Interaction of Metal–Dipeptide Complex with Ninhydrin in the Absence and Presence of Conventional CTAB Surfactant

The present work is aimed at studying the interaction between copper-glycyltyrosine [(Cu(II)-Gly-Tyr)]⁺ and ninhydrin in water and in micelles formed by cetyltrimethylammonium bromide (CTAB) using spectrophometric measurements at 80°C and pH 5.0. The order of reaction remains the same in the two systems, that is, first- and fractional-order kinetics with respect to [Cu(II)-Gly-Tyr]⁺ and [ninhydrin], respectively, in the excess of ninhydrin over [Cu(II)-Gly-Tyr]⁺. It was observed that the product formed is same in both the media. The reaction is catalyzed by CTAB, and the maximum rate enhancement is about three fold. Quantitative kinetic analysis of k_ψ–[CTAB] data was explained in terms of pseudo-phase of the micelles (assuming the association/incorporation of both the reactants at the micellar surface).     

Determination of total arsenic in soil and arsenic-resistant bacteria from selected ground water in Kandal Province, Cambodia

Cambodia has geological environments conducive to generation of high-arsenic groundwater and people are at high risk of chronic arsenic exposure. The aims of this study are to investigate the concentration of total arsenic and to isolate and identify arsenic-resistant bacteria from selected locations in Kandal Province, Cambodia. The INAA technique was used to measure the concentration of total arsenic in soils. The arsenic concentrations in soils were above permissible 5 mg/kg, ranging from 5.34 to 27.81 mg/kg. Bacteria resistant to arsenic from two arsenic-contaminated wells in Preak Russey were isolated by enrichment method in nutrient broth (NB). Colonies isolated from NB was then grown on minimal salt media (MSM) added with arsenic at increasing concentrations of 10, 20, 30, 50, 100 and 250 ppm. Two isolates that can tolerate 750 ppm of arsenic were identified as Enterobacter agglomerans and Acinetobacter lwoffii based on a series of biochemical, physiological and morphological analysis. Optimum growth of both isolates ranged from pH 6.6 to 7.0 and 30–35 °C. E. agglomerans and A. lwoffii were able to remove 66.4 and 64.1 % of arsenic, respectively at the initial concentration of 750 ppm, within 72 h of incubation. Using energy dispersive X-ray technique, the percentage of arsenic absorbed by E. agglomerans and A. lwoffii was 0.09 and 0.15 %, respectively. This study suggested that arsenic-resistant E. agglomerans and A. lwoffii removed arsenic from media due to their ability to absorb arsenic.     

Activation cross-sections of longer lived products of proton induced nuclear reactions on cobalt up to 70 MeV

As a part of our series of studies on charged particle induced reactions on various target materials, proton induced excitation functions on natural cobalt have been determined by using the stacked-foil technique. In these measurements the radionuclides ^55,56,57,58Co, ⁵¹Cr, ^52,54,56Mn and ^56,57Ni have been identified. For the above mentioned nuclides the cross-sections were derived from the measured activities and were compared with the literature data and with the results of EMPIRE code calculations and tabulated values in the TENDL 2011 library (based on TALYS code calculations). The agreement with previous measurements and with theoretical values was acceptable.     

Comparison of BOD optical fiber biosensors based on different microorganisms immobilized in ormosil matrixes

Fiber-optical microbial sensors for determination of biochemical oxygen demand (BOD) are described. Sensing films consisting of layers of an oxygen-sensitive fluorescent material and two different kinds of seawater microorganisms immobilized in poly(vinyl alcohol) sol–gel matrix were investigated. Tris(4,7-diphenyl-1,10-phenanthroline)ruthenium(II) perchlorate was used as the oxygen fluorescent quenching indicator. After preconditioning, the BOD biosensors could consistently perform well for up to one month. For films of domestic bacilli and films of sieved bacteria from seawater, the linear fluctuant coefficients (R ²) in the range of 4–200?mg/L were 0.9975 and 0.9783 when a glucose/glutamate BOD standard was applied. The relative error of standard deviations for the two microorganism-immobilized BOD sensing films were within 4%?and 2%?of the mean value, respectively. The effects of temperature, pH and sodium chloride concentration on the two microbial films were also studied. For low biochemical oxygen demand, a film of sieved bacteria from seawater had superior sensitivity and is expected to be developed further.     

