Quantification of Intracellular Thiols by HPLC-Fluorescence Detection

Biothiols, such as cysteine and glutathione, play important roles in various intracellular reactions represented by the redox equilibrium against oxidative stress. In this study, a method for intracellular thiol quantification using HPLC-fluorescence detection was developed. Thiols were derivatized with a thiol-specific fluorescence derivatization reagent, viz. ammonium 7-fluoro-2,1,3-benzoxadiazole-4-sulfonate (SBD-F), followed by reversed-phase separation on an InertSustain AQ-C18 column. Six different SBD-thiols (homocysteine, cysteine, cysteinylglycine, γ-glutamylcysteine, glutathione, and N-acetylcysteine as an internal standard) were separated within 30 min using a citric buffer (pH 3.0)/MeOH mobile phase. The calibration curves of all the SBD-thiols had strong linearity (R² > 0.999). Using this developed method, the thiol concentrations of human chronic myelogenous leukemia K562 cell samples were found to be 5.5–153 pmol/1 × 10⁶ cells. The time-dependent effect of a thiol scavenger, viz. N-ethyl maleimide, on intracellular thiol concentrations was also quantified. This method is useful for elucidating the role of intracellular sulfur metabolism.     

Donor–acceptor–acceptor-type near-infrared fluorophores that contain dithienophosphole oxide and boryl groups: effect of the boryl group on the nonradiative decay

The use of donor–π–acceptor (D–π–A) skeletons is an effective strategy for the design of fluorophores with red-shifted emission. In particular, the use of amino and boryl moieties as the electron-donating and -accepting groups, respectively, can produce dyes that exhibit high fluorescence and solvatochromism. Herein, we introduce a dithienophosphole P-oxide scaffold as an acceptor–spacer to produce a boryl- and amino-substituted donor–acceptor–acceptor (D–A–A) π-system. The thus obtained fluorophores exhibit emission in the near-infrared (NIR) region, while maintaining high fluorescence quantum yields even in polar solvents (e.g. λ_em = 704 nm and Φ_F = 0.69 in CH₃CN). A comparison of these compounds with their formyl- or cyano-substituted counterparts demonstrated the importance of the boryl group for generating intense emission. The differences among these electron-accepting substituents were examined in detail using theoretical calculations, which revealed the crucial role of the boryl group in lowering the nonradiative decay rate constant by decreasing the non-adiabatic coupling in the internal conversion process. The D–A–A framework was further fine-tuned to improve the photostability. One of these D–A–A dyes was successfully used in bioimaging to visualize the blood vessels of Japanese medaka larvae and mouse brain.

Combination of electron-accepting diarylboryl terminal groups and dithienophosphole oxide spacers with electron-donating triarylamine moieties produces donor–acceptor–acceptor type π-systems, which exhibit emissions in the near-infrared region.     

Synthesis of the Carbohydrate Moiety of Glycoproteins from the Parasite Echinococcus granulosus and Their Antigenicity against Human Sera

Stereocontrolled syntheses of biotin-labeled oligosaccharide portions containing the carbohydrate moiety of glycoprotein from Echinococcus granulosus have been accomplished. Trisaccharide Galβ1-3Galβ1-3GalNAcα1-R (A), tetrasaccharide Galα1-4Galβ1-3Galβ1-3GalNAcα1-R (B), and pentasaccharide Galα1-4Galβ1-3Galβ1-3Galβ1-3GalNAcα1-R (C), (R = biotinylated probe) were synthesized by stepwise condensation and/or block synthesis by the use of 5-(methoxycarbonyl)pentyl 2-azido-4,6-O-benzylidene-2-deoxy-α-d-galactopyranoside as a common glycosyl acceptor. The synthesis of the tetrasaccharide and the pentasaccharide was improved from the viewpoint of reducing the number of synthetic steps and increasing the total yield by changing from stepwise condensation to block synthesis. Moreover, hexasaccharide E, which contains the oligosaccharide sequence which occurs in E. granulosus, was synthesized from trisaccharide D. We examined the antigenicity of these five oligosaccharides by an enzyme-linked immunosorbent assay (ELISA). Although compounds of C–E did not exhibit antigenicity against cystic echinococcosis (CE) patient sera, compounds B, D, and E showed good serodiagnostic potential for alveolar echinococcosis (AE).     

