Polymerization of methacrylates. I. Polymerization reactivity of picryl methacrylate

The polymerization of picryl (PMA), 2,4-dinitrophenyl (2,4-DNMA),2,6-dinitrophenyl (2,6-DNMA), 2-methyl-4,6-dinitrophenyl (MDNMA), and 2,6-dimethylphenyl methacrylates (DMMA) was carried out in benzene at 60°C. PMA, 2,6-DNMA, and MDNMA did not undergo radical homopolymerization, while 2,4-DNMA and DMMA did. The results suggest that the growing radical readily attacks the oxygen atom of the nitro group at the 2 position of the terminal phenyl group due to the steric effect of the substituent at the 6 position, resulting in chain termination. PMA formed a charge-transfer complex with 2-naphthyl methacrylate (NMA). The stoichiometric composition of this complex was shown to be 1:1 molar complex. PMA was readily copolymerized with NMA. The amount of solvent affected the composition of the copolymer obtained at a given same mole fraction in feed. The results suggest that charge-transfer interaction between the ester groups affects the copolymerization mechanism.     

Electron spin resonance of hydrogen-absorbed graphite-potassium intercalation compounds

The conduction electron spin resonance (CESR) of the graphite—potassium intercalation compounds, C₈ K and C₂₄ K, was studied in hydrogen gas. An enhancement of CESR absorption and a decrease in asymmetry parameter were observed for C₈K in the initial stage of hydrogen absorption, attributed to paramagnetic hydrogen atoms stabilized in the matrix of the compound.     

Extraction—spectrophotometric determination of trace amounts of iron in waters with pyrogallol red and zephiramine

The simple removal of excess of co-extracted reagent in the solvent extraction of metal complex anions with a quaternary ammonium salt greatly improves the determination of iron(II) with pyrogallol red and zephiramine. The method with pyrogallol red is suitable for the determination of trace amounts of iron in natural waters. The apparent molar absorptivities of the iron(II) complex in chloroform are 7.5×10⁴ and 10.3×10⁴ 1 mol^-1 cm^-1 at 560 and 298 nm, respectively. A large excess of reagent can be added, and the ternary complex can be completely extracted over the pH range 8.5–10. Masking agents allow most interferences to be suppressed. The method is suitable for the analysis of potable, river and sea waters.     

Benzoyl(acetylacetonato)nickel(II) complexes containing tertiary phosphine ligands. Their synthesis,dynamic behavior in solution,and decarbonylation

Carbon monoxide is readily inserted into the phenyl—nickel bond of PhNi(acac)(PR₃)_n to give benzoylnickel complexes, PhCONi(acac)PR₃ (R = Ph, Et, cyclo-C₆H₁₁), which were characterized by elemental analysis, IR and NMR spectroscopy, as well as chemical reactions. The reactions of the benzoylnickel complexes with methyl iodide and alcohols give acetophenone and corresponding benzoates, respectively, accompanied by some decomposition reactions. The solid benzoylnickel complexes when heated at elevated temperatures are decarbonylated and biphenyl, benzophenone and carbon monoxide are liberated. The dynamic behavior of the acac ligand in acetone solution was studied and the activation parameters for the acac exchange reactions were obtained. The decarbonylation reaction of the benzoyl complex PhCONi(acac)PPh₃ in acetone was studied by NMR, and found to be first order in the benzoylnickel complex.     

Optical rotary dispersion of nitrobenzene derivatives—IV : Absolute conformation of twisted nitrobenzen derivatives and its control through conformational transmission

The origin of Cotton effect shown by o-nitrobenzoyl esters is discussed. The Cotton effect observed for 1-(?)-methyl ester of 3-nitrophalic acid and 4-nitrohemimellitic acid (6 and 12), indicated that the favoured twisting direction of the nitrobenzene moiety is determined by the asymmetric menthyl group through the intervening carboxyl groups. This provides a new concept in conformational analysis of aromatic compounds. Extending the concept of conformational transmission to 2,2′-dinitrobipenhyl derivatives with known ab twisted nitrobenzene was related to the sign of the Cotton effect at 330 nm in accordance with the result of X-ray crystal analysis 1-(?)-menthyl 4-bromo-2-nitrobenzoate (1)     

Organization and polysaccharides of sponge aggregation factor.

