Rearrangement of 2-aryl-3,3-dichloroazetidines: intermediacy of 2-azetines

An easy synthesis of 2-aryl-3,3-dichloroazetidines, a rather unexplored class of azaheterocycles, is described. The title compounds were easily obtained by reduction of the corresponding 4-aryl-3,3-dichloro-2-azetidinones with monochloroalane, which in turn were synthesized by a ketene-imine [2 + 2] cycloaddition. The reactivity of 3,3-dichloroazetidines with bases was investigated, yielding 2-[dimethoxy(aryl)methyl]aziridines by ring contraction when treated with sodium methoxide. Furthermore, reacting the 3,3-dichloroazetidines with sodium hydride in DMSO, followed by aqueous workup, afforded 1-alkyl-2-aroylaziridines, by hydrolysis of the intermediate 2-azetines and ring closure of the transient 3-amino-2-chloro-1-phenyl-1-propanone derivatives. Monitoring this reaction in an NMR tube, using sodium hydride in DMSO-d(6), allowed the characterization of the intermediate strained heterocyclic enamines, i.e., 2-azetines, by (1)H and (13)C NMR.     

Über die dilatometrisch indizierten Titrationen

With the help of a dilatometer which permits the continuous determination of volume changes occuring in chemical reactions in aqueous solutions, the volume change during the precipitation of BaSO₄ was followed and applied to the determination of the endpoint of the precipitation. In the case of precipitations of 1 mM BaSO₄ the end-point determination can be reproduced with a standard deviation of less than 0.2%. A strict linearity between the amount of Na₂SO₄ applied and the position of the end-point does not exist. However, a correction factor could be established, so that the absolute determination of sulphate is possible (standard deviation 0.2%). The time required to carry out a single measurement is about 1.5 min. The acid concentration does not influence the composition. On the other hand, the composition was shown to be considerably dependent on Na⁺ and NH₄ ⁺ ions. The presence of the cation N(CH₃)₄ ⁺ does not alter the composition of the precipitate. It is obviously too big to substitute the Ba²⁺ ion.     

The Reactivity of Cr‐Te Superlattice Reactants and of Co‐deposited Cr‐Te Films: Studies with in‐situ X‐ray Diffractometry

The reactivity of a Cr‐Te multilayer film consisting of 326 Cr/Te double‐layers with about 88(3) at% Te was investigated with in‐situ X‐ray diffraction. The occurrence of a superstructure reflection caused by the multilayer system is observed. During the annealing procedure between 80 and 90 °C the layer‐by‐layer arrangement is destroyed and elemental Te crystallizes. After 6 h isothermal annealing at 140 °C CrTe₃ starts to crystallize. The amount and the crystal size of CrTe₃ increase with raising temperature and Te is consumed during the growth process. At 220 °C the formation of crystalline Cr₂Te₃ is observed and between 220 and 260 °C CrTe₃ is completely decomposed into Cr₂Te₃. The two Cr tellurides grow as highly textured materials. The size of CrTe₃ crystals is significantly larger than that of Cr₂Te₃. For a co‐deposited Cr‐Te film with composition 77(3) at% Te the tri‐telluride and elemental Te crystallize simultaneously. The texture of CrTe₃ is less pronounced and different reflections of the tri‐telluride occur besides the (h00)‐reflections. Up to 160 °C a pronounced increase of the crystallite size is observed and the crystals are significantly larger than those obtained with the multifilm sample. At 130 °C the crystallization kinetics seem to be controlled by nucleation.     

The simplest coronoids: Hollow hexagons

Hollow hexagons form a subclass of primitive coronoid systems. The macrocyclic aromatic hydrocarbon kekulene corresponds to a hollow hexagon. The hollow hexagons for given numbers of hexagonal units (h) were enumerated by computer aid, but also an analytical solution for the numbers of hollow hexagons was achieved. For the Kekulé structure counts (k) of a hollow hexagon a general formula is reported. Also the maximum and minimumK numbers are considered.This article is Part VI of the series Enumeration and Classification of Coronoid Hydrocarbons. For Part V, see ref. [36].     

