Both-end opened nanostructure holes by embedded carbon nanotubes realized on thinned membranes on (1 0 0) silicon substrates

Vertically aligned carbon nanotubes (CNT) have been grown in a DC-PECVD apparatus on quartz membranes. 1 0 0-oriented Si wafer has been anisotropically etched in a KOH solution. A mixture of acetylene and hydrogen gases is used to grow CNT while Ni acts as the catalyst layer. As-grown structures have been coated by titanium dioxide using chemical vapor deposition at atmospheric pressure. By means of a polishing and ashing process steps followed by total removing of the quartz membrane both ends of CNTs are opened and nano holes are obtained. SEM analysis is used to study the evolution of such nanostructures.     

Phase Transition in the Compound NH3(CH2)5NH3TlCl5

Penthylene diammonium pentachlorothallate(III) exhibits a phase transition at 316 K <artwork name="GPHT21157eu1"> This transition has been characterized by optical birefringence, dielectric measurements differential scanning calorimetry and spectroscopic measurements on polycrystalline samples. The space group and the cell parameters of phase I were determined by X-ray diffraction from single crystals. Phase I has space group P2₁2₁2₁, with Z = 4, a = 7.696(3), b = 13.2890(17) and c = 13.503(18) Å. The transition is both displacive and order-disorder involving mainly conformational changes of the organic chain [NH₃(CH₂)₅NH₃]²⁺ coupled with distortion of the TlCl₆ octahedra. This behaviour and the crystal dynamics will be discussed and compared with those found in the literature for homologous compounds.     

Composition, antimicrobial and free-radical scavenging activities of the essential oil of Plectranthus marrubatus

Essential oil from the aerial part of Plectranthus marrubatus J. K. Morton (Lamiaceae), obtained by hydrodistillation was analyzed by gas chromatography/mass spectrometry (GC/MS) and evaluated for antimicrobial and free radical scavenging activities. Twenty-four compounds representing 99% of the total oil were identified. The major constituents were thymol, p-cymene and gamma-terpinene. The oil was tested against 21 bacterial and 4 fungal strains using the disc diffusion method and found to be active against a broad spectrum of pathogens including Gram-positive and Gram-negative bacteria as well as some fungal strains. The minimum inhibitory concentrations (MICs) of the oil against the bacterial strains tested ranged from 10 to 800 microg/mL, and from 400 to 800 microg/mL against the fungal strains employed. The in vitro antioxidant activity was assessed using 2,2-diphenyl-l-picrylhydrazil (DPPH) and showed a low EC50 value of 0.15 microl/mL. The study provides evidence for the broad-spectrum antimicrobial and antioxidant effect of Plectranthus marrubatus essential oil, and a possible explanation for its traditional use in the treatment of cold, fever, stomach disorder, diarrhea and as a skin cleaner.     

Electrosynthesis of TiO2 oxide film on ITO substrate and electrochemical comparative study of the oxide with its hydrated gel

Thin TiO₂ films obtained by cathodic electrosynthesis from an acidic aqueous bath containing TiOSO₄, H₂O₂ and KNO₃ on conductive glass indium tin oxide have been physically and electrochemically characterised. Secondary ion mass spectroscopy profile of the crystallised gel after heat treatment at 400 °C shows the presence of TiO₂ with traces of TiO and oxygen. X-ray patterns confirm the presence of anatase nanocrystallites for the annealed film and an amorphous structure for the non-annealed gel. Scattering electron microscopy surface micrographies reveal an opened porous nanostructure of the deposits. Cyclic voltammetry and impedance spectroscopic measurements reveal the different behaviour of the films obtained before and after the annealing, showing an important electrical activity of the non-annealed films. The dependence of capacitance values with potential in the anodic domain of depletion is obviously remarked from impedance plots for both gel and crystal forms of the film, which confirmed the fact that films obtained in this way have n-type properties. The potential of flat band equals −0.6 V/Ag/AgCl in pH range of 6.5 has been estimated according to Mott–Shottky curves for the crystallised oxide; meanwhile, the Mott–Shottky curve for the hydrated gel was nonlinear.     

Lagrangian approach for analysis of radiation pressure induced parametric instability in micro-resonators

We introduce a new scheme for determining radiation pressure coupling to microresonator devices. It is shown that for the input pump powers there exists a threshold value for instability behavior. Radiation pressure can couple mechanical modes of a cavity to it's optical modes, leading to parametric oscillation instability. Here we present an approximate analysis of such nonlinear effect with Hamilton's least action principle. Our Lagrangian includes no interaction term, but interaction between optical and mechanical modes has been taken into account through integration limit.     

Electron Transport in Quasi‐Two‐Dimensional Porous Network of Titania Nanoparticles,Incorporating Electrical and Optical Advantages in Dye‐Sensitized Solar Cells

The integration of fast electron transport and large effective surface area is critical to attaining higher gains in the nanostructured photovoltaic devices. Here, we report facilitated electron transport in the quasi‐two‐dimensional (Q2D) porous TiO₂. Liquid electrolyte dye‐sensitized solar cells were prepared by utilizing photoanodes based on the Q2D porous substructures. Due to electron confinement in a microscale porous medium, directional diffusion toward collecting electrode is induced into the electron transport. Our measurements based on the photocurrent and photovoltage time‐of‐flight transients show that at higher Fermi levels, the electron diffusion coefficient in the Q2D porous TiO₂ is about one order of magnitude higher when compared with the conventional layer of porous TiO₂. The results show that microstructuring of the porous TiO₂ leads to an approximately threefold improvement in the electron diffusion length. Such a modification may considerably affects the electrical functionality of moderate or low performance dye‐sensitized solar cells for which the internal gain or collection efficiency is typically low.     

Cavity-mediated stationary atom–mirror entanglement in the presence of photothermal effects

We study stationary entanglement properties of an optomechanical system containing an atomic ensemble. We focus onto the case of the movable mirror strongly coupled to the cavity field through both radiation pressure and photothermal force. Exploiting a quantum Langevin equation approach we investigate the bipartite entanglement properties of various bipartite subsystems as well as stationary tripartite entanglement of the system. We particularly study robustness of the atom–mirror entanglement against temperature. We show that, even though the photothermal force is a dissipative force, it can significantly improve the cavity mediated atom–mirror entanglement.     

Recent advances in nanomaterial‐based capillary electrophoresis

This review gives a summary of applications of different nanomateials, such as gold nanoparticles (AuNPs), carbon‐based nanoparticles, magnetic nanoparticles (MNPs), and nano‐sized metal organic frameworks (MOFs), in electrophoretic separations. This review also emphasizes the recent works in which nanoparticles (NPs) are used as pseudostationary phase (PSP) or immobilized on the capillary surface for enhancement of separation in CE, CEC, and microchips electrophoresis.