Synthesis of Star-Shaped Polymers via Coordination of Bipyridyl-Terminated Polyoxyethylene with Metal Ions

Abstract

This paper describes the synthesis of various star-shaped polymers by means of complexation of bipyridyl-terminated polyoxyethylene with Ru(II) ion. Three kinds of bipyridyl-terminated polyoxyethylenes of different molecular weights were prepared from the corresponding polyoxyethylene monomethyl ethers with narrow molecular weight distributions. Bipyridyl was found to be introduced quantitatively at the end of the polymers based on the results of UV spectra. The formation of a star-shaped polymer was carried out by the reaction of RuCl₃ with three equivalents of bipyridyl-terminated polyoxyethylene. The UV spectrum of the star-shaped polymer obtained supported the formation of a typical Ru(II) tris(bipyridyl) complex. From the results of GPC, the star-shaped polymer obtained had a higher molecular weight than the pre-polymer and showed a narrow molecular weight distribution. In the case of a Ni(II) or a Co(II) complex, however, the star-shaped polymer was found to be dissociated into three linear prepolymers under the conditions of GPC measurement.     

Polymerization of Cyclic Ethers

Abstract

In the present series of studies on the cationic polymerization of cyclic ethers, the reactivities of cyclic ethers were quantified and the effect of the catalyst upon the polymerization kinetics was revealed. These kinetic analyses were successfully performed by means of our “phenoxyl end-capping method”. The change of the reactivity by the ring size of the monomer was interestingly demonstrated. In addition, it is emphasized that the frequency factor as well as the activation energy influence the rate constant of propagation. As to the effect of catalyst upon the polymerization kinetics, the most important conclusion is that the rate constant of propagation changes very little according to the changes of the catalyst components. Variation of the conversion rate by a change of catalyst is due to differences in the rates of the initiation and the termination reactions.     

Synthesis and Polymerization of Spiro Oxyphosphoranes

Novel methods of synthesis of spiro acyloxyphosphoranes are described emphasizing the significance of the first isolated instance of these new species. Then, the no-catalyst alternating copolymerizations of the combinations of cyclic phosphorus(III) compounds (serving as nucleophilic monomer, M_N) with acrylic acid derivatives and with α-keto acids (electrophilic monomer, M_E) are mentioned. These copolymerizations proceed without added initiator. Spiro oxyphosphoranes play an important role in the copolymerization scheme in the equilibrium with the ⁺M_N - M_E ^? zwitterion, the key intermediate of the copolymerization. Finally, new reactions of spiro acyloxyphosphoranes with nucleophiles, alcoholysis and aminolysis polymerizations are presented.     

Ion-Selective Electrodes Based on Bilayer Film Coating

The electrode characteristics of ion-selective electrodes (ISEs) for K⁺, Na⁺, NH₄ ⁺, and Ca²⁺ based on bilayer film coatings, where the inner layer films are electroactive electropolymerized ones and the outer layer films are composed of conventional ion-sensitive materials, have been examined. These ISEs of the coated-wire electrode type have no conventional internal reference solution and reference electrode, but the inner films may be considered to function as the “internal standard solution.” The ion selectivity coefficients and the activity range showing Nernstian response were almost comparable to those of conventional liquid-membrane electrodes. The bilayer-coated ISEs showed insensitivity to O₂ and CO₂, long-term stability, and little drift. It was also found that the electrode performance is practically unchanged after sterilization in an autoclave. The results demonstrate that the bilayer-coated ISEs examined are promising for the determination of K⁺, Na⁺, NH₄ ⁺, or Ca²⁺ activity in biological and environmental systems.     

New Preparation of Cyclic Acyloxyphosphorane by Reaction of Glyoxylic Acid with Phosphorus(III) Compounds

We have recently found that the reaction of α-keto acids (1) with phosphorus (III) compounds (3) yielded cyclic acyloxyphosphoranes(C-AOPs, 4), a new class of pentacovalent phosphorus species having a P-OC(O) group.^{1, 2)} The present paper deals with a new reaction of glyoxylic acid (2) with 3 to give C-AOPs (5) having no substituent at the C-3 position. 1 is an α-keto acid whereas 2 can be taken as an α-formyl acid. Although it is well known in the field of organic chemistry that the formyl group often behaves differently from a keto group, the reaction of 2 with 3 provides an example in which both groups behave in a similar manner.     

