Novel phenoxyalkylamine derivatives. VII. Synthesis and pharmacological activities of 2-alkoxy-5-[(phenoxyalkylamino)alkyl]benzenesulfonamide derivatives.

To find a novel alpha-blocker with high alpha-blocking selectivity against dopamine D2-receptor affinity, we performed structural modification of the alkylene chains and the substituents on two benzene rings of 2-alkoxy-5-[(phenoxyalkylamino)alkyl]benzenesulfonamide derivatives. The modification of the alkylene chain between the amino moiety in the center of the molecule and the benzene ring (ring A) was found to be the most significant. 5-[2-[[2-(5-Fluoro-2-methoxyphenoxy)ethyl]amino]propyl]-2- methoxybenzenesulfonamide (II-4), which possesses 1-methylethyl as the alkylene chain, exhibited high alpha-blocking selectivity as well as potent alpha-blocking activity.     

Silylation of water glass. I. Solvent extraction and trimethylsilylation of silicic acid

Homogeneous trimethylsilylation of silicic acid in nonaqueous media was studied. The silylation process consisted of three steps: acidification of sodium silicate, solvent extraction. and trimethylation of silicic acid. Sodium silicate was first acidified with dilute sulfuric acid to form silicic acid: extraction followed with hydrophilic organic solvents. The Silicic acid obtained was finally allowed to react with trimethylchlorosilane to give trimethylsilylates with molecular weights of 1000–12,000. Optimum conditions for each step have been intensively sought to achieve trimethylsilylates in high yield. The trimethylsilylates exhibited excellent thermal stability and surface properties, such as water repellency and antifoaming properties, comparable to those of conventional polydimethylsiloxanes.     

Effects of Cathode and Anode on Deposition of Trimethylsilane in Glow Discharge

DC cathodic polymerization of trimethylsilane (TMS) was carried out in plasma reactors with and without using anode assembly. In DC cathodic polymerization, the TMS plasma polymers are mainly deposited on the cathode (substrate) surface. As a result, fast deposition of TMS plasma polymers was easily achieved in DC cathodic polymerization as compared with AF or RF plasma polymerization. DC cathodic polymerization without using anode assembly has its advantageous features that the size and number of substrates (as cathodes) are not restricted by the size and the location of anode assembly. It was found that the maximum deposition rate on the cathode surfaces was obtained without anode assembly. The DC cathodic polymerization of TMS was conducted also in a large volume reactor with multiple cathodes (substrates). The same deposition mechanisms for DC cathodic polymerization with a single cathode also apply to the multiple cathodes. Uniform deposition on each cathode could be obtained with appropriate spacing of multiple cathodes and by adjusting the operational parameters, which are based on the current density and the system pressure.     

Two-dimensional network formation of cardiac myocytes in agar microculture chip with 1480 nm infrared laser photo-thermal etching

We have developed a new method that enables agar microstructures to be used to cultivate cells and that allows cell network patterns to be controlled. The method makes use of non-contact three-dimensional photo-thermal etching with a 1480 nm infrared focused laser beam, which is strongly absorbed by water and agar gel, to form the shapes of agar microstructures. It allows microstructures to be easily formed in an agar layer within a few minutes, with cell-culture holes formed by the spot heating of a 100 mW laser and tunnels by the tracing of a 100 microm s(-1), 40 mW laser. We cultivated rat cardiac myocytes in adjacent microstructures and observed synchronized beating in them 90 min after they had made physical contact. Our results indicate that the system can make and use microstructures for cell-network cultivation in a minimal amount of time without any expensive microfabrication facilities or complicated procedures.     

Streptonigrin and lavendamycin partial structures. Preparation of 7-amino-2-(2′-pyridyl)quinoline-5,8-quinone-6′-carboxylic acid: A probe for the minimum,potent pharmacophore of the naturally occurring antitumor-antibiotics

The preparation of 7-amino-2-(2′-pyridyl)quinoline-5,8-quinone-6′-carboxylic acid (4) constituting a potential minimum, potent pharmacophore of streptonigrin (1) and lavendamycin (2) , two structurally-related naturally-occurring antitumor-antibiotic, is detailed. In contrast to observations associated with streptonigrin and lavendamycin in which the C-6′ acid potentiates the antitumor, antimicrobial, and cytotoxic activity of the naturally-occurring, substituted 7-aminoquinoline-5,8-quinone AB ring systems, the C-6′ carboxylic acid of 4 diminishes the observed antimicrobial and cytotoxic properties of 7-amino-2-(2′-pyridyl)quinoline-5,8-quinone.     