Aggregation factor, the macromolecular complex which mediates species-specific aggregation of dissociated sponge cells, was isolated from several species, partially characterized, and visualized by electron microscopy. All factors were large fibrous complexes with a backbone and side chains or arms. In some factors, the backbone is linear. In others it is circular and the complex appears as a sunburst with arms extending like rays from the circle. The size and location of the polysaccharide chains have been studied using purified preparations of Microciona prolifera. "Sunbursts" treated with ethylenediaminetraacetate (EDTA) for 4 weeks at 0 degrees C dissociate into 3 protein- and polysaccharide-containing components. Sodium dodecyl sulfate does not cause the sunburst to dissociate nor does it inhibit dissociation in the presence of EDTA suggesting that dissociation is not due to hydrolytic enzymes. The dissociation products were fractionated on a 977-A pore size micropore glass column. Fifteen percent of the material is excluded and appears in the electron microscope as the central circle of the sunburst. Digestion of the circles with 10(-3) M dithiothreitol (DTT) and 0.5 mg/ml proteinase K for 72 h at 37 degrees C produces 2 polysaccharide chains of 65,000 and 6,000 daltons as fractionated and sized on a 233-A pore size micropore glass column using Pharmacia dextrans as standards. The included fractions of the EDTA-treated material are subunits of the arms which contain 70% of the polysaccharide. A single polysaccharide of 6,000 daltons as measured on 233-A size glass beads and Sephadex G-75 is released from these subunits by proteinase digestion. Pharmacia dextrans are used as standard on both columns. We calculate that there would be four 65,000-dalton chains and one hundred 6,000-dalton chains per circle and fifty 6,000-dalton chains per arm. The third component of the EDTA-treated preparation is partially included on the column. It appears as linear fibrils in the electron microscope and contains polydisperse polysaccharides of several-hundred-thousand daltons. It may be an impurity since there is apparently less than 1 of the large polysaccharide chains per sunburst.     

Theoretical study of benzonitrile clusters in the gas phase and their adsorption onto a Au(111) surface

We made theoretical calculations for a benzonitrile molecule and its clusters in the gas phase and as adsorbed on the Au(111) surface, to explain the observation by scanning tunneling microscope, that is, the trimer formation of cyanophenyl porphyrins adsorbed onto the Au(111) surface. With regard to the gas-phase species, ab initio calculations showed that (1) the benzonitrile dimer has a single stable structure that is planar and antiparallel; (2) the trimer has two isoenergetic stable structures, that is, a planar and cyclic structure and an antiparallel and nonplanar one; (3) the clusters are more stable, at low temperatures, than the monomer. For the adsorbed species, we made quantum mechanical/molecular mechanical calculations in which the interaction between the adsorbates and the surface is evaluated in a molecular-mechanical way by using analytical potential functions and an image charge model. Because the stable structures were found to be similar to those in the gas phase, the cluster formation of adsorbed cyanophenyl porphyrins was attributed to the interaction between cyanophenyl groups, which is barely affected by adsorbate-surface interaction. It was also found that the adsorbed cyclic benzonitrile trimer is more stable than the monomer and the dimer because the relative stability is dependent on enthalpy alone. We therefore concluded that the preferential formation of trimers by the adsorbed cyanophenyl porphyrins is due to the negligible contribution of entropy to the relative stability of the adsorbed species and that the adsorption hardly changes the situation found in the gas phase.     

Blue myoglobin reconstituted with an iron porphycene shows extremely high oxygen affinity

Myoglobin will be a good scaffold for engineering a function into proteins. To modulate the physiological function of myoglobin, almost all approaches have been demonstrated by site-directed mutagenesis, however, there are few studies which show a significant improvement in the function. In contrast, we focused on the replacement of heme in the protein with an artificial prosthetic group. Recently, we prepared a novel myoglobin reconstituted with an iron porphycene as a structural isomer of mesoheme. The bluish colored reconstituted myoglobin is relatively stable and the deoxymyoglobin reversibly binds ligands. Interestingly, the O2 affinity of the reconstituted myoglobin, 1.1 x 109 M-1, is a significant 1,400-fold higher than that of the native myoglobin. Furthermore, the unfavorable autoxidation kinetics show 7-fold decrease in rate for the reconstituted myoglobin relative to the native myoglobin, indicating the stable oxy-form against autoxidation. The net results come from the slow dissociation of the O2 ligand in the reconstituted myoglobin, koff = 0.11 s-1, because of the formation of strong hydrogen bond between His64 and negatively charged dioxygen. The present study indicates that the replacement of native heme with an artificially created prosthetic group will give us a unique function into a hemoprotein.     

Microbiological synthesis of 16-ketopregnanes from steroidal sapogenins

Incubation of diosgenone (1, 25D-spirost-4-en-3-one) with Verticillium theobromae (Turconi) Mason et Hughes (CBS) afforded 20α-hydroxypregn-4<ne-3,16-dione (3) and 3α,11β,20α-trihydroxy-5α-pregnan-16-one (4). The same transformation products were also obtained by the use of Stachylidium bicolor Link (IFO 6647). Isolation and identification processes of the products are discussed.     

On the topology of compact smooth three-dimensional Levi-flat hypersurfaces

We study topological conditions that must be satisfied by a compactC ^∞ Levi-flat hypersurface in a two-dimensional complex manifold, as well as related questions about the holonomy of Levi-flat hypersurfaces. As a consequence of our work, we show that no two-dimensional complex manifold admits a subdomain Ω with compact nonemptyC ^∞ boundary such that Ω ? ?².