the mixture. A brief examination of the status of material frame indifference within the context of our framework is presented.