A Designed 5‐Fluorouracil‐Based Bridged Silsesquioxane as an Autonomous Acid‐Triggered Drug‐Delivery System

Two new prodrugs, bearing two and three 5‐fluorouracil (5‐FU) units, respectively, have been synthesized and were shown to efficiently treat human breast cancer cells. In addition to 5‐FU, they were intended to form complexes through H‐bonds to an organo‐bridged silane prior to hydrolysis‐condensation through sol–gel processes to construct acid‐responsive bridged silsesquioxanes (BS). Whereas 5‐FU itself and the prodrug bearing two 5‐FU units completely leached out from the corresponding materials, the prodrug bearing three 5‐FU units was successfully maintained in the resulting BS. Solid‐state NMR (²⁹Si and ¹³C) spectroscopy show that the organic fragments of the organo‐bridged silane are retained in the hybrid through covalent bonding and the ¹H NMR spectroscopic analysis provides evidence for the hydrogen‐bonding interactions between the prodrug bearing three 5‐FU units and the triazine‐based hybrid matrix. The complex in the BS is not affected under neutral medium and operates under acidic conditions even under pH as high as 5 to deliver the drug as demonstrated by HPLC analysis and confirmed by FTIR and ¹³C NMR spectroscopic studies. Such functional BS are promising materials as carriers to avoid the side effects of the anticancer drug 5‐FU thanks to a controlled and targeted drug delivery.     

Purity assessment for avoparcin

Well-characterized pure-substance reference materials for the use as calibrants are essential to establish the metrological traceability of the results of chemical measurements. Normally, the characterization of this type of reference material is conducted through a thorough purity assessment of the compound concerned. For this reason, studies on purity assessment, especially for neat organic compounds, continues as an important part of work being undertaken by metrological institutions around the world. Among others, the need for certified pure reference standards continues to increase for residues analysis in foods, particularly for those compounds which have been banned for food safety reasons, but their residues in foods are still monitored under food surveillance program in many countries. In this respect, avoparcin serves as a very good example where testing laboratories have difficulties in obtaining traceable and comparable results on determination of avoparcin in food matrix samples due, in part, to the unavailability of certified pure-substance reference material as calibrant. In this study, it was attempted to assess the purity of a commercially available test material of avoparcin using the mass balance approach. The objective of this paper is to share the difficulties encountered during the course of purity assessment and how they were addressed. As expected, the most challenging part of work was to identify and estimate the amount of unknown impurities, both organic and inorganic-related ones, given the chemical structure and properties of avoparcin. For instance, avoparcin exists in two forms in the test material, i.e., α- and β-avoparcin, and they were found to be susceptible to hydrolysis under certain conditions.     

Challenges and strategies in the preparation of large‐volume polymer‐based monolithic chromatography adsorbents

To date, the number of published reports on the large‐volume preparation of polymer‐based monolithic chromatography adsorbents is still lacking and is of great importance. Many critical factors need to be considered when manufacturing a large‐volume polymer‐based monolith for chromatographic applications. Structural integrity, validity, and repeatability are thought to be the key factors determining the usability of a large‐volume monolith in a separation process. In this review, we focus on problems and solutions pertaining to heat dissipation, pore size distribution, “wall channel” effect, and mechanical strength in monolith preparation. A template‐based method comprising sacrificial and nonsacrificial techniques is possibly the method of choice due to its precise control over the porous structure. However, additional expensive steps are usually required for the template removal. Other strategies in monolith preparation are also discussed.     

Carbon‐Coated LiTi2(PO4)3: An Ideal Insertion Host for Lithium‐Ion and Sodium‐Ion Batteries

We report the extraordinary performance of carbon‐coated sodium super ion conductor (NASICON)‐type LiTi₂(PO₄)₃ as an ideal host matrix for reversible insertion of both Li and Na ions. The NASICON‐type compound was prepared by means of a Pechini‐type polymerizable complex method and was subsequently carbon coated. Several characterization techniques such as XRD, thermogravimetric analysis (TGA), field‐emission (FE) SEM, TEM, and Raman analysis were used to study the physicochemical properties. Both guest species underwent a two‐phase insertion mechanism during the charge/discharge process that was clearly evidenced from galvanostatic and cyclic voltammetric studies. Unlike that of Li (≈1.5 moles of Li), Na insertion exhibits better reversibility (≈1.59 moles of Na) while experiencing a slightly higher capacity fade (≈8 % higher than Li) and polarization (780 mV) than Li. However, excellent rate capability profiles were noted for Na insertion relative to its counterpart Li. Overall, the Na insertion properties were found to be superior relative to Li insertion, which makes carbon‐coated NASICON‐type LiTi₂(PO₄)₃ hosts attractive for the development of next‐generation batteries.