Chemoenzymatic synthesis of [3,9-C]-labeled NeuAc and KDN

The chemoenzymatic synthesis of ¹³C-labeled sialic acid (NeuAc) and 3-deoxy-d-glycero-d-galacto-2-nonulosonic acid (KDN) as useful molecular probes for studying the conformation of sialyl or KDN oligosaccharides attached to proteins was performed by using [6-¹³C]-ManNAc, [6-¹³C]-Man and [3-¹³C]-pyruvic acid sodium salt. In the synthesis of the compounds, 5,6-anhydro intermediates were found to easily provide not only 6-¹³C-labeled but also 5-, and 6-modified NeuAc and KDN analogs. Furthermore, it was demonstrated that identical results are obtained by NMR for both [3,9-¹³C]-NeuAc and 1:1 mixtures of [3-¹³C]- and [9-¹³C]-NeuAc.     

Radiation-induced solid-state polymerization of trioxane under high pressure

The in-source polymerization of trioxane in the solid state was investigated over a wide range of temperature and pressure, i.e., from 30 to 140°C and up to 7000 kg/cm², respectively. In the polymerization that was carried out slightly below the melting point under pressure, the higher the pressure, the higher the rate of polymerization. It was confirmed that the maximum rate of solid-state polymerization of trioxane occurs near the melting points, even under elevated pressure. The rate of polymerization decreased with increasing pressure at constant temperature. The shape of the time–conversion curves may be classified into two types, i.e., one which is typical of high pressure and low temperature, and the other which is typical of low pressure and high temperature. Changes in the shape of the conversion—intrinsic viscosity curves occurred coincidentally. Thus, three regions for the different “polymerization characteristic” were determined as functions of polymerization temperature and pressure. Explanations are given for the above-mentioned polymerization characteristic.     

Aqueous phase behavior of a 1-O-phytanyl-beta-D-xyloside/water system. Glycolipid-based bicontinuous cubic phases of crystallographic space groups Pn3m and Ia3d

Temperature- and concentration-dependent aqueous phase diagram of a novel alkylglycoside, 1-O-phytanyl-beta-D-xyloside (beta-Xyl(Phyt)), was studied using small-angle X-ray scattering, polarizing optical microscopy, and differential scanning calorimetry. The phases found in this system include an Lc phase, an Lalpha phase, an HII phase, two inverted cubic phases of crystallographic space groups Pn3m and Ia3d, and a fluid isotropic phase, FI. The phase diagram of the beta-Xyl(Phyt)/water system is similar to that for the 1-monooleylglycerol (MO)/water system, suggesting that the phase behavior is largely determined by the overall molecular shape rather than the details of surfactant molecular structure. Moreover, the structural parameters of the beta-Xyl(Phyt) liquid crystals are also similar to those of the MO/water, due primarily to the similar molecular dimensions of two molecules. As compared to the MO/water system, however, the beta-Xyl(Phyt)/water system displays a lower value of TK ( approximately 8.(5) degrees C) and a wider temperature window for the mesophases (8.(5)-120 degrees C). Moreover, beta-Xyl(Phyt) is chemically more robust than MO, as the ether linkage is more stable against hydrolysis than the ester linkage and the phytanyl chain is fully saturated.     

Dynamical study of femtosecond-laser-ablated liquid-aluminum nanoparticles using spatiotemporally resolved x-ray-absorption fine-structure spectroscopy

We study the temperature evolution of aluminum nanoparticles generated by femtosecond laser ablation with spatiotemporally resolved x-ray-absorption fine-structure spectroscopy. We successfully identify the nanoparticles based on the L-edge absorption fine structure of the ablation plume in combination with the dependence of the edge structure on the irradiation intensity and the expansion velocity of the plume. In particular, we show that the lattice temperature of the nanoparticles is estimated from the L-edge slope, and that its spatial dependence reflects the cooling of the nanoparticles during plume expansion. The results reveal that the emitted nanoparticles travel in a vacuum as a condensed liquid phase with a lattice temperature of about 2500 to 4200 K in the early stage of plume expansion.     

Synthesis and radical ring-opening polymerization behavior of vinylcyclopropane bearing six-membered cyclic acetal moiety

Synthesis and radical ring-opening polymerization of vinylcyclopropane bearing six-membered cyclic acetal moiety, 1-vinyl-4,8-dioxaspiro[2.5]octane (1), were carried out. 1 was prepared by the reaction of 1,1-dichloro-2-vinylcyclopropane and 1,3-propanediol in DMF in the presence of a base. Radical polymerization of 1 was carried out in the presence of an appropriate initiator (3 mol % vs. 1) at 60 and 120°C in degassed sealed ampoules for 20 h. A colorless transparent viscous polymer was obtained by the isolation with preparative HPLC. The structure of poly(1) was determined to consist of two 1,5-ring-opened units and a unit bearing no olefinic moiety. The difference of the activation energies for the ring-opening reaction of the cyclopropane ring calculated by the molecular orbital method could explain the selectivity in the direction of the cleavage of the cyclopropane ring. Acid hydrolysis of poly(1) afforded the corresponding polyketone in quantitative conversion. © 1996 John Wiley & Sons, Inc.     

Long-lived ultrafast spin precession in manganese alloys films with a large perpendicular magnetic anisotropy

Spin precession with frequencies up to 280 GHz is observed in Mn(3-δ)Ga alloy films with a perpendicular magnetic anisotropy constant K(u)～15 M?erg/cm(3). The damping constant α, characterizing macroscopic spin relaxation and being a key factor in spin-transfer-torque systems, is not larger than 0.008 (0.015) for the δ=1.46 (0.88) film. Those are about one-tenth of α values for known materials with large K(u). First-principles calculations well describe both low α and large K(u) for these alloys.     

A system for measuring absolute frequencies of up to 4.25 THz using a Josephson point contact

A system for measuring the absolute frequency of a far-infrared (FIR) laser is described. Josephson point contacts have been utilized in the system as a frequency harmonic mixer connecting microwaves and optically pumped CH₃OH laser lines. The Josephson point contacts are capable of generating beat signals of 90 GHz microwaves and FIR waves of up to 4.25 THz. To measure the frequency of the beat signals from the Josephson junction with a frequency counter, tracking oscillators have been developed, which tracks the beat signals by phase locking and regenerate clean signals for frequency counting. It is shown that the absolute frequency can be measured to an accuracy of about 100 Hz by using the tracking oscillators.     

Effective Application of Microwave Resonant Cavity System to Flow Chemistry

By applying advanced telecommunication solid state devices to microwave (MW) resonant cavity system for flow chemistry, it becomes possible to heat up low polarity solvents higher than 250 C, that are considered impossible to heat up by MW until now. The resonant cavity system is opening new process windows to production processes of specialty chemicals which require low cost, high yield and high productivity.     

New many body perturbation method and the Hubbard model

By adapting the functional derivative method developed by Kadanoff and Baym to the Hubbard model, a new perturbation method is formulated. The unperturbed state is defined by the two equations which yield Hubbard's results, while the remainder is given by functional derivatives of the Green's functions which are shown to generate a complete perturbation series. Advantages of this method are discussed.