Synthesis of 8-Methoxycarbonyloctylβ-Glycosides of Tri-and Tetrasaccharides Related to Schizophyllan and Neoglycoproteins Therefrom

Abstract

The 8-methoxycarbonyloctyl β-glycosides of the trisaccharides O-β-d-Glcp-(1 → 6)- O-β-d-Glcp-(1 → 3)-d-Glcp and O-β-d-Glcp-(1 → 3)-O-[β-d -Glcp-(1 → 6)]-d-Glcp and of the tetrasaccharide O-β-d-Glcp-(1 → 3)-O-[β-d-Glcp-(1 → 6)]-O-β-d-Glcp-(1 → 3)-d-Glcp, corresponding to the fragments of schizophyllan, have been synthesized by using mono- to tetrasaccharide 1-thioglycosides as glycosyl donors, each bearing a participating benzoyl group in the 2-position, and N-iodosuccinimide and silver triflate as promoter. Saponification of the tri- and tetrasaccharide β-glycosides, followed by attachment to bovine serum albumin of the resulting sugar derivatives having a carboxyl group at the aglycon terminal, provided neoglycoproteins for immunological studies of the polysaccharide.     

Flow Rate Prediction for a Semi-permeable Membrane at Low Reynolds Number in a Circular Pipe

Transport in Porous Media - A concise and accurate prediction method is required for membrane permeability in chemical engineering and biological fields. As a preliminary study on this topic, we...     

Evidence and mechanisms of filling polymerization by plasma-induced graft polymerization

Using a plasma-induced graft polymerization technique, which is well known as a surface modification method, the grafted polymer was formed in pores of the porous material. This study examined the filling mechanism. Five thin porous films were sandwiched together, and employed as the substrate. The substrate was treated by plasma, and the change in surface tension and radical formation was measured for each sheet after the sheet was separated. The only surface on which surface-tension change was detected, was that of the sheet directly exposed to the plasma. Although plasma treatment made polymer radicals primarily on the outer surface of the sheet, the treatment also formed a few radicals inside the sheets. The radicals inside the sheets reacted with methylacrylate and grafted polymer formed in the pores. The location of grafted polymer depended on the balance between monomer diffusivity and reactivity. The grafting rate depended on which monomer solvent was used for the polymerization. Thus, the grafted membrane morphology could be controlled by varying the grating solvent composition. © 1996 John Wiley & Sons, Inc.     

Changes of electrochemical responses of the bulk solution species by thermotropic permeability of liquid crystalline membranes coated on electrodes

Liquid crystalline/polymer composite membrane-coated electrodes were prepared by casting a 1,2-dichloroethane solution of N-(4-ethoxybenzylidene)-4′-n-butylaniline (EBBA) and polycarbonate (PC) on an electrode surface. The temperature-dependence of the permeability of the EBBA/PC composite membrane on electrodes to Fe(CN)^3?₆ ion as a solution-phase redox ion was investigated by means of hydrodynamic voltammetry at a rotating disk electrode. The permeability changed with temperature over the range of the crystalline-nematic-phase transition temperature of EBBA. It is demonstrated that the observed temperature-dependence of the permeability reflects the thermotropic properties of EBBA in the EBBA/PC composite membrane. Furthermore, the dependence of the limiting current of the steady-state current-potential curves for the reduction of Fe(CN)^—₆ at the EBBA/PC composite membrane-coated electrode upon the membrane thickness, the blend ratio of EBBA and PC and the concentration of Fe(CN)^3?₆ in a bulk solution was examined in order to understand the transport process of Fe(CN)^?3₆ through the EBBA/PC composite membrane from the membrane/solution interface to the electrode/membrane interface. The transport process of Fe(CN)^3?₆ within the membrane was found to obey Fick's Law.