Pressure induced phase transformations and band structure of different high pressure phases in tellurium

We report here high-pressure x-ray diffraction (XRD) studies on tellurium (Te) at room temperature up to 40 GPa in the diamond anvil cell (DAC). The XRD measurements clearly indicate a sequence of pressure-induced phase transitions with increasing pressure. The data obtained in the pressure range 1 bar to 40 GPa fit five different crystalline phases out of Te: hexagonal Te (I) → monoclinic Te(II) → orthorhombic Te (III) → Β-Po-type Te(IV) → body-centered-cubic Te(V) at 4, 6.2, 11 and 27 GPa, respectively. The volume changes across these transitions are 10%, 1.5%, 0.3% and 0.5%, respectively. Self consistent electronic band structure calculations both for ambient and high pressure phases have been carried out using the tight binding linear muffin tin orbital (TB-LMTO) method within the atomic-sphere approximation (ASA). Reported here apart from the energy band calculations are the density of states (DOS), Fermi energy (E _f) at various high-pressure phases. Our calculations show that the ambient pressure hexagonal phase has a band gap of 0.42 eV whereas high-pressure phases are found to be metallic. We also found that the pressure induced semiconducting to metallic transition occurs at about 4 GPa which corresponds to the hexagonal phase to monoclinic phase transition. Equation of state and bulk modulus of different high-pressure phases have also been discussed.     

Unexpected cycloadducts from 1,3-dipolar cycloaddition of 3,4-dehydromorpholine N-oxide to N-cinnamoyl piperidines—first report of the novel formation of 2:1 cycloadducts

A series of unexpected cycloadducts along with normal cycloadducts have been isolated from the 1,3-dipolar cycloaddition of 3,4-dehydromorpholine N-oxide to piperidides of cinnamic acid and para-substituted cinnamic acids and these were analyzed by X-ray crystallography to reveal novel solid-state structures. At first, 1:1 cycloadducts were formed which underwent in situ nucleophilic attack by another reduced nitrone moiety. A plausible iminium-oxonium ion mechanism has been proposed.     

Conjugated Polymer Nanoparticle‐Triplet Emitter Hybrids in Aqueous Dispersion: Fabrication and Fluorescence Quenching Behavior

Conjugated polymer nanoparticles based on poly[9,9‐bis(2‐ethylhexyl)fluorene] and poly[N‐(2,4,6‐trimethylphenyl)‐N,N‐diphenylamine)‐4,4′‐diyl] are fabricated using anionic surfactant sodium dodecylsulphate in water by miniemulsion technique. Average diameters of polyfluorene and polytriarylamine nanoparticles range from 70 to 100 and 100 to 140 nm, respectively. The surface of the nanoparticles is decorated with triplet emitting dye, tris(2,2′‐bipyridyl)ruthenium(II) chloride. Intriguing photophysics of aqueous dispersions of these hybrid nanoparticles is investigated. Nearly 50% quenching of fluorescence is observed in the case of dye‐coated polyfluorene nanoparticles; excitation energy transfer is found to be the dominant quenching mechanism. On the other hand, nearly complete quenching of emission is noticed in polytriarylamine nanoparticle‐dye hybrids. It is proposed that the excited state electron transfer from the electron‐rich polytriarylamine donor polymer to Ru complex leads to the complete quenching of emission of polytriarylamine nanoparticles. The current study offers promising avenues for developing aqueous solution processed‐electroluminescent devices involving a conjugated polymer nanoparticle host and Ru or Ir‐based triplet emitting dye as the guest.

     

Trapping a Silicon(I) Radical with Carbenes: A Cationic cAAC–Silicon(I) Radical and an NHC–Parent-Silyliumylidene Cation

The trapping of a silicon(I) radical with N-heterocyclic carbenes is described. The reaction of the cyclic (alkyl)(amino) carbene [cAAC_Me] (cAAC_Me=:C(CMe₂)₂(CH₂)NAr, Ar=2,6-iPr₂C₆H₃) with H₂SiI₂ in a 3:1 molar ratio in DME afforded a mixture of the separated ion pair [(cAAC_Me)₂Si:^.]⁺I⁻ ( 1 ), which features a cationic cAAC–silicon(I) radical, and [cAAC_Me−H]⁺I⁻. In addition, the reaction of the NHC–iodosilicon(I) dimer [I_Ar(I)Si:]₂ (I_Ar=:C{N(Ar)CH}₂) with 4 equiv of I_Me (:C{N(Me)CMe}₂), which proceeded through the formation of a silicon(I) radical intermediate, afforded [(I_Me)₂SiH]⁺I⁻ ( 2 ) comprising the first NHC–parent-silyliumylidene cation. Its further reaction with fluorobenzene afforded the C_Ar−H bond activation product [1-F-2-I_Me-C₆H₄]⁺I⁻ ( 3 ). The isolation of 2 and 3 confirmed the reaction mechanism for the formation of 1 . Compounds 1 – 3 were analyzed by EPR and NMR spectroscopy, DFT calculations, and X-ray crystallography.     

Pressure field due to drag reducing outer layer devices in turbulent boundary layers

The wall static pressure in the vicinity of drag reducing outer layer devices in flat wall turbulent boundary layers has been measured and compared with an inviscid theory. Symmetric and cambered airfoil devices have been examined at small angles of attack and very low chord Reynolds numbers. Airfoil devices impose a sequence of strong favorable and adverse pressure gradients on the boundary layer whose drag is to be reduced. At very small angles of attack (± 2°), this pressure field extends up to about three chord lengths downstream of the trailing edge of an airfoil device. Also examined are the pressures on the upper and lower surfaces of a symmetric airfoil device in the freestream and near the wall. The freestream pressure distribution around an airfoil section is altered by the wall proximity. The relevance of lift enhancement caused by wall proximity to drag reduction has been discussed. The pressure distributions on the flat wall beneath the symmetric airfoil devices are predicted well by the inviscid theory. However, the remaining pressure distributions are predicted only qualitatively, presumably because of strong viscous effects.     