Ion polarisation-assisted hydrogen-bonded ferroelectrics in liquid crystalline domains

An alkylamide-substituted (−NHCOC₁₀H₂₁) hydrogen-bonded dibenzo[18]crown-6 derivative (1) was prepared to stabilise the ionic channel structure in a discotic hexagonal columnar (Col_h) liquid crystal. The introduction of simple M⁺X⁻ salts such as Na⁺PF₆⁻ and K⁺I⁻ into the ionic channel of 1 enhanced the ionic conductivity of the Col_h phase of the M⁺·(1)·X⁻ salts, with the highest ionic conductivity reaching ∼10⁻⁶ S cm⁻¹ for K⁺·(1)·I⁻ and Na⁺·(1)·PF₆⁻ at 460 K, which was approximately 5 orders of magnitude higher than that of 1. The introduction of non-ferroelectric 1 into the ferroelectric N,N′,N′′-tri(tetradecyl)-1,3,5-benzenetricarboxamide (3BC) elicited a ferroelectric response from the mixed Col_h phase of (3BC)_x(1)_1−x with x = 0.9 and 0.8. The further doping of M⁺X⁻ into the ferroelectric Col_h phase of (3BC)_0.9(1)_0.1 enhanced the ferroelectric polarisation assisted by ion displacement in the half-filled ionic channel for the vacant dibenzo[18]crown-6 of (3BC)_0.9[(M⁺)_0.5·(1)·(X⁻)_0.5]_0.1.

An alkylamide-substituted (−NHCOC₁₀H₂₁) hydrogen-bonded dibenzo[18]crown-6 derivative (1) was prepared to stabilise the ionic channel structure in a discotic hexagonal columnar (Col_h) liquid crystal.     

The dapE-encoded N-succinyl-l,l-diaminopimelic acid desuccinylase from Haemophilus influenzae is a dinuclear metallohydrolase

The Zn K-edge extended X-ray absorption fine structure (EXAFS) spectra, of the dapE-encoded N-succinyl-l,l-diaminopimelic acid desuccinylase (DapE) from Haemophilus influenzae have been recorded in the presence of one or two equivalents of Zn(II) (i.e. [Zn_(DapE)] and [ZnZn(DapE)]). The Fourier transforms of the Zn EXAFS are dominated by a peak at ca. 2.0 A, which can be fit for both [Zn_(DapE)] and [ZnZn(DapE)], assuming ca. 5 (N,O) scatterers at 1.96 and 1.98 A, respectively. A second-shell feature at ca. 3.34 A appears in the [ZnZn(DapE)] EXAFS spectrum but is significantly diminished in [Zn_(DapE)]. These data show that DapE contains a dinuclear Zn(II) active site. Since no X-ray crystallographic data are available for any DapE enzyme, these data provide the first glimpse at the active site of DapE enzymes. In addition, the EXAFS data for DapE incubated with two competitive inhibitors, 2-carboxyethylphosphonic acid and 5-mercaptopentanoic acid, are also presented.     

Homoleptic cyclometalated iridium complexes with highly efficient red phosphorescence and application to organic light-emitting diode

Phosphorescence studies of a series of facial homoleptic cyclometalated iridium(III) complexes have been carried out. The complexes studied have the general structure Ir(III)(C-N)(3), where (C-N) is a monoanionic cyclometalating ligand: 2-(5-methylthiophen-2-yl)pyridinato, 2-(thiophen-2-yl)-5-trifluoromethylpyridinato, 2,5-di(thiophen-2-yl)pyridinato, 2,5-di(5-methylthiophen-2-yl)pyridinato, 2-(benzo[b]thiophen-2-yl)pyridinato, 2-(9,9-dimethyl-9H-fluoren-2-yl)pyridinato, 1-phenylisoquinolinato, 1-(thiophen-2-yl)isoquinolinato, or 1-(9,9-dimethyl-9H-fluoren-2-yl)isoquinolinato. Luminescence properties of all the complexes at 298 K in toluene are as follows: quantum yields of phosphorescence Phi(p) = 0.08-0.29, emission peaks lambda(max) = 558-652 nm, and emission lifetimes tau = 0.74-4.7 micros. Bathochromic shifts of the Ir(thpy)(3) family [the complexes with 2-(thiophen-2-yl)pyridine derivatives] are observed by introducing appropriate substituents, e.g., methyl, trifluoromethyl, or thiophen-2-yl. However, Phi(p) of the red emissive complexes (lambda(max) > 600 nm) becomes small, caused by a significant decrease of the radiative rate constant, k(r). In contrast, the complexes with the 1-arylisoquinoline ligands are found to have marked red shifts of lambda(max) and very high Phi(p) (0.19-0.26). These complexes are found to possess dominantly (3)MLCT (metal-to-ligand charge transfer) excited states and have k(r) values approximately 1 order of magnitude larger than those of the Ir(thpy)(3) family. An organic light-emitting diode (OLED) device that uses Ir(1-phenylisoquinolinato)(3) as a phosphorescent dopant produces very high efficiency (external quantum efficiency eta(ex) = 10.3% and power efficiency 8.0 lm/W at 100 cd/m(2)) and pure-red emission with 1931 CIE (Commission Internationale de L'Eclairage) chromaticity coordinates (x = 0.68, y = 0.32).     

