Polymeric phosphonium salts as a novel class of cationic biocides. V. Synthesis and antibacterial activity of polyesters releasing phosphonium biocides

Polyesters were prepared which retained phosphonium biocides as counter ions of sodium sulfonate moieties incorporated into the polymers, and surface antibacterial activity of the polyester films against Staphylococcus aureus and Escherichia coli was explored. These films exhibited a high surface antibacterial activity against S. aureus and E. coli, particularly against S. aureus, and the activity was affected by the structure and the compositional ratio of the phosphonium salts. Amount of the released phosphonium salts was very small, so that liberation of the phosphonium biocides can be expected to occur over a long period. Morphological changes of the cells of S. aureus and E. coli in contact with the polyester films were evaluated by scanning electron microscopy. It was found that the surface antibacterial activity of the polyester films was rather bacteriostatic than bactericidal as evidenced by no morphological changes of the bacterial cells in contact with the phosphonium biocides © 1993 John Wiley & Sons, Inc.     

Depletion flocculation of latex dispersion in ionic micellar systems

The flocculation behavior of anionic and cationic latex dispersions induced by addition of ionic surfactants with different polarities (SDS and cetyltrimethylammonium bromide (CTAB)) have been evaluated by rheological measurements. It was found that in identical polar surfactant systems with particle surfaces of SDS + anionic lattices and CTAB + cationic lattices, a weak and reversible flocculation has been observed in a limited concentration region of surfactant, which was analyzed as a repletion flocculation induced by the volume-restriction effect of the surfactant micelles. On the other hand, in oppositely charged surfactant systems (SDS + cationic lattices and CTAB + anionic lattices), the particles were flocculated strongly in a low surfactant concentration region, which will be based on the charge neutralization and hydrophobic effects from the adsorbed surfactant molecules. After the particles stabilized by the electrostatic repulsion of adsorbed surfactant layers, the system viscosity shows a weak maximum again in a limited concentration region. This weak maximum was influenced by the shear rate and has a complete reversible character, which means that this weak flocculation will be due to the depletion effect from the free micelles after saturated adsorption.     

Substrate dependence in aqueous Diels-Alder reactions of cyclohexadiene derivatives with 1,4-benzoquinone

A reactivity difference based on the position of substituents on cyclohexa-1,3- diene was observed for the title reaction. The effect of water as solvent was more distinct for 1-methyl-4-isopropylcyclohexa-1,3-diene than for 2-methyl-5-isopropylcyclohexa- 1,3-diene or non-substituted cyclohexa-1,3-diene. The effect of NaCl (salting-out) and guanidium chloride (salting-in) was also large for 1-methyl-4-isopropylcyclohexa-1,3- diene.     

Potentiometric flow-injection determination of boron by using a flow-through tetrafluoroborate ion-selective poly(vinyl chloride) membrane electrode

A highly sensitive tetrafluoroborate ion-selective poly(vinyl chloride) membrane electrode was constructed and applied to a detector in the flow-injection determination of boron. Boron at the 10 ng ml^?1 level can be determined by converting it to tetrafluoroborate ion in a flow of hydrofluoric acid. A sampling rate of 30 h^?1 was achieved with a relative standard deviation of less than 2%.     

Oxoaminium salts as initiators for cationic polymerization of vinyl monomers

Oxoaminium salt ( 1 ), derived from 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO, 2 ) by one-electron oxidation, could be an initiator for cationic polymerization of vinyl monomers such as isobutyl vinyl ether (IBVE), 2,3-dihydrofuran, p-methoxystyrene, N-vinyl pyrrolidone, etc., to give the corresponding polymers, when 1 had a low nucleophilic counter anion. Formation of the adducts of 1 and IBVE as well as ¹H-NMR and IR data suggested the formation of polymers containing N? O? C structure as the polymer head group. In the polymerization of IBVE, the effects of solvent and concentration of 1 were little observed, however the polymerization rate was dependent on temperature. Furthermore, the thermal reaction of the polymers obtained, which were regarded as prepolymers for block copolymerization and polymeric initiators for radical polymerization, was studied. For example, poly(2-benzylidene-1,3-dioxane) obtained by the polymerization of 2-benzylidene-1,3-dioxane with oxoaminium hexafluoroantimonate ( 1, X = SbF₆) was employed as an initiator for radical polymerization of MMA to give its block copolymer with PMMA. © 1993 John Wiley & Sons, Inc.     

Prodrugs of 2',3'-dideoxyinosine (DDI): improved oral bioavailability via hydrophobic esters.

Five ester prodrugs of 2'3'-dideoxyinosine (DDI) were synthesized for the purpose of improving oral bioavailability. The prodrugs, acetate (C2-DDI), octanoate (C8-DDI), stearate (C18-DDI), benzoate (Bz-DDI), and hemisuccinate (Suc-DDI) were proved to quantitatively regenerate their parent drug by enzymatic hydrolysis. Though the chemical stability of the prodrugs under acidic conditions was not improved, their solubility in water was significantly decreased by esterification, except for Suc-DDI. Bioavailability was evaluated by oral administration to rats. Two hydrophobic prodrugs (C8-DDI and Bz-DDI) showed higher absolute bioavailability (23.5% and 31.0%, respectively) than did DDI (15.2%), though that of C2-DDI (11.5%) and Suc-DDI (4.5%) was poor.     

Analysis by partial reflection spectrometry of protonated tetraphenylporphyrin adsorbed at a liquid-liquid interface

Visible reflection spectra of diprotonated meso-tetraphenylporphyrin adsorbates spontaneously formed at a dodecane-aqueous sulfuric acid interface have been measured using a home-made device comprising a prism-cell and variable-angle optics. The tilt angle of the pyrrole ring plane was estimated to be 47 degrees from the interface normal by use of an experimentally evaluated molecular density (1.20x10(-10) mol cm(-2)) of the diprotonated molecule in a monolayer form at the liquid-liquid interface. Positive and negative bands have been observed in the p-polarized partial internal reflection (p-PIR) spectra, whose band locations correspond to those in p-polarized external reflection (p-ER) spectra. Nevertheless, the bands in the p-PIR exhibited reversed sign to those of p-ER spectra. These suggest that the surface selection rule of the p-PIR spectrometry has a reversal rule of p-ER and p-PIR can also be used for the analysis of molecular orientation.     

N-Arylation of 4-fluoro-5-trimethylsilyl-1H-pyrazole

The 1,3-dipolar cycloaddition reaction of fluoro(trimethylsilyl)acetylene prepared in situ with an excess of diazomethane smoothly proceeded to give the corresponding 4-fluoro-5-trimethylsilyl-1H-pyrazole in 84% yield. The copper iodide-catalyzed N-arylation of the fluorinated pyrazole with a variety of aryl iodides afforded N-aryl-4-fluoropyrazoles as desilylation products in good to excellent yields.