Calibration transfer between electronic nose systems for rapid In situ measurement of pulp and paper industry emissions

Electronic nose systems when deployed in network mesh can effectively provide a low budget and onsite solution for the industrial obnoxious gaseous measurement. For accurate and identical prediction capability by all the electronic nose systems, a reliable calibration transfer model needs to be implemented in order to overcome the inherent sensor array variability. In this work, robust regression (RR) is used for calibration transfer between two electronic nose systems using a Box–Behnken (BB) design. Out of the two electronic nose systems, one was trained using industrial gas samples by four artificial neural network models, for the measurement of obnoxious odours emitted from pulp and paper industries. The emissions constitute mainly of hydrogen sulphide (H₂S), methyl mercaptan (MM), dimethyl sulphide (DMS) and dimethyl disulphide (DMDS) in different proportions. A Box–Behnken design consisting of 27 experiment sets based on synthetic gas combinations of H₂S, MM, DMS and DMDS, were conducted for calibration transfer between two identical electronic nose systems. Identical sensors on both the systems were mapped and the prediction models developed using ANN were then transferred to the second system using BB–RR methodology. The results showed successful transmission of prediction models developed for one system to other system, with the mean absolute error between the actual and predicted concentration of analytes in mg L⁻¹ after calibration transfer (on second system) being 0.076, 0.1801, 0.0329, 0.427 for DMS, DMDS, MM, H₂S respectively.     

Modification of proteins with cyclodextrins prevents aggregation and surface adsorption and increases thermal stability

This work describes a general approach for preventing protein aggregation and surface adsorption by modifying proteins with β-cyclodextrins (βCD) via an efficient water-driven ligation. As compared to native unmodified proteins, the cyclodextrin-modified proteins (lysozyme and RNase A) exhibit significant reduction in aggregation, surface adsorption and increase in thermal stability. These results reveal a new chemistry for preventing protein aggregation and surface adsorption that is likely of different mechanisms than that by modifying proteins with poly(ethylene glycol).     

Conformational fluctuations of a protein-DNA complex and the structure and ordering of water around it

Protein-DNA binding is an important process responsible for the regulation of genetic activities in living organisms. The most crucial issue in this problem is how the protein recognizes the DNA and identifies its target base sequences. Water molecules present around the protein and DNA are also expected to play an important role in mediating the recognition process and controlling the structure of the complex. We have performed atomistic molecular dynamics simulations of an aqueous solution of the protein-DNA complex formed between the DNA binding domain of human TRF1 protein and a telomeric DNA. The conformational fluctuations of the protein and DNA and the microscopic structure and ordering of water around them in the complex have been explored. In agreement with experimental studies, the calculations reveal conformational immobilization of the terminal segments of the protein on complexation. Importantly, it is discovered that both structural adaptations of the protein and DNA, and the subsequent correlation between them to bind, contribute to the net entropy loss associated with the complex formation. Further, it is found that water molecules around the DNA are more structured with significantly higher density and ordering than that around the protein in the complex.     

Dynamic properties of water around a protein-DNA complex from molecular dynamics simulations

Formation of protein-DNA complex is an important step in regulation of genes in living organisms. One important issue in this problem is the role played by water in mediating the protein-DNA interactions. In this work, we have carried out atomistic molecular dynamics simulations to explore the heterogeneous dynamics of water molecules present in different regions around a complex formed between the DNA binding domain of human TRF1 protein and a telomeric DNA. It is demonstrated that such heterogeneous water motions around the complex are correlated with the relaxation time scales of hydrogen bonds formed by those water molecules with the protein and DNA. The calculations reveal the existence of a fraction of extraordinarily restricted water molecules forming a highly rigid thin layer in between the binding motifs of the protein and DNA. It is further proved that higher rigidity of water layers around the complex originates from more frequent reformations of broken water-water hydrogen bonds. Importantly, it is found that the formation of the complex affects the transverse and longitudinal degrees of freedom of surrounding water molecules in a nonuniform manner.     

MRDCI study of the low-lying electronic states of PbSi

Electronic states of the PbSi molecule up to 4 eV have been studied by carrying out ab initio based MRDCI calculations which include relativistic effective core potentials (RECPs) of both the atoms. The use of semicore RECPs of Pb produces better dissociation limits than the full-core one. However, the (3)P(0)-(3)P(1) splitting due to Pb is underestimated by about 4000 cm(-1). At least 25 bound electronic states of the Λ-S symmetry are predicted for PbSi. The computed zero-field-splitting in the ground state is about 544 cm(-1). A strong spin-orbit mixing changes the nature of the potential energy curves of many Ω states. The overall splitting among the spin components of A(3)Π is computed to be 4067 cm(-1). However, the largest spin-orbit splitting is reported for the (3)Δ state. A number of spin-allowed and spin-forbidden transitions are predicted. The partial radiative lifetime for the A(3)Π-X(3)Σ(-) transition is of the order of milliseconds. The computed bond energy in the ground state is 1.68 eV, considering the spin-orbit coupling. The vertical ionization energy for the ionization to the X(4)Σ(-) ground state of PbSi(+) is about 6.93 eV computed at the same level of calculations.