Voltage-dependent anion channel transports calcium ions through biomimetic membranes

The mitochondrial outer membrane channel (VDAC), a central player in mitochondria and cell death, was reconstituted in polymer-supported phospholipid bilayers. Highly purified VDAC was first reconstituted in vesicles; channel properties and NADH-ferricyanide reductase activity were ascertained before deposition onto solid substrates. 1-Palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine/1,2-distearoyl-sn-glycero-3-phosphoethanolamine-poly(ethylene glycol)-N-hydroxysuccinimide mixed vesicles containing VDAC were linked onto amine-grafted surfaces (glass and gold) and disrupted to form a VDAC-containing polymer-tethered planar bilayer. Surface plasmon spectroscopy, fluorescence microscopy, and atomic force microscopy measurements ascertained the membrane thickness, fluidity, and continuity. VDAC reconstituted in bilayers efficiently transported calcium ions and was modulable by two channel blockers, 4,4'-diisothiocyanatostilbene-2,2'-disulfonic acid and l-glutamate. The novel setup may allow the study of the assembly of a polyprotein complex centered on VDAC and its role in mitochondrial biology, calcium fluxes, and apoptosis.     

Crystal structure and photochemical behavior in solution of the 3'-N-sulfamate analogue of thymidylyl(3'-5')thymidine

The 3'-N-sulfamate analogue of thymidylyl(3'-5')thymidine (TnsoT, 1) exhibits a preference for a C3'-endo conformation in the solution and solid states. Its photochemical behavior in solution is compared to that of its natural counterpart, thymidylyl(3'-5')thymidine (TpT, 2), to get further insight into the significance of the C3'-endo conformation on the photoproduct formation at the single-stranded dinucleotide level. Irradiation at 254 nm of 1 led to the same type of photoproducts as observed with 2. However, 1 was significantly more photoreactive than 2, and accordingly, the initial rate of photoproduct formation was enhanced in accordance with its propensity to base stack compared to 2. The corresponding quantum yields were determined and showed that the enhancement factor (1 compared to 2) is moderate for the cyclobutane pyrimidine dimer (CPD) (1.26) and much higher for the (6-4) photoproduct (1.8). These data strongly suggest that the CPD and (6-4) photoproduct arise from distinct minor stacked conformations.     

Development and optimization of ultra-high performance supercritical fluid chromatography mass spectrometry method for high-throughput determination of tocopherols and tocotrienols in human serum

The goal of this study was to develop an effective supercritical fluid chromatography method using single quadrupole MS for analysis of all isomeric forms of vitamin E. Finally, two fast and effective methods, the high resolution one and the high speed one, for the determination of 8 vitamin E isomers in human serum were developed.     

In vitro determination of the release kinetics of peptides and free amino acids during the digestion of food proteins

The kinetics of peptide release during in vitro digestion of 4 protein sources (casein, cod protein, soy protein, and gluten) were investigated. Samples were sequentially hydrolyzed with pepsin (30 min) and pancreatin (2, 4, or 6 h) in a dialysis cell with continuous removal of digestion products. Nondialyzed digests were fractionated by ion-exchange chromatography and ultrafiltration. Animal proteins were digested at a greater rate than plant proteins. Target amino acids of specific enzymes appeared more rapidly in the dialyzed fractions when compared to other amino acids. Throughout the hydrolysis, nondialyzed digests contained a higher proportion of peptide mixtures with basic-neutral properties. Except for gluten, peptide fractions with molecular weights that exceeded 10 kDa (basic-neutral, BN > 10) were rapidly hydrolyzed during the first 2 h of pancreatin digestion. The kinetics of release and the composition of peptide fractions were different when the protein sources were compared. The analysis of amino acids revealed that threonine and proline proportions were relatively high in BN > 10 and in peptide fractions with molecular weight between 10-1 kDa (BN 10-1), while tyrosine, phenylalanine, lysine, and arginine predominated in the low molecular weight (<1 kDa) fractions. More resistant peptides were generally rich in proline and glutamic acid. The role of in vitro digestion assays in dietary protein quality evaluation is discussed.     

Synthesis of highly functionalized furanones via aldol reaction of 3-silyloxyfurans

[reaction: see text] The stereoselective aldol reaction of 3-silyloxyfurans with aldehydes in the presence of a Lewis acid is described. N-Bromosuccinimide (NBS)-mediated cyclization of the aldol product leads to the formation of the 2,7-dioxa-bicyclo[2.2.1]heptan-3-one ring system, which represents the formal product of hetero Diels-Alder reaction of the furan with the aldehyde.     

