Investigation of the Declared Value of Selenium in Food Supplements by HG-AFS

The method of hydride generation atomic fluorescence spectrometry (HG-AFS) was optimised for determination of selenium in food supplements. Due to the high and varied content of Cu, Mg and Zn in the samples, the standard addition method was found to be the most appropriate. The reliability of the method was checked by the independent method of radiochemical neutron activation analysis, and good agreement was found between the two methods. HG-AFS is simple and rapid for Se determination in food supplements based on minerals. Agreement between the selenium values found and declared was worse than 10% in 9 out of 13 supplements. Furthermore, 2 of the 14 supplements did not comply with the recommendations stated in the 27^th edition of the U.S. Pharmacopoeia, which states that minerals and vitamins in food supplements should be in the range of 90 and 200% of the declared value.     

Coulometrische Wismutometrie

Zusammenfassung Durch elektrolytische Oxydation einer Bi-Anode in gesättigter NaCl-Lösung können Bi³⁺-Ionen in Lösung gebracht werden. Dieser Prozeß ermöglicht die coulometrische Bestimmung anwesender Anionen, die schwerlösliche Bi-Verbindungen bilden.Es wurden Semimikro- und Mikrobestimmungen von Phosphationen durch elektrolytisch erzeugte Bi³⁺-Ionen bei konstanter Stromstärke ausgeführt. Die Endpunktbestimmung erfolgte amperometrisch bei konstantem Potential mit einer Indikatorelektrode — tropfende Quecksilberelektrode — und mit einer gesättigten Kalomelelektrode als Bezugselektrode. Die coulometrische Wismutometrie bietet eine weitere Möglichkeit der coulometrischen Eichung volumetrischer Lösungen im Sinne des seinerzeitigen Vorschlags vonTutundi.

---

Summary Bi³⁺ ions can be brought into solution through electrolytic oxidation of a Bi-anode in saturated NaCl solution. This process makes possible the coulometric determination of the anions present that yield difficulty soluble bismuth compounds.Semimicro- and micro-determinations of phosphate ions were made via Bi³⁺-ions produced electrolytically at constant current strength. The endpoint was determined amperometrically at constant potential with an indicator electrode-dropping mercury electrode-and with a saturated calomel electrode as reference electrode. The coulometric bismuthometry affords a further possibility of the coulometric standardization of volumetric solutions in the sense of the proposal previously advanced byTutundi.

---

Résumé On peut utiliser les ions Bi³⁺ en solution par oxydation électrolytique d'une anode en bismuth, en solution de chlorure de sodium saturée. Ce procédé permet le dosage coulométrique des anions présents qui forment des composés peu solubles avec le bismuth.On a mis au point le dosage semimicro et micro des ions phosphates par les ions Bi³⁺ formés électrolytiquement sous intensité constante. On détermine par ampérométrie le point équivalent à potentiel constant à l'aide d'une électrode indicatrice — électrode de mercure à goutte pendante —et avec une électrode au calomel saturée comme électrode de référence. La «bismuthométrie» coulométrique offre de grandes possibilités pour l'étalonnage coulométrique de solutions volumétriques, suivant l'idée queTutundi a émise en son temps.

---

---

Vorgetragen beim Symposium für analytische Chemie in Graz, 29. September bis 1. Oktober 1965.

---

Wir danken Herrn Dipl.-Ing.Vladimir Pantovi für seine Hilfe bei unserer experimentellen Arbeit.     

Partial Least-Squares Study of the Effects of Organic Modifier and Physicochemical Properties on the Retention of Some Thiazoles

JPC – Journal of Planar Chromatography – Modern TLC - Reversed-phase (RP) HPTLC with aqueous ammonia-organic modifier (acetonitrile, dioxane, acetone) mobile phases has been used to...     

Flow injection analysis : Part VI. The determination of phosphate and chloride in blood serum by dialysis and sample dilution

The rapid determination of chloride and inorganic phosphate in blood serum based on continuous flow spectrophotometry was adapted to Flow Injection Analysis by applying dialysis as well as differential dilution of the injected samples. In addition to the manual injection procedure, an automated microsampling unit was developed and used. By continuous dialysis, chloride could be determined reproducibly at a sampling rate of 125 samples per hour at sample volumes of 60 μl or less. A similar sampling rate and high precision were obtained for the determination of inorganic phosphate by using differential dilution.     

