Plasma Induced Graft Polymerization of Three Hydrophilic Monomers on Nylon 6,6 Fabrics for Enhancing Antistatic Property

In this study, three hydrophilic monomers; 2-acrylamido-2-methyl-1-propanesulfonic acid, 2-hydroxyethyl methacrylate, diallyldimethylammonium chloride (DADMAC) were selected and their performance as an antistatic finish on nylon 6,6 fabrics was investigated. A non-thermal, high density atmospheric pressure plasma was used to graft polymerize the monomers on nylon 6,6 fabrics. Fabrics were first treated with solutions of monomer in water, air dried and then treated with helium plasma to graft polymerize the monomer on the fiber surface. Surface resistivity values were measured before and after soxhlet extraction with water. Results showed that the DADMAC monomer provided better antistatic properties to fabrics. Further studies with DADMAC monomer were made; effects of plasma post exposure time, plasma pre-exposure time, plasma power, concentration of the monomer and existence of a crosslinker were investigated. Higher plasma power, higher concentration of the monomer and longer post exposure times all gave better antistatic properties to the nylon 6,6 fabrics. Acid dye staining, UV–Vis and FT-IR measurements were conducted and results confirmed a grafted poly-DADMAC layer on the fabric surface.     

Chaotic Dynamics of a Josephson Junction with a Ratchet Potential and Current-Modulating Damping

The chaotic dynamics of a Josephson junction with a ratchet potential and current-modulating damping are studied. Under the first-order approximation, we construct the general solution of the first-order equation whose boundedness condition contains the famous Melnikov chaotic criterion. Based on the general solution, the incomputability and unpredictability of the system’s chaotic behavior are discussed. For the case beyond perturbation conditions, the evolution of stroboscopic Poincaré sections shows that the system undergoes a quasi-periodic transition to chaos with an increasing intensity of the rf-current. Through a suitable feedback controlling strategy, the chaos can be effectively suppressed and the intensity of the controller can vary in a large range. It is also found that the current between the two separated superconductors increases monotonously in some specific parameter spaces.     

All-optical 2R-regeneration and continuous wave to pulsed signal wavelength conversion based on fiber nonlinearity

In this paper, we propose a novel all-optical 2R (re-amplification and re-shaping) regenerator based on inducing nonlinear chirp over a continuous wave probe. The regenerator also performs continuous wave to pulsed wavelength conversion. The chirp is induced in a highly nonlinear fiber by the data modulated pulsed signal that is to be regenerated. Offset filtering is employed at the output of the highly nonlinear fiber to extract the frequencies generated as a result of chirping. The regenerator performance has been evaluated with the help of bit-error-rate plots and eye diagrams at different values of optical signal to noise ratios. Apart from re-shaping and re-amplification, inclusion of the regenerator results in better resilience to amplified spontaneous emission noise.     

A note on general solution of Stokes equations

Li et al. (2015) claim that it is sufficient to use two harmonic functions to express the general solution of Stokes equations. In this paper, we demonstrate that this is not true in a general case and that we in fact need three scalar harmonic functions to represent the general solution of Stokes equations (Venkatalaxmi et al., 2004).     

Multi-frequency AOM for multi-beam laser scanning exposure system

Digital printing systems recorded on films or computer to plates (CTPs) have been required to improve their productivity and image quality. Under the circumstance, a printing technology of the multi-beam laser scanning for the drum capstan system, which is almost the same as optics configuration as the flat bed system, was developed using a newly developed multi-frequency acousto–optic modulator (AOM) as a key device instead of ultra-fast scanning devices toward a main scan direction. The multi-frequency AOM was developed with phased array-type transducers, achieving a wider bandwidth of over 160 MHz. The design consisted of a simultaneous three beams generation with interlace scan to avoid the beat effect by adjacent Doppler-shifted beams, which consequently attained the fastest recording speed of 5.0 mm/s compared with 2.0–3.0 mm/s of existing systems in those days. Furthermore, a couple of critical parameters of the multi-frequency AOM are studied, for example, a treatment of third-order intermodulation and also beat effect in connection with photosensitive media. As a result, the necessity of interlaces scanning to obtain good image quality without beat effect and also to allow a lower laser power to apply is proposed.     

Magnetic Properties of Pt-Based Nanoalloys: A Critical Review

In recent years, magnetic nanoalloys (MNAs) have attracted many attentions from all over the world, due to their potential applications in the broad fields of magneto-optics, data storage, engineering, and biology. Among these MNAs, Pt–M (M = Fe, Co, Ni) MNAs have been considered to be the most promising ones, due to their superparamagnetism and response to a magnetic field. Here, we firstly review the experimental work on the synthesis, characterization, and magnetic properties of Pt–Fe, Pt–Co, and Pt–Ni MNAs. Then, we discuss the recent theoretical work on Pt–Fe, Pt–Co, and Pt–Ni MNAs. Moreover, we also review the main applications of Pt–Fe, Pt–Co, and Pt–Ni MNAs in the fields of biology, information storage, and magnetic separation. It is found that the size, shape, and composition of Pt–Fe, Pt–Co, and Pt–Ni MNAs play a critical role on their fundamental magnetic properties from both the experimental and theoretical points of view. It is expected that this review could be a valuable resource for both experimental and theoretical researchers, who are interested in Pt-based MNAs.