Effect of explicit cationic size and valence constraints on the phase stability of 1:2 B-site-ordered perovskite ruthenates

The related parameters of cation size and valence that control the crystallization of Sr(3)CaRu(2)O(9) into a 1:2 B-site-ordered perovskite structure were explored by cationic substitution at the strontium and calcium sites and by the application of high pressure. At ambient pressures, Sr(3)MRu(2)O(9) stoichiometries yield multiphasic mixtures for M = Ni(2+), Mg(2+), and Y(3+), whereas pseudocubic perovskites result for M = Cu(2+) and Zn(2+). For A-site substitutions, an ordered perovskite structure results for Sr(3-x)Ca(x)CaRu(2)O(9), with 0 相似文献   

Chromium‐Mediated Dearomatization: Application to the Synthesis of Racemic 15‐Acetoxytubipofuran and Asymmetric Synthesis of Both Enantiomers

An efficient dearomatization process of [Cr(arene)(CO)₃] complexes initiated by a nucleophilic acetaldehyde equivalent is detailed. It generates in a one‐pot reaction three C? C bonds and two stereogenic centers. This process allowed a rapid assembly of a cis‐decalin ring system incorporating a homoannular diene unit in just two steps starting from aromatic precursors (Scheme 2). The method was applied to the total synthesis of the eudesmane‐type marine furanosesquiterpene (±)‐15‐acetoxytubipofuran ( 2 ). Two routes were successfully used to synthesize the γ‐lactone precursor of the furan ring. The key step in the first approach was a Pd‐catalyzed allylic substitution (Scheme 3), while in the second approach, an Eschenmoser–Claisen rearrangement was highly successful (Scheme 4). The Pd‐catalyzed allylic substitution could be directed to give either the (normal) product with overall retention as major diastereoisomer or the unusual product with inversion of configuration (see Table). For the synthesis of the (?)‐enantiomer (R,R)‐ 2 of 15‐acetoxytubipofuran, an enantioselective dearomatization in the presence of a chiral diether ligand was implemented (Scheme 7), while the (+)‐enantiomer (S,S)‐ 2 was obtained via a diastereoselective dearomatization of an arene‐bound chiral imine auxiliary (Scheme 8). Chiroptical data suggest that a revision of the previously assigned absolute configuration of the natural product is required.     

Structural and magnetic properties of the solid solution () YMn1−x(Cu3/4Mo1/4)xO3

Recently, the ferroelectromagnet YMnO₃ has been the focus of interest because it exhibits both antiferromagnetism (Néel temperature 80 K) and ferroelectricity (Curie temperature 914 K). There have been no reports of complete YMn_1−xM_xO₃ solid solutions in which substitution of the foreign M cation preserves the hexagonal P6₃cm structure. In contrast there exist several homeotypic phases with the general formula, Ln_1+nCu_nMO_3+3n (n=1 (M=Ti), 2 (M=V) and 3 (M=Mo); Ln: lanthanide). Several YMn_1−x(Cu_3/4Mo_1/4)_xO₃ compounds have been synthesized. The solid solution, from YMnO₃ (x=0) to YCu_3/4Mo_1/4O₃ (x=1) has been characterized by X-ray diffraction and transmission electron microscopy study. For 0<x<0.9, the compounds are found to crystallize in the non-centrosymmetric structure, space group P6₃cm, of YMnO₃. The Mn-free end member, x=1, crystallizes in a complex multiple cell, the superstructure being associated to Cu³⁺/Mo⁶⁺ cationic ordering. Dilution of the Mn³⁺ magnetic array by the paramagnetic (Cu²⁺) and diamagnetic (Mo⁶⁺) cations is found to decrease the antiferromagnetic ordering temperature and it becomes undetectable for x0.5 compositions.     

The Effects of Formulation on Imidacloprid Dissipation in Grapes and Vine Leaves and on Required Pre-Harvest Intervals under Lebanese Climatic Conditions

In this study, imidacloprid, a systemic insecticide, currently having a specified European Commission MRL value for vine leaves (2 mg kg⁻¹), was applied on a Lebanese vineyard under different commercial formulations: as a soluble liquid (SL) and water dispersible granules (WDG). In Lebanon, many commercial formulations of imidacloprid are subject to the same critical good agricultural practice (cGAP). It was, therefore, important to verify the variability in dissipation patterns according to matrix nature and formulation type. Random samplings of grapes and vine leaves were performed starting at 2 days until 18 days after treatment. Residue extractions were performed according to the QuEChERS method and the analytical determination using liquid chromatography coupled to tandem mass spectrometry (LC-MS-MS). The SL formulation yielded significantly higher initial deposit than the WDG formulation on grapes and vine leaves. The formulation type did not significantly affect the dissipation rates; the estimated half-lives in grapes and vine leaves were 0.5 days for all imidacloprid formulations. No pre-harvest intervals were necessary on grapes. PHIs of 3.7 days for the SL formulation and 2.8 days for the WDG formulation were estimated on vine leaves. The results showed that the type of formulation and the morphological and physiological characteristics of the matrix had an effect on the initial deposits, and thus residue levels, but not on the dissipation patterns.