Ferromagnetic anomaly associated with the antiferromagnetic transitions in (donor)[Ni(mnt)2]-type charge-transfer salts

Three newly prepared [Ni(mnt)2] complexes, (HMTTF)[Ni(mnt)2], (ChSTF)[Ni(mnt)2], and (DBTTF)2[Ni(mnt)2], are reported (DBTTF = dibenzotetrathiafulvalene, ChSTF = 2,3-cyclohexylenedithio-1,4-dithia-5,8-diselanafulvalene, HMTTF = bis(trimethylene)-tetrathiafulvalene, and mnt = maleonitrile dithiolate). The former two compounds have usual DA-type (D = donor, A = acceptor) mixed stacks, whereas the DBTTF complex has DDDDAA-type 6-fold columns. These compounds are electrical insulators, but the HMTTF and ChSTF complexes exhibit chiT minima at 16 and 55 K, respectively, followed by chiT peaks at 8 and 16 K. Below these temperatures the ESR signal disappears, indicating antiferromagnetic transitions. The origin of the ferromagnetic interaction is explained either from the difference of the g values between the donor and the anion or from the intrinsic ferromagnetic interaction of the [Ni(mnt)2] anions.     

A potentiometric microbial sensor based on immobilized escherichia coli for glutamic acid

The sensor consists of immobilized E. coli (which contains glutamate decarboxylase) and a carbon dioxide gas-sensor. Continuous introduction of sample solution into a flow system incorporating the sensor gives a potential which increases until a steady state is reached after 5 min. Measurements can also be made with only a 1- or 3-min introduction period with little loss of sensitivity. Calibration plots of mV measurements vs. logarithmic glutamic acid concentration are linear in the range 100–800 mg l^-1. The sensor is highly selective, stable and reproducible. It has been applied to the determination of glutamic acid in fermentation broths.     

Efficient synthesis and hydrolysis of cyclic oxalate esters of glycols

Based on the mechanism postulated for the formation of the cyclic carbonates 3 in the reactions of glycols 1 with oxalyl chloride in the presence of triethylamine, we present here three efficient syntheses of the cyclic oxalates 2 of various glycols 1 by controlling the formation of 3: replacement of the base by pyridine markedly diminishes yields of 3 in all reactions, realizing dramatic reversals of the product ratios in the reactions with the (R*,R*)-compounds 1g-i,q,r and pinacol (1k); although considerable amounts of the oxalate polymers are formed in the reactions with some (R*,S*)-glycols, this drawback can be removed by the use of 2,4,6-collidine instead of pyridine; 1,1'-oxalyldiimidazole is useful for the synthesis of two selected cyclic oxalates 2e,f. The cyclic oxalates 2 other than trisubstituted and tetrasubstituted ones were found to be very reactive: kinetic studies on the hydrolysis of 1,4-dioxane-2,3-dione (2a) as well as its mono- and some selected 5,6-disubstituted derivatives 2 have revealed that they undergo hydrolysis 260-1500 times more rapidly than diethyl oxalate (12) in acetate buffer-acetonitrile (pH 5.69) at 25 degrees C. Although the cyclic oxalate 21 from cis-1,2-cyclopentanediol (11) was 1.5 times more reactive than 2a, it has been shown with other substrates that increasing number of the alkyl substituents decreases the rate of hydrolysis. On the contrary, the phenyl group was found to have somewhat accelerative effect.     

Alkyl Ammonium Ion Selectivity of Hexahomotrioxacalix[3]arene Triamide Derivative having the Intramolecular Hydrogen-Bonding Group

The lower rim functionalized hexahomotrioxacalix[3]arene triamide 4 with cone-conformation was synthesized from triol 1 by a stepwise reaction. The different extractability for alkali metal ions, transition metal ions, and alkyl ammonium ions from water into dichloromethane is discussed. Due to the strong intramolecular hydrogen bonding between the neighboring NH and CO groups in triamide 4, its affinity to metal cations was weakened. Triamide 4 shows a single selectivity to n-BuNH ₃ ⁺ . The anion complexation of triamide 4 was also studied by ¹H NMR titration experiments. Triamide 4 binds halides through the intermolecular hydrogen bonding among the NH hydrogens of amide in a 1:1 fashion in CDCl₃. The association constants calculated from these changes in chemical shifts of the amide protons are K _a = 223 M^?1 for Cl^? and K _a = 71.7 M^?1 for Br^?. Triamide 4 shows a preference for Cl^? complexation than Br^? complexation.     

Synthesis and Structure of a 1,3-alternate-Thiacalix[4]arene diamide Derivative

A novel receptor possessing two complexation sites and bearing 1,3-alternate conformation based on thiacalix[4]arene, confirmed by single crystal X-ray analysis, was prepared. The tetrathiacalix[4]arene diamide shows strong intramolecular hydrogen bonding. The binding behavior towards K⁺ and halides has been examined by ¹H NMR titration experiments.