Flow injection analysis. principles,applications and trends

The basic principles of Flow Injection Analysis are outlined. The parameters governing the dispersion of the injected sample zone in the system are discussed, and it is demonstrated how these parameters can be manipulated in order to suit the requirements of an individual analytical procedure. A number of examples illustrating the practical application of f.i.a. are described, comprising the use of automated, stopped-flow, merging-zones, extraction techniques as well as f.i.a. scanning and methods based on intermittent pumping. Updated lists on f.i.a. procedures published and species that can be determined by f.i.a. are included.     

Comparison of the Temperature Effect on the π∗←n and π∗←π Electronic Transition Bands of NO<Subscript>3</Subscript><Superscript>−</Superscript>(aq)

The effect of temperature on the π∗←π transition band in the UV absorption spectrum of NO₃⁻(aq) centered at ≈200 nm was studied in the temperature range 10–70 ^∘C. The observed temperature independence of this band was in contrast to the significant influence of temperature on the nitrate π∗←n transition reported recently by us. However, taking into account the electronic states involved in both the transitions, it was concluded that this finding was in accordance with our previous assumption that interconversion between spectrally distinct (with respect to π∗←n band) nitrate species included the rupture/formation of hydrogen bond(s) in the hydration shell of the nitrate ion.     

Conductivity Studies of Dilute Aqueous Solutions of Oxalic Acid and Neutral Oxalates of Sodium, Potassium, Cesium, and Ammonium from 5 to 35°C

Conductivity measurements of oxalic acid and neutral oxalates (disodium oxalate, dipotassium oxalate, dicesium, and diammonium oxalate) were performed on dilute aqueous solutions, c < 3 × 10^–3 mol-dm^–3, from 5 to 35°C. These data and those available from the literature were analyzed in terms of dissociation steps of oxalic acid, the Onsager conductivity equation for neutral oxalates, the Quint–Viallard conductivity equation for the acid, and the Debye–Hückel equation for activity coefficients, to give the limiting equivalent conductances of bioxalate anion ;(HC₂O₄ ^–) and oxalate anion (1/2C₂O₄ ^2–) and the corresponding dissociation constants K ₁ and K ₂.     

Pulse plating effect on microstructure and corrosion properties of Zn–Ni alloy coatings

The influence of pulse plating parameters on the surface morphology, grain size, lattice imperfection and corrosion properties of Zn–Ni alloy has been studied. The coatings were electrodeposited in an alkaline cyanide-free solution. AFM was applied for surface morphology examination, XRD measurements were carried out for phase composition and texture analysis, electron probe microanalysis was used for alloy chemical composition studies, while electrochemical techniques were applied for corrosion performance evaluation. The pulse plated Zn–Ni coatings appeared to consist of the γ-Zn₂₁Ni₅ phase and the composition of the alloy depended on the plating parameters. The grain size, lattice imperfection and homogeneity of grain distribution were established to be the main factors determining corrosion behaviour of the coating. Presented at the 4th Baltic Conference on Electrochemistry, Greifswald, March 13–16, 2005     

Some new ring-D seco steroids

The Beckmann fragmentation product, 3-methoxy-17-oxo-16,17-secoestra-1,3,5(10)-trien-16-nitrile (2) has been reduced by LAH giving the expected 3-methoxy-17-hydroxy-16,17-secoestra-1,3,5(10-trien-16-amine hydrochloride (3) and 3-methoxy-17-oxa-D-homoestra-1,3,5(10)-trien-16-ol (4), by a presumed neighbouring group participation of 17-OH group in the intermediary formed 16-imino derivative (A). The structure of 4 has been proved by an alternative synthetic route by reducing 3-methoxy-17-oxa-D-homoestra-1,3,5(10)-trien-16-one (7) with di-iso-butylaluminium hydride.     

The first decade of flow injection analysis: from serial assay to diagnostic tool

Some 804 papers on flow injection analysis published to the end of May 1985 are summarized. Past trends are discussed and new developments are briefly outlined.The paper entitled “Flow Injection Analysis. Part 1. A New Concept of Fast Continuous Flow Analysis” [1], which appeared in August 1975, was the first of some 804 papers [1/2-804] published on flow injection analysis (f.i.a.) during the past ten years. In the present contribution, all these papers are collected to record the status quo of the general method and to reveal the present trends in applications of f.i.a. and in the geographical distribution of the research activities. Important concepts and technological innovations are reviewed and the future development of f.i.a. is briefly outlined.