Pi-face-selective Diels-Alder reactions of 3,4-di-tert-butylthiophene 1-oxide and 1-imide and formation of 1,2-thiazetidines

3,4-Di-tert-butylthiophene 1-oxide (1a) reacted with a series of electron-deficient alkenic dienophiles at its syn-pi-face relating to the S=O bond to give [4+2] adducts in excellent yields. The 1-oxide 1a also reacted even with angle-strained dienophiles acenaphthylene and norbornene at its syn-pi-face to afford [4+2] adducts; in the latter case, norbornene reacted exclusively at its exo-pi-face. The oxide 1a reacted with dimethyl acetylenedicarboxylate to produce dimethyl 4,5-di-tert-butylphthalate in high yield with spontaneous extrusion of SO from the initial adduct even at room temperature. Similarly, 3,4-di-tert-butylthiophene 1-(p-toluenesulfonyl)imide (3a) reacted with alkenic dienophiles at its syn-pi-face relating to the S=N bond to give [4+2] adducts in good yields. The reaction of 3a with 4-phenyl-1,2,4-triazoline-3,5-dione (PTAD) afforded a 1,2-thiazetidine 12a, the first example of S-unoxidized 1,2-thiazetidine, in good yield, through rearrangement of the initial [4+2] adduct. The molecular structure of 12a is discussed on the basis of the X-ray crystallographic analysis. Comparison of the foregoing reactions leads to the conclusion that the 1-oxide 1a is more reactive as a diene than the 1-imide 3a, which is more reactive than 3,4-di-tert-butylthiophene 1,1-dioxide. The origin of the syn-pi-face selectivities of 1a and 3a in Diels-Alder reactions is discussed in terms of the orbital mixing rule and steric effect and also based on B3LYP/6-31G(d) calculations.     

Reductive activation of dioxygen by a myoglobin reconstituted with a flavohemin

We successfully converted myoglobin, an oxygen-storage hemoprotein, into an oxygen-activating hemoprotein like cytochrome P450s by replacing the native hemin with the artificially created flavohemin. The reconstituted myoglobin, rMb(1), was chacterized by ESI-TOF-mass, UV-vis, and fluorescence spectra. The 1H NMR spectrum of cyanomet rMb(1) indicates that two hemin conformers are present in a ratio of 1:1. Upon the addition of NADH to the buffer solution of rMb(1) in the presence of SOD and catalase, the oxymyoglobin was rapidly formed. As compared with the formation of the oxygenated native myoglobin in the presence of 10-N-(acetylaminoethyl)isoalloxazine, the rate constant of the oxyheme formation in rMb(1) is 6 times larger. This is because the flavin covalently linked to the terminal heme propionate functions as an effective mediator of an electron transfer from NADH to the hemin in rMb(1). Furthermore, rMb(1) shows the deformylation activity, when 2-phenylpropionaldehyde (2-PPA) was employed as a substrate. This result indicates that the oxyheme is reductively activated to Fe(III)-peroxoanion (Fe(III)-O22-). The result in this report is the first example of the activation of dioxygen by myoglobin. This study shows the utility of the replacement of the native hemin with a chemically modified one for the functionalization of myoglobin.     

The effect of the counteranion on the formation of mesoporous materials under the acidic synthesis process

The presence of various counteranions at the interfacial region of the silicate-surfactant mesophase introduces opportunities for manipulation of the phase structure. Well-ordered 3D-hexagonal P63/mmc, cubic Pmn, 2D-hexagonal p6mm, and cubic Iad mesoporous materials have been synthesized with the same surfactant, cetyltriethylammonium bromide, in the presence of various acids. The counteranions of acidic media have resulted in increasing the surfactant packing parameter g in the order SO42- < Cl- < Br- < NO3-, which leads to the different time course of formation of mesostructures. The effect of counteranions on the formation of mesostructures is explained in terms of not only the adsorption strength on the headgroups of the surfactant micelle but also the rate of silica condensation affecting the charge density matching between the surfactant and silica. It has been found that the mesophase is always transformed from the larger g parameter into the smaller one. The distinct morphologies of the 3D-hexagonal P63/mmc mesophases have been rationally explained by supposing this particular mesostructure. The cubic Iad phase has been first synthesized under acidic conditions.