Simultaneous extraction and preconcentration of copper,silver and palladium with modified alumina and their determination by electrothermal atomic absorption spectrometry

In the present work,an easy solid phase extraction method using alumina modified with polyethylenimine as a new adsorbent was applied to the simultaneous extraction of copper,silver,and palladium ions prior to their determination with electrothermal atomic absorption spectrometry.The analytical procedure involved the complex formation of these cations with polyethylenimine as a chelating agent in buffer media of pH 7.0.Under the optimum conditions,a preconcentration factor of200,150,and 200,precision of ±5.4%,±4.7%,and ±5.2%and linear calibration ranges of 15.0-140,4.0-93,and 7.5-125 ng/L(in original solution) for Cu,Ag,and Pd were obtained,respectively.Also detection limits of3.9,1.1,and 2.0 ng/L were obtained for Cu,Ag,and Pd,respectively.The proposed method was applied to the determination of copper,silver,and palladium in some real samples with satisfactory results.     

Large-Signal Performance of the Serially Cascaded Electroabsorption Modulator

Large signal analysis of the serially cascaded electroabsorption modulator driven by a multisinusoidal RF signal is presented. The special case of a two-tone equal-amplitude RF signal is considered in detail, and the results are compared with previously published results.     

Large Signal Analysis of Multiquantum Well Electroabsorption Modulators

Large signal analysis of the multiple-quantum-well electroabsorption modulators driven by a mutisinusoidal RF signal is presented. The special case of a two-tone equal-amplitude RF signal is considered in detail and the results are compared with previously published results.     

Synthesis of 3-aminoisoxazolmethylnaphthols via one-pot three-component reaction under solvent-free conditions

A one-pot three-component condensation reaction of 3-amino-5-methylisoxazole, aryl aldehyde and 2-naphthol to afford the corresponding 3-amino isoxazolmethylnaphthols in good to excellent yields. The remarkable features of this new procedure are high conversions, clean reaction condition, short reaction time, nonhazardous and environmentally friendly reaction condition, inexpensive and easily commercially availability of the catalyst and simple work-up procedures.     

Preconcentration of trace nickel with the ion pair of disodium 1-nitroso-2-naphthol-3,6-disulfonate and tetradecyldimethylbenzylammonium chloride on microcrystalline naphthalene or by the column method and determination by third derivative spectrophotometry

Nickel is quantitatively retained by disodium 1-nitroso-2-naphthol-3,6-disulfonate (nitroso-R salt) and tetradecyldimethylbenzylammonium chloride (TDBA(+)Cl(-)) on microcrystalline naphthalene in the pH range 5.4-12.1 from large volumes of aqueous solutions of various alloys and biological samples. After filtration, the solid mass consisting of the nickel complex and naphthalene was dissolved with 5 ml of dimethylformamide (DMF) and the metal was determined by third derivative spectrophotometry. Nickel complex can alternatively be quantitatively adsorbed on tetradecyldimethylbenzylammonium-naphthalene adsorbent packed in a column and determined similarly. The detection limit is 10 ppb (signal to noise ratio 2) and the calibration curve is linear from 30 to 5.4x10(3) ppb in dimethylformamide solution with a correlation coefficient of 0.9997 by measuring the distance d(3)A/dlambda(3) between lambda(1) (537 nm) and lambda(2) (507 nm). Eight replicated determinations of 2.5 mug of nickel in 5 ml of dimethylformamide solution gave a mean intensity (peak-to-peak signal between lambda(1) and lambda(2)) of 0.339 with a relative standard deviation of +/-0.87%. The sensitivity of the method is 0.677 ml/mug found from the slope (d(3)A/dnm(3)) of the calibration curve. Various parameters such as the effect of pH, volume of aqueous phase and interference of a number of metal ions on the determination of nickel has been studied in detail to optimize the conditions for nickel determination in various alloys and biological samples.     

Determination of pKa values for (E)-2-hydroxy-5-(aryldiazenyl) benzaldehydes in dimethyl sulfoxide: Cyclic voltammetry and density functional theory calculations

The (E)-2-hydroxy-5-(aryldiazenyl) benzaldehydes (azo dyes 1–4 ) were synthesized in high purity. As they are insoluble in water, the usual analytical methods cannot be utilized to determine their pK_a values. Cyclic voltammetry was experimentally used to determine their pKa values in DMSO solvent. In addition, computational methods and a conductor-like screening model (COSMO) were used to calculate the solvent effect. , , K_exchange, and pK_a values were estimated for the azo dyes being studied using the BP86, TPSS, B3LYP, PBE0, TPSSh, and PW6B95 density functionals in def2-TZVP basis sets. The obtained mean absolute deviations (MADs) indicate that the results of BP86, PBE0, and PW6B95 functionals are in good agreement with experimental values.     