Ethylene tetramerization: a new route to produce 1-octene in exceptionally high selectivities

Linear alpha-olefins, such as 1-hexene and 1-octene, are important comonomers in the production of linear low-density polyethylene (LLDPE). The conventional method of producing 1-hexene and 1-octene is by oligomerization of ethylene, which yields a wide spectrum of linear alpha-olefins (LAOs). While there exists several processes for producing 1-hexene via ethylene trimerization, a similar route for the selective production of 1-octene has so far been elusive. We now, for the first time, report an unprecedented ethylene tetramerization reaction that produces 1-octene in selectivities exceeding 70%, using an aluminoxane-activated chromium/((R2)2P)2NR1 catalyst system.     

Synthesis and structural revision of naturally occurring ayapin derivatives

The synthesis of three highly oxygenated naturally occurring coumarins, 8-methoxy-6,7-methylenedioxycoumarin, 5-methoxy-6,7-methylenedioxycoumarin and 5,8-dimethoxy-6,7-methylenedioxycoumarin is described for the first time, together with a new method for the preparation of ayapin (6,7-methylenedioxycoumarin). Comparison of the spectroscopic data of the synthetic tetraoxygenated coumarin 5,8-dimethoxy-6,7-methylenedioxycoumarin with literature reports resulted in the structural revision of several natural coumarins. Two coumarins, both identified as 5,8-dimethoxy-6,7-methylenedioxycoumarin must have other structures, while the structure of another coumarin, described as the isomeric 7,8-dimethoxy-5,6-methylenedioxycoumarin has to be revised to 5,8-dimethoxy-6,7-methylenedioxycoumarin.     

Thermodynamic analysis of lysozyme adsorbed to silica

The structural stability of hen egg white lysozyme in solution and adsorbed to small colloidal silica particles at various surface concentrations was investigated using hydrogen-deuterium (H/D) exchange in combination with mass spectrometry (HDX-MS) and differential scanning calorimetry (DSC). The combination of HDX-MS and DSC allows a full thermodynamic analysis of the lysozyme structure as both the enthalpy and the Gibbs free energy can be derived from the various measurements. Moreover, both HDX-MS and DSC provide information on the relative structural heterogeneity of lysozyme in the adsorbed state compared to that in solution. Results demonstrated that at high surface coverage, the structural stability of lysozyme was only marginally affected by adsorption to silica particles whereas the unfolding enthalpy decreased by more than 10%, meaning that the entropy of lysozyme increased with a similar value upon adsorption. Furthermore, the structural heterogeneity increased considerably. At lower surface concentrations, the structural heterogeneity increased further whereas the enthalpy of unfolding decreased. Further analyses of the HDX-MS experiments clearly indicated that folding/unfolding of lysozyme occurs through a two-domain process. These two domains had a similar amount of structural elements and a difference in stabilization energy of 8 kJ/mol, regardless if lysozyme was in solution or adsorbed to silica.     

Synthesis and structures of cis- and trans-bis(alkyneselenolato)platinum(II) complexes

The reaction of 2 equiv of LiSeCC-n-C(5)H(11) (1) with cis-PtCl(2)(Ph(3)P)(2) (2) gives a mixture of the cis and trans isomers of Pt(Ph(3)P)(2)(SeCC-n-C(5)H(11))(2) (3), which slowly isomerizes in CH(2)Cl(2) to the preferred trans form trans-3. The closely related cis-[Pt(dppf)(2)(SeCC-n-C(5)H(11))(2)] (4) (dppf = bis(diphenylphosphino)ferrocene) was prepared by a similar metathetical reaction using the platinum chloride complex of the chelating dppf to impose the cis geometry. The structures of the cis and trans complexes have been investigated in solution by heteronuclear NMR ((31)P, (77)Se, and (195)Pt) and, in the cases of trans-3 and 4, characterized in the solid state by single-crystal X-ray diffraction. Changing the coordination geometry from cis to trans induces significant changes in the structural and spectroscopic parameters, which do not comply with the previously anticipated donor-acceptor properties of selenolate ligands.     

Superconductivity in copper, silver, and gold compounds

High-temperature superconductivity exists in layered, square-planar cuprates, but is almost absent in most other Cu(II) compounds and in most Ag(II) and Au(II) compounds. Valence state II is quite unusual in silver and gold and often disproportionates to valence states I and III ("negative-U compounds"). The two-electron difference in oxidation state is suggestive of electron pairing, a prerequisite for superconductivity. In the present paper the connection between disproportionation and geometrical structure on one hand and superconductivity on the other is discussed by using the accepted theory for mixed valence complexes. It is concluded that absence of superconductivity in gold and silver compounds can be connected to the instability of oxidation state II and the large difference in equilibrium geometry between oxidation states I and III.