Anodic stripping voltammetric determination of bismuth after solid-phase extraction using amberlite XAD-2 resin modified with 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol

A highly selective and sensitive anodic stripping differential pulse polarographic method has been developed for the determination of trace amount of bismuth in various samples after adsorption of its 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol complex on amberlite XAD-2 resin in the pH range of 2.0-3.0. The retained analyte on the resin recovered with 10.0 ml of 2 M hydrochloric acid and bismuth is determined by anodic stripping differential pulse polarography. In this case, 0.15 μg of bismuth can be concentrated in the column from 1100 ml of aqueous sample, where its concentration is as low as 0.14 ng ml⁻¹ and the linearity is maintained in the concentration range 0.05-160 μg ml⁻¹ in final solution with a correlation coefficient of 0.999 and relative standard deviation of ±1.2%. Various parameters such as the effect of pH, flow rate, and interference of number of metal ions on the determination of bismuth have been studied in detail to optimize the conditions for determination of bismuth in standard alloys: Nippon Keikinzoku Kogyo (NKK CRM No. 916 aluminum alloy); (NKK CRM No. 1021 Al, Si, Cu, Zn alloy); and (NKK CRM No. 920 aluminum alloy), biological samples: National Institute for Environmental Studies (NIES, No. 5 human hair; NIES, No. 7 tea leaves) and water samples: (spring water, river water; Kerman water; and Shiraz water).     

Synthesis,Antimicrobial, Anti-Virulence and Anticancer Evaluation of New 5(4H)-Oxazolone-Based Sulfonamides

Since the synthesis of prontosil the first prodrug shares their chemical moiety, sulfonamides exhibit diverse modes of actions to serve as antimicrobials, diuretics, antidiabetics, and other clinical applications. This inspiring chemical nucleus has promoted several research groups to investigate the synthesis of new members exploring new clinical applications. In this study, a novel series of 5(4H)-oxazolone-based-sulfonamides (OBS) 9a–k were synthesized, and their antibacterial and antifungal activities were evaluated against a wide range of Gram-positive and -negative bacteria and fungi. Most of the tested compounds exhibited promising antibacterial activity against both Gram-positive and -negative bacteria particularly OBS 9b and 9f. Meanwhile, compound 9h showed the most potent antifungal activity. Moreover, the OBS 9a, 9b, and 9f that inhibited the bacterial growth at the lowest concentrations were subjected to further evaluation for their anti-virulence activities against Pseudomonas aeruginosa and Staphylococcus aureus. Interestingly, the three tested compounds reduced the biofilm formation and diminished the production of virulence factors in both P. aeruginosa and S. aureus. Bacteria use a signaling system, quorum sensing (QS), to regulate their virulence. In this context, in silico study has been conducted to assess the ability of OBS to compete with the QS receptors. The tested OBS showed marked ability to bind and hinder QS receptors, indicating that anti-virulence activities of OBS could be due to blocking QS, the system that controls the bacterial virulence. Furthermore, anticancer activity has been further performed for such derivatives. The OBS compounds showed variable anti-tumor activities, specifically 9a, 9b, 9f and 9k, against different cancer lines. Conclusively, the OBS compounds can serve as antimicrobials, anti-virulence and anti-tumor agents.     

Solvent-Free Conditions as an Eco-Friendly Strategy for Synthesis of Organophosphorus Compounds

A series of diverse NH- and CH-acids are used for a one-pot synthesis of stable phosphorus ylides and 1,4-diionic organophosphorus compounds by trapping of the zwitterionic intermediate from the reaction between triphenylphosphine and dialkyl acetylenedicarboxylates under solvent-free conditions. The structural geometry for one of the products was confirmed by single crystal X-ray diffraction analysis.

Supplemental materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements to view the free supplemental file.     

Preparation and characterization of MNPs–PhSO3H as a heterogeneous catalyst for the synthesis of benzo[b]pyran and pyrano[3,2-c]chromenes

Research on Chemical Intermediates - In this study, an efficient and novel procedure has been reported for loading sulfanilic acid on the surface of magnetite Fe3O4 